• 제목/요약/키워드: Residential architecture

검색결과 940건 처리시간 0.023초

모듈러 주택을 위한 자동 센서 감지기반 홈자동화 제어보드 개발 (Development of Automatic Sensor Detecting-based Home Automation Control Board for Modular Housing)

  • 마성훈;김병서
    • 한국인터넷방송통신학회논문지
    • /
    • 제17권6호
    • /
    • pp.33-39
    • /
    • 2017
  • 오늘날 모듈러 건축 방식으로 주거시설에 대한 설계와 건설이 이루어지고 있다. 이러한 모듈러 기반의 주거시설에서는 자유로운 공간의 변형이 필요시 발생하기 때문에 홈 자동화 시스템에 대해서도 새로운 방식의 도입이 필요할 것으로 예상되어진다. 즉 기존의 홈자동화 시스템에서는 사전에 계획된 자동화 설계에 따라 유선 센서들을 기반으로 개발되어지고 있는데 공간의 변화가 이루어지는 모듈러 방식에서는 기존의 고정이면서 유선 방식의 센서 기반의 자동화 시스템은 적합하지 않을 것으로 판단된다. 따라서 모듈러 건축 방식에서는 역동적인 공간 변화에 따라 필요 센서들의 수와 종류가 변화고 센서의 위치도 변화기 때문에 이러한 다양한 변경 요소를 자동적으로 받아들여 홈자동화 시스템을 구축하는 시스템이 필요하다. 따라서 본 논문에서는 모듈러 건축 방식으로 구축된 주거시설에서 센서 인식을 자동으로 할 수 있고, 사용자 인터페이스를 자동으로 생성하여 변화하는 공간에 적응하는 홈자동화 시스템을 연구 개발하였다.

농촌지역 공공보건시설의 잠재적 접근성 측정 (Potential Accessibility of Public Healthcare Facilities in Rural Areas)

  • 이준모;조순철;황정임
    • 농촌지도와개발
    • /
    • 제20권2호
    • /
    • pp.431-450
    • /
    • 2013
  • 본 연구의 목적은 우리나라 농촌지역 공공보건시설의 잠재적 접근성을 측정하고 지역 간의 차이를 분석하는 것이다. 공공보건시설의 수요에 해당하는 인구를 대시메트릭 매핑기법을 활용하여 공간적으로 미시적인 수준에서 구축 분석하여 보다 정확한 접근도를 측정하였다. 최소거리 기반의 공공보건시설의 접근도 측정결과, 군지역과 읍면지역은 거주지로부터 각각 1,845m와 1,777m가 떨어져 있었다. 강원도와 경상북도에 입지하고 있는 지역들이 상대적으로 접근도가 낮았으며, 면지역의 접근도가 읍지역보다는 다소 우수한 것으로 나타났다. 본 연구의 결과는 농촌지역 공공보건시설의 잠재적 접근도의 현황과 지역 간의 격차를 구명하였다는 점에서 의의가 있다. 아울러, 향후 공공보건시설의 입지를 탐색하고 의료시설의 전달체계를 높이기 위한 기초자료로서 활용이 가능하다.

퍼소나 기반 시나리오 방법론을 적용한 주택에서의 노인 행위 시나리오 개발 (Developing Scenario for Elderly Residents' Behaviors at Home Using Persona-based Scenario Method)

  • 권오정;이용민;김동숙;이옥경;임지수
    • 한국주거학회논문집
    • /
    • 제28권3호
    • /
    • pp.65-74
    • /
    • 2017
  • An analysis of elderly behavior at home needs to be meticulously understood in order to build a spatial environment where the elderly can live safe and independent lives. To this end, the following study analyzed elderly behavior that occurs in the home, constructed personas, and developed persona-based scenarios of elderly behavior at home. Persona was composed of behavioral characteristics, spatial characteristics, and personal characteristics (gender, age, disease etc) that have a direct effect on living activities in the home, so it was intended to express a more real persona. The study developed six personas based on the behavioral and mobility characteristics of the elderly, and scenarios for each persona developed bsed on the following eight behaviors: toilet use, bating/Shower, washing and grooming, having meal, sleeping, dressing/undressing, laundering clothes, and getting out of home). Through this, the study determined the characteristics and difficulty level of various sub-behaviors and actions that occur in elderly behaviors at home. It also determined characteristics related to the use of physical elements such as equipment and furniture that are a part of those sub-behaviors. The behavior scenarios developed in this study can be utilized to understand the difficulties involved in elderly behavior, and to present a spatial plan and remodeling direction that alleviates such difficulties. This study is also significant that it investigates the applicability of persona-based scenario method on residential architecture.

The verification about possibility of introducing Window to Floor Ratio as design index for building energy performance

  • Choi, Won-Ki;Lee, Yong-Jun;Lee, Hyun-Soo;Eom, Jae-Yong;Lee, Chung-Kook
    • KIEAE Journal
    • /
    • 제17권1호
    • /
    • pp.23-28
    • /
    • 2017
  • Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

도시 내 십자형 교차로 경관의 개방성에 관한 연구 (A Study on the Openness of Landscape in Urban Cross Intersections)

  • 신유경;성현찬
    • 한국환경복원기술학회지
    • /
    • 제18권2호
    • /
    • pp.65-78
    • /
    • 2015
  • An important factor in assessing the beneficial qualities of a city's intersection spaces can be measured by examining a pedestrian's approach to the space and calculating the openness observed in the overall design of adjacent buildings. These spaces are influential, since they offer opportunities for pedestrians to spend time and take in views of the surrounding environment. The intersection of horizontal components in cities such as Bundang-si and Suwon-si can provide a sense of openness or greenness. We believe that there is a need for careful analysis and study of such components, as defined by designations in Bucheon-si research, and that this study can give important insights for future urban planning and design. When assessing the openness of an intersection, a key variable is the reported rate of perforation, which factors into the greenness of a space. Because of the large and varied scope of this research, this rate is highly variable, as there were many differences between each site. In descending order of average ratios: Seongnam-si, 41.79% > Bucheon-si, 35.40% > Suwon-si, 30.42%. The data compared for each city was divided into study sites selected at downtown locations as well as in urban outskirts. Openness and greenness were analyzed at each downtown and outskirt site. A summary of the results shows a decreased openness average of -2.63% in downtown locations versus outskirt. The greenness ratios in urban outskirt areas were 4.86% greater than downtown locations on average. As it relates to the results of this analysis of openness, the comprehensive property zoning for each city was determined as a ratio of residential to commercial designations. This study analyzes view points within urban cross intersections in the downtown landscape. It presents basic data and research directions to promote a better environment with regard to openness, and consists of an analysis of the relationship between a variety of physical components.

Experimental seismic behaviour of L-CFST column to H-beam connections

  • Zhang, Wang;Chen, Zhihua;Xiong, Qingqing;Zhou, Ting;Rong, Xian;Du, Yansheng
    • Steel and Composite Structures
    • /
    • 제26권6호
    • /
    • pp.793-808
    • /
    • 2018
  • In this study, the seismic performance of the connections between L-shaped columns composed of concrete-filled steel tubes (L-CFST columns) and H-beams used in high-rise steel frame structures was investigated. Seven full-scale specimens were tested under quasi-static cyclic loading. The variables studied in the tests included the joint type, the axial compression ratio, the presence of concrete, the width-to-thickness ratio and the internal extension length of the side plates. The hysteretic response, strength degradation, stiffness degradation, ductility, plastic rotation capacity, energy dissipation capacity and the strain distribution were evaluated at different load cycles. The test results indicated that both the corner and exterior joint specimens failed due to local buckling and crack within the beam flange adjacent to the end of the side plates. However, the failure modes of the interior joint specimens primarily included local buckling and crack at the end plates and curved corners of the beam flange. A design method was proposed for the flexural capacity of the end plate connection in the interior joint. Good agreement was observed between the theoretical and test results of both the yield and ultimate flexural capacity of the end plate connection.

장애인 주택개조 빈도 및 중요도 비교분석 -접근로 및 내부공간을 중심으로- (A Comparative Analysis on the Frequency and Importance of Home Renovation for the Disabled -Focused on Accessible Path and Internal Space -)

  • 이규일;안성준
    • 한국산학기술학회논문지
    • /
    • 제17권2호
    • /
    • pp.27-36
    • /
    • 2016
  • 일반적으로 보급되는 주택 내에서 장애인들은 불편하고 위험한 요소를 감수하며 살아가고 있는 것이 현실이다. 본 연구는 장애인 거주자의 생활방식에 따른 공간요소별 주택개조공사의 내용 및 빈도를 중심으로 문제점을 찾고 각 항목별로 전문가 설문조사를 통해 도출한 중요도와의 상관관계를 분석함으로써 공간별 장애물을 제시하여 주택개조에 필요한 기초자료를 제공함을 목적으로 한다. 이를 위해 지체장애인, 뇌병변장애인, 시각장애인을 대상으로 휠체어사용, 좌식생활, 단독보행, 클러치사용, 와상생활, 보조인동반보행 등 6개 생활방식으로 구분하여 주택 내 공간별 개조 공사의 빈도를 분석하였고, 공간적으로는 접근로, 현관, 복도, 거실, 침실의 5개 공간으로 한정하여 분석하였다. 분석 결과 공사빈도율과 중요도가 높게 나타난 항목은 거주자의 선호도 뿐만 아니라 전문가의 중요도도 높은 것이므로 해당 항목들을 중심으로 우선적으로 주택개조를 고려하여야 할 것이다.

원격 OSGi 서비스의 상호운용 기술 설계 및 구현 (Design and Implementation of the Interoperability method for the Remote OSGi services)

  • 김은회;윤기현;최재영
    • 인터넷정보학회논문지
    • /
    • 제12권1호
    • /
    • pp.11-25
    • /
    • 2011
  • 유비쿼터스 환경의 OSGi는 디지털 이동 전화, 차량, 텔레메틱스, 임베디드 가전, 가정용 게이트웨이, 산업용 컴퓨터, 데스크탑 컴퓨터, 고성능 서버에 이르기까지 그 적용범위가 확대되고 있다. 따라서 다양한 장비에 탑재된 OSGi 프레임워크의 서비스들을 상호운용할 수 있는 기술이 필요하게 되었다. 본 논문에서는 분산 OSGi 프레임워크에서 원격 서비스의 상호운용을 지원하기 위하여 대표적인 분산 미들웨어 기술인 RMI 패러다임을 적용한 원격 OSGi 서비스 상호운영 방안을 제안한다. 제안하는 원격 OSGi 서비스 상호운용 방안은 OSGi 표준 기술을 활용 및 확장하여 서비스 지향적인 OSGi 아키텍처에 부합하는 원격서비스의 등록 및 발견, 접근 방법을 제공하며, 동적으로 변하는 원격 서비스들의 속성을 일관성 있게 유지하여 원격서비스에 대한 신뢰성을 지원한다. 또한 동적으로 프락시 번들 및 프락시 서비스를 생성함으로써 원격 OSGi 서비스의 위치 투명성을 지원하는 특징을 가진다.

밀양(密陽) 경덕단(景德壇)과 만운재(萬雲齋)의 건축적 특성 - 근대한옥의 성격을 중심으로 - (A study on the Architectural Characteristics of Kyungduk-Dan and Manun-Jae in Miryang -Mainly about the Characterics of Traditional Houses in modern era(1876-1945)-)

  • 이호열
    • 건축역사연구
    • /
    • 제10권1호
    • /
    • pp.9-23
    • /
    • 2001
  • This study is for the Kyungduk-Dan(as a altar of Milsung-Daegun) and The Manun-Jae the characteristics(lay out and planning, window patterns, structure, materials) of the the Korean traditional house during the modern era. Before Manun-Jae was used for the house. The Kyungduck-Dan was constructed in August according to the Lunar Calender in 1927. The Manun-Jae(house for Ki-hun Kang, millionaire ) was completed in 1924. Modern Architectures brought to Korea with the bricks, the tiles, the flash doors, the plate grasses, the brass hardwares. These architectural material was used in positive. During the construction of Manun-Jae in 1924, it happened the architectural exchage among a korean, a chinese and a japanese constructor. Though using the air exhaust valve at the kitchen of Ukyung-Kak( old Anchae), it could be assume that the modern convenience and the improvement of residential environments was considered at that period during the construction of Manun-Jae. That construction was elected with the brick($222mm{\times}106mm{\times}50mm$), the chinese colored tile and plate glass such a modem materials. The new shape of the korean lattice window and the wooden flash-door with glass was used. In Ukyung-Kak, the Chan-Maru(service space) and the kitchen such as a service space or concise utility zone was organically connected. Especially, considered the domesitic activity and circulation, the western kitchen sink and the Chan-Maru(service space) was rationally placed. At the Manun-Jae and the Kyungduck-Dan, the architectural characteristic is that the new shape of windows was used. The lattice window at the Ondol room of Ukyung-Kak, was rgadually added the plate glass and the wood plate. The lattice window with the grid shape at kitchen of that building was adapted japanese grid lattice window in korea at that period. It is the sample that korean traditional house was typically influenced from the japanese resident culture. The Manun-Jae and the Kyungduck-Dan as the modern house kept the form of korean traditional architecture, and was partially adapted a modern characteristic space and modern architectural materials. During the japanese occupancy, these residence can be showed the transition in formally.

  • PDF

신축공동주택의 기밀성능 실측에 관한 연구 (The Field Measurement of Airtightness in the Apartment Buildings)

  • 박원석;윤재옥
    • KIEAE Journal
    • /
    • 제3권3호
    • /
    • pp.43-50
    • /
    • 2003
  • Nowdays the apartment is a main type of modernized residential buildings. According to the improvement of construction techniques and functions of windows and doors, recent apartments are enhanced air tightness of windows, doors and building envelopes. As Infiltration is decreased and natural ventilation is reduced, energy could be saved in winter. However, indoor air quality is bad. The air Infiltration of a building could be enlarged by physical actions, such as building designs, constructions and reduction of air tightness which is caused by aging. This research analyzes and measures with KNS-4000P (Sapporo air tightness measurement) the air tightness of the high rise apartments which is recently constructed and not occupied yet. With depressurization method, the KNS-4000 installed on the window and the indoor air-leakage was measured. At that time, Air come out from the edge of the windows and doors because of the pressure differences between indoor and outdoor. We measure the amount of the air as effective air leakage areas. This method of depressurization takes less time to measure than other methods and is less affected from other conditions. We measured infiltration of total 56 household, 29 households S apartment (total floor area : $64.42m^2$) in Balan and 29 households D apartment(total floor area : $78.21m^2$) in Chonan. As a result of the field measurements at October 2003, normalized leakage area of D apartment in Cheonan was $2.05cm^2/m^2{\sim}3.49cm^2/m^2$ (average: $2.77cm^2/m^2$) and normalized leakage area of S apartment in Balan is $1.23cm^2/m^2{\sim}1.68cm^2/m^2$ (average: $1.5cm^2/m^2$).