• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.815-825
• /
• 2017

Visibility of lane marking is impaired at night or in the rain, which thereby threatens traffic safety. Recently, various studies and technologies have been developed to improve lane marking visibility, such as the extension of lane marking life expectancy (up to 1.5 times), improvement of lane marking equipment productivity, improvement of lane marking visibility by applying phosphorescent material mixed paint. Cost-benefit analysis was performed with considering various benefit items that can be expected. About 45% of traffic accidents would be prevented by improving lane marking visibility. Additionally, accident reduction benefit and traffic congestion reduction benefit were calculated as much as 246 billion KRW per year and 12 billion KRW per year, respectively, by reducing repaint cycle due to enhanced durability. 45 billion KRW per year is expected to reduced with improved lane detection performance of autonomous vehicle. Meanwhile, total increased cost when introducing phosphorescent material mixed paint to 91,195km of nationwide road is identified as 1922 billion KRW per year. However, economic feasibility could not be secured with 0.16 of cost-benefit ratio when applied to the road network as a whole. In case of "Accident Hot Spot" analyzing section window (400m), one or more fatality or two or more injured (one or more injured in case of less than 2 lanes per direction) per year were caused by pavement marking related accident, economic feasibility was secured. In detail, 3.91 of cost-benefit ratio is estimated with comparison of the installation cost for 5,697 of accident hot spot and accident reduction benefit. Some limitations and future research agenda have also been discussed.

• Journal of Fashion Business
• /
• v.6 no.1
• /
• pp.137-154
• /
• 2002

It's not easy to renew old brand of over 50 years history to the tastes of new consumer of our time. Most of national brands that has a history of some 20 years in Korea have strove for continuation and growth of brand to no avails, which can be taken as a good example of current situation. For instance, C company, one of the National brand of US which has a history of 51 years, has made its position secure as a fashion group and based itself on a sound foundation by establishing new marketing strategy and completing successful brand renewal in the process of strategic M&A with Italian company. Those successful marketing strategies are as follows. 1) they regarded both market and consumer oriented marketing activity as company's highest priority strategy and put great emphasis upon concentration on target market and reestablishment of brand image of business casual wear. 2) Setting up and operating planning team composed of merchandizer alone in Milano, they set the direction of plan on the basis of concentrated research on potential item in market according to thorough market research done by buying office in Korea, branch office in Hong Kong and buyer in US prior to blueprint planning for season. 3) Great emphasis was placed on business which focused on intensive presentation of basic key item for apparel career women who are main consumer group in the midium-low prices market in US and on supplementation of size and color. they named this line 'collectibles' and helped their customer develop their own clothes plan without worrying about the change of color and fabric by supporting same fabric and color throughout the year and enabled them to add variation easily by supplementing new trend item. 4) Company set black as a main color that lots of apparel career women find easy to care and to express their own image and presented them with pebble which belongs to navy and beige and added fashion color such as wine and brown etc as season goes by. They constructed basic line in order for their customers to coordinate purchased item with new one or to add them to present collection, and to achieve efficient sale by setting up strategy which allows this cross coordination and changing pattern occasionally. 5) Though basic jacket for 99$, short slim skirt for 49$ are products within midium-low prices range, in the material planning stage aiming at production of item that has both resonable function appealing to consumer and is fashionable, synthetic material had to be used as a main source due to price competitiveness. Despite this situation, considering comfortable sense of fit and refined drape of silhouette that has no sign of cheap material, whole collectible line was divided into two items, which contributed to reduction of cost. In case of material that is composed of triacetate and polyester in 70 to 30 ratio, was used up to 4 million yard, which allowed drastic curtailment of cost accompanied by concentration. In case of 'collectibles' line, using Korean material mainly, C company chose to have their product sewed in Southeast Asian countries where transportation is well developed and both productivity and quality verified by operating global production system which aiming at cutdown of cost through outsourcing production from the country where labor cost is low and getting finished product. Polarization between present consumers telling us that consumers with the mind of middle classes in the past no longer exists between consumers who seek after only fine article of highest quality and wise consumers who are sensible enough to judge bubble on correlation between price and quality. To cope with this change in new consumer mind, apparel makes changing their policy so as to produce item that has reasonable quality and falls within affordable price range anywhere in the world. and they're striving to get out of difficult situation by operating global marketing strategy which stresses separation of planning, production and sale and sensibility of fashion shared worldwide. The marketing strategy of C company can be exemplified as a successful one.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.29 no.2
• /
• pp.111-120
• /
• 2009

There are barley, wheat, oat, rye and triticale winter cereal crops for whole crop silage. These small grains have been suitable to use for round-baled silage making as livestock feed. Studies were carried out to understand the growth and productivity of five winter cereals grown at paddy field in middle region of South Korea. The ratio of culm weight per plant were described by quadratic function for 5 winter cereals crops. The peak of culm ratio were 1 May in barley variety 'Youngyang', 5 May in wheat variety Keumkang', 10 May in rye 'Gogu'(Rye), 11 May in triticale variety 'Shinyoung' and 13 June in oat variety 'Samhan', respectively. The ratio of leaf per plant were linearly decreased by growing. In barley and oat, the ratio of spike weight per plant were linearly increased after heading, but in wheat and triticale, it were not accumulated at one time after heading and rapidly increased after fertilization. The ratio of spike weight per plant in barley was outstandingly higher than that of wheat, triticale, rye and oat, respectively. So, barley variety 'Youngyang' recommended for whole crop forage use was suitable for forage use because of high at ratio of the leaf and spike. The proper cutting date by the percentage of dry matter for baled-silage making, 30$[\sim}$40%, were 25 May in barley variety 'Youngyang', 25 May to 5 June in wheat variety 'Keumkang' and triticale variety 'Shinyoung', 15 May in rye 'Gogu' and 5 June in oat variety 'Samhan', respectively. The total aerial fresh weight accumulation at different cutting dates were described by quadratic function for barley, wheat and triticale. The forage fresh yield were peaked at 7 May in barley, 14 May in wheat, 17 May in triticale and late of May in oat, respectively. The dry matter yields of four small cereals were linearly increased after over-wintering. The yield at the date of proper harvesting time by water content for baled silage making were sequently high oat, barley, wheat, triticale and rye. The relative growth rate was relatively high in rye at early cutting but high in oat at late cutting. In barley, wheat and triticale, the rate were similar.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.3
• /
• pp.183-192
• /
• 1982

The variability of rice productivity during last 2 decades (1961-1980) of ten years before and after the introduction of"Tongil" was reviewed from the epochal, regional and varietal points of view. During that period the cultivated area of paddy rice have remained almost unchanged, while the total rice production have got elevated from 3, 463 million metric tons in 1961 to 6.006 million metric tons in 1977, recording 73.4% increase. This remarkable increase in rice production is considered to be attributable much to the development and release of new high yielding variety, "Tongil", coupled with the amelioration of cultural techniques. However, in 1978 Tongil type varieties experienced the epidemic outbreak of blast disease due to the shifted race population of blast fungus and in 1980 recorded poor rice production as low as in 1960's due to the unfavorable weather stress throughout the rice growing season, giving rise to many problems awaiting solutions for securing the stabilized high production of rice. The rice yield has continued the gradual increase during last two decades but its difference between farmer and research organization have got wider from 79kg/10a during 1960 to 1971 to 101kg/l0a during 1972 to 1980, and also the inter-regional differences have been increased from 50-60kg/10a to 80kg/10a during those periods. Therefore, this proves that we have raised the upper boundary of rice yield by increasing the yield potential of rice variety but have not changed those absolute deviations. Estimates indicate that the increased rice production during that period was indebted 40 percent to the varietal improvement and 13 percent to the ameliorated agro-technologies, and the rest, 47 percent, could be ascribed to the other factors besides varieties and cultural technologies such as the improved agricultural environments, etc. Of course, even though it cannot be expected to unify the cultural environments and the cultural technologies, provided that much efforts are to be endeavored to minimize the yield difference of 20 percent between farmer and research organizations and the inter-regional yield difference of 20 percent, much increased rice production can be expected to be achieved with the current level of cultural technology and the yielding potential of the present rice varieties. In order to expedite the above effects on rice production the followings are to be put into practices consitently and steadfastly. 1. Reinforcement of breeding for varieties with high yielding potential and less susceptible to climatic-stress and pests, and of basic physicoecological studies of rice plant for improving the cultural technologies. 2. Continuous endeavor to secure the stabilized cultural environments by improving the soil fertility and increasing the drainage and irrigation facilities. 3. Political back-up to encourage the farmers' incentives for production 4. Precise surveys for agricultural statistics to facilitate the long-term planninge long-term planning.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.1
• /
• pp.21-25
• /
• 2014

Singwangok, a new single cross variety, was developed by the maize breeding team at the National Institute of Crop Science (NICS), RDA in 2012. This hybrid, consisting of a high yield of grain, was produced by crossing two inbred lines, KS172 and KS173. KS172 is the seed parent and KS173 is the pollen parent of Singwangok. It is a yellow-orange intermediate maize hybrid (Zea mays L.). After the preliminary yield trial and advanced yield trial of Singwangok (Suwon185) in Suwon for 2 years, the regional yield trial of that was subsequently carried out for its growth characteristics and yield at 3 different locations from 2010 to 2012. It was named as Singwangok. The silking date of Singwangok is similar to the check hybrid, Jangdaok. The plant height of Singwangok is similar to Jangdaok, but its ear height ratio is lower than that of Jangdaok. Moreover, it has a resistance to lodging. The ear number per 100 plants of Singwangok is more 17 than that of Jangdaok, whereas the ear length of Singwangok is similar to Jangdaok. Further, the weight of 100 seeds of Singwangok is similar to Jangdaok. It has a moderate resistance to southern leaf blight (Bipolaris maydis) and a strong resistance to northern leaf blight (Exserohilum turcicum). Furthermore, it has a moderate resistance to the black streaked dwarf virus (BSDV), ear lot and corn borer. The grain yield of Singwangok, 7.81 ton/ha, was similar to that of Jangdaok. The seed production of Singwangok was well processed due to the good match during crossing between the seed parent, KS172 and the pollen parent, KS173, in Yeongwol; the F1 seed yield was 3.84ton/ha. Singwangok would be a suitable cultivar to all plain areas in Korea.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.549-556
• /
• 2017

Rivers continuously transport terrestrial organic carbon matter to the estuary and the ocean, and they play a critical role in productivity and biodiversity in the marine ecosystem as well as the global carbon cycle. The amount of terrestrial organic carbon transporting from the rivers to ocean is an essential piece of information, not only for the marine ecosystem management but also the carbon budget within catchment. However, this phenomenon is still not well understood. Most large rivers in Korea have a well-established national monitoring system of the river flow and the TOC (Total Organic Carbon) concentration from the mountain to the river mouth, which are fundamental for estimating the amount of the TOC flux. We estimated the flux of the total terrestrial organic carbon of five large rivers which flow out to the Yellow Sea, using the data of the national monitoring system (the monthly mean TOC concentration and the monthly runoff of river flow). We quantified the annual TOC flux of the five rivers, showing their results in the following order: the Han River ($18.0{\times}10^9gC\;yr^{-1}$)>>Geum River ($5.9{\times}10^9gC\;yr^{-1}$)>Yeongsan River ($2.6{\times}10^9gC\;yr^{-1}$)>Sumjin River ($2.0{\times}10^9gC\;yr^{-1}$)>>Tamjin River ($0.2{\times}10^9gC\;yr^{-1}$). The amount of the Han River, which is the highest in the Korean rivers, corresponds to be 4% of the annual total TOC flux of in the Yellow River, and moreover, to be 0.6% of Yangtze River.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.

• International Area Studies Review
• /
• v.21 no.1
• /
• pp.97-117
• /
• 2017

This research highlights the process of adopting cloud computing technology from users' perspective. Concentrating on perceived mechanism from employees side that lead to job performance at work. Cloud computing, the new player in our modern business environment, authors employ diffusion of innovation theory to capture how this new technology affect employees in workplace in terms of job performance. Education for this new system and managerial support by firm were used as moderating variable to test dependent variable, job performance. Research was done through survey from total 284 people working in metropolitan area at South Korea. The result shows that cloud computing system affect positively on work efficiency, and the extent of diffusion factors that influence from the most to least are as follow: 1. Users' Skill, 2. System Quality, 3. Information Quality, 4. Group Awareness, 5. Attitude towards New System. To test diffusion factors of cloud computing and job performance, South Korean people actually felt that cloud computing help their job performance and the extent of diffusion factors that influence from the most to least are as follow: 1. Users' Skill, 2. System Quality, 3. Information Quality, 4. Attitude towards New System, 5. Group Awareness. As for diffusion factors of cloud computing and productivity, result proved that cloud computing really helps firms, and the extent of diffusion factors that influence from the most to least are as follow: 1. Information Quality, 2. Attitude towards New System, 3. Group Awareness, 4. System Quality, 5. Users' Skill. Two moderating variables, employee education and managerial support were tested to prove whether these two variables affect the job performance and the result displays positive affect for both two factors. To conclude, adopting cloud computing helps firms by increase employees' work efficiency and job performance. In order to accelerate the process employees education really matters because users' skill is the most crucial among diffusion factors.

• Journal of Food Hygiene and Safety
• /
• v.36 no.1
• /
• pp.68-76
• /
• 2021

Foodborne outbreaks frequently occur worldwide and result in huge economic losses. It is the therefore important to estimate the costs associated with foodborne diseases to minimize the economic damage. At the same time, it is difficult to accurately estimate the economic loss from foodborne disease due to a wide variety of cost components. In Korea, there are a limited number of analytical studies attempting to estimate such costs. In this study we investigated the components of economic cost used in foreign countries to better estimate the cost of foodborne disease in Korea. Seven recent studies investigated the cost components used to estimate the cost of foodborne disease in humans. This study categorized the economic loss into four types of cost: direct costs, indirect costs, food business costs, and government administration costs. The healthcare costs most often included were medical (outpatient) and hospital costs (inpatient). However, these cost components should be selected according to the systems and budgets of medical services by country. For non-healthcare costs, several other studies considered transportation costs to the hospital as an exception to the cost of inpatient care. So, further discussion is needed on whether to consider inpatient care costs. Among the indirect costs, premature mortality, lost productivity, lost leisure time, and lost quality of life/pain, grief and suffering costs were considered, but the opportunity costs for hospital visits were not considered in any of the above studies. As with healthcare costs, government administration costs should also be considered appropriate cost components due to the difference in government budget systems, for example. Our findings will provide fundamental information for economic analysis associated with foodborne diseases to improve food safety policy in Korea.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.