• KIEAE Journal
• /
• 제16권6호
• /
• pp.123-128
• /
• 2016

Purpose: In order to save the energy consumption of buildings, buildings have been constructed with high performance insulation or airtightness. However, high performance insulation or air tightness has led to a poor indoor air quality. Therefore, HRV(Heat Recovery Ventilator) has received attention to save the energy consumption and insure a good air quality. Because existing research is almost about the performance of HRV in residential buildings, This study analyzed the effect of HRV on cooling energy consumption in commercial office building. Method: This study was proceeded at commercial office building in In-cheon. In order to evaluate the energy consumption of HRV, this study proposed two methods: estimating energy consumption of the room installed AHU(Air Handling Unit) system; estimating energy consumption of the room installed HRV system. Therefore, comparison of two methods was proceeded to evaluate energy performance of each method. Result: As the result of comparison between rooms installed AHU and HRV, the experiment showed that energy consumption of the room installed HRV system is about 22% less than the room of AHU system. This conclusion is considered because the room installed HRV system have maintained temperature well at set point temperature $26^{\circ}C$.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.91-96
• /
• 2009

First, the base model of multi-family residential buildings are selected, and then the $CO_2$ reduction building technologies that are applicable for multi-family residential buildings are induced by analyzing the examples and then an optimal plan for when the $CO_2$ reduction building technologies can be integrated and applied to the base model was formulated. In the results of converting the energy consumption and reduction amount from the building technologies into $CO_2$ emissions to analyze the distribution ratio compared to the entire $CO_2$ emissions; the heat recovery ventilator is 0.5%, the photovoltaic system is $1.9%{\sim}5.9%$, the solar hot water heating system is $6.3%{\sim}13.1%$ and the ge thermal heat-pump system is 39.0% when both heating and hot water heating are applied. An optimally integrated application method for the building technologies is in charge of heating and hot water heating through the geothermal source heat pump system and in charge of the electricity load through the photovoltaic system(45.2%).

• 한국실내디자인학회논문집
• /
• 제17권3호
• /
• pp.23-33
• /
• 2008

After the concept of apartments was introduced in 1960s in Korea, on account of the development of architectural technology and science, high-rise residences in Korea are getting higher, and these residences have been becoming high-rise commercial/residential buildings since 1990. Nowadays, as the construction of high-rise commercial residential building complex is booming, the difference between these complex and high-rise apartments is getting smaller, and these two kind of high-rise residences are becoming new residential style in Korea. And these high-rise residences are considered the symbol of wealth owing to the marketing strategy emphasizing high quality, refined interior, a fair view, and the protection of privacy. However, high-rise residences bring about many problems related to health and psychology caused by the consumption of a large amount of energy, pollutant emission, the deterioration of the quality of indoor air, and vibration. For this reason, in this study, we tried to emphasize the necessity of environment-friendly access to provide healthy living environment and to reduce the negative effect of housing life in high-rise residences, and find the method to improve environment-friendly quality and health of residents in interior space. Therefore, this study aims to detect the problems and the items to be improved of interior spaces of high-rise residences by quantitative, qualitative analysis of the evaluation elements and the floor planning elements deduced from environment-friendly architectural certification in Korea and the other countries, and suggest the guideline to improve the environment-friendly quality of these interior spaces.

• 토지주택연구
• /
• 제14권1호
• /
• pp.47-66
• /
• 2023

본 연구에서는 MZ세대의 주거환경특성, 주거만족도, 주거소유의식 및 주거이동에 대한 이론적 고찰과 선행연구를 검토하고, 2020년 한국주거실태조사 자료를 중심으로 AMOS를 이용하여 구조방정식 모형을 분석한다. 주거환경특성 14개 항목을 3가지 요인으로 분석하여 주거만족도, 주거소유의식, 주거이동에 미치는 영향을 분석하였다. 본 연구의 실증분석 결과는 다음과 같이 요약된다. 첫째, MZ세대의 주거환경에서 14개 항목을 대상으로 주성분분석의 Varimax로 요인분석을 수행하였다. 14개 항목 중 주차시설 항목은 유효성을 저해하여 분석대상에서 제외되었으며, 그 결과 KMO는 0.925, Bartlett의 검사결과는 0.01 미만의 유의한 확률을 보여 요인분석 모형이 적합한 것으로 나타났다. 둘째, MZ세대의 구조방정식 분석 결과를 보면 주거환경특성의 잠재변수인 주변환경성은 통계적으로 유의하게 나타났으나 접근용이성, 이용편의성은 통계적으로 유의하지 않게 나타났다. 셋째, MZ세대와 같은 젊은 세대일수록 소비에 대한 욕구가 강하기 때문에 상업시설 접근용이성에 대한 만족도가 높을수록 주거보유의식은 유의하게 나타난 것으로 보인다. 넷째, MZ세대의 전반적인 주거만족도는 주거이동에는 유의하게 나타났지만 주거보유의식에는 유의하지 않게 나타났다. 이러한 결과에 따르면 MZ세대는 산업화세대, 베이비붐세대, X세대와 다른 주거환경특성의 차이가 나타나고 있고, 그 요인은 주거만족도와 주거보유의식 및 주거이동에 영향을 미치는 것으로 확인되었다. 주거실태조사의 주거환경특성 항목들을 시대의 흐름에 맞게 개선하고 보완해야 하고, 정부와 지방자치단체는 주거양극화를 줄이기 위하여 세대의 환경과 특성에 맞는 주택시장에 적극적으로 참여할 수 있도록 지원이 우선시 되어야 한다. 그리고 앞으로 코로나19와 같은 특수한 시간적 상황에서는 어떻게 영향을 미치며 차이가 나타나는지 주거관련 연구의 필요성이 있다는 시사점을 제공한다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 춘계학술논문발표회 논문집
• /
• pp.123-127
• /
• 2007

• Journal of Power Electronics
• /
• 제12권1호
• /
• pp.215-222
• /
• 2012

Lighting represents a significant component of commercial buildings, particularly office buildings. Fluorescent lighting is invariably used in all commercial, industrial and residential areas. A significant amount of lighting energy is wasted every day by leaving the lights on and not utilizing daylight energy. However, if daylight illuminance can be harnessed, this will reduce the electricity consumption of fluorescent lamps and save energy. This paper explains possible significant savings in lighting energy consumption and hence in costs, without reducing the performance and visual satisfaction in office or industrial buildings. It is proposed to obtain energy saving by reducing the supply voltage without degradation in lighting performance. Experimental results confirm that as much as 20% of electrical energy can be saved by reducing about 9% of the supply voltage, without noticeably affecting light output while complying with lighting standard limits.

• 설비공학논문집
• /
• 제17권1호
• /
• pp.88-93
• /
• 2005

In this study, the operational characteristics on heating performance and energy consumption for intermittent hot water heating system in apartment buildings were research by simulation. The effects of apartment inlet hot water temperature and operation time per day on energy consumption and indoor thermal environment are investigated. The strategy of energy saving and thermal environment improvement is suggested in comparison with the existing ones.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.13-19
• /
• 2018

The Effects of hot water supply temperature on indoor thermal characteristics for floor radiant heating system in residential apartment were researched by computer simulation. The parametric study on hot water supply temperatures with different outdoor air temperatures was done with regard to energy performance and control characteristics, respectively. As a result, the maximum overshoot of indoor air temperature and energy consumption were reduced by adjusting the hot water supply temperatures with outdoor air temperatures.

• 한국지열·수열에너지학회논문집
• /
• 제16권4호
• /
• pp.16-23
• /
• 2020

In this study, the control characteristics and effects of control methods on heating performance and energy consumption for the hot water floor radiant heating control system of a residential apartment were research by experiment. As a control method, On-Off control and outdoor reset control methods with GRNN(General Regression Neural Network) and without GRNN are considered. Also, the control performances with regard to improvement of indoor thermal environment and reduction of energy consumption are compared, respectively. Experiment results show that the performance of the control method with GRNN is better than that of conventional on-off control method without GRNN in the responses of room set temperature and energy saving.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.723-727
• /
• 2015

Building energy use estimation relies on building characteristics, its energy systems, occupants, and weather. Energy estimation of new buildings is considerably an easy task when compared to modeling existing buildings as they require calibration with actual data. Particularly, when energy estimation of existing building stock is warranted at a city-scale, the problem is exacerbated owing to lack of construction drawings and other engineering specifications. However, as collection of buildings and other infrastructure constitute cities, such predictions are a necessary component of developing and maintaining sustainable cities. This paper uses Artificial Neural Network techniques to predict electricity consumption for residential buildings situated in the City of Gainesville, Florida. With the use of 32,813 samples of data vectors that comprise of building floor area, built year, number of stories, and range of monthly energy consumption, this paper extends the prediction to environmental impact assessment of electricity usage at the urban-scale. Among others, one of the applications of the proposed model discussed in this paper is the study of urban scale Life Cycle Assessment, and other decisions related to creating sustainable cities.