• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.555-568
• /
• 2014

The construction equipment is one of the major sources for hazardous air pollutants in Korea, and the its management has been of great concern recently. The objective of this study was to estimate each contribution of emission of construction equipments according to their production year, electric power consumption and type. To achieve this goal, we developed pollutant emission factors for the machineries manufactured after 2009, which are excluded from the present framework of Korean air pollutants inventory, CAPSS. More than 800 data obtained from emission investigations were utilized for the estimation. Compared with the previous estimation, the scheme used this study was modified to incorporate new emission factors as well as to include the corresponding activity data. Such improvement allow us to gain more detailed emission informations which are better characterized by specifications of construction equipments. The total amount of pollutants emitted from construction equipments in 2011 were estimated as 126.8, 7.0, 58.3, and 17.0 kton for $NO_x$, PM, CO, and VOC, respectively. The estimation results indicate that the increase in the emission of equipments is significantly related to their age and power consumption. The emissions of the older ones manufactured from 1992~1996 were estimated to be the contribution ranged from 23.7% to 26.8%, whereas the newer ones (2009~2011) showed the attributions of 11.3~21.5%. In addition, the results show that the emission of each equipment was increased with the increase in the electric power consumption of engine, probably due to their average output power. Among the nine types of machinery compared, excavators and forklifts were investigated to contribute relatively higher emissions in the level of 39.8~44.0% and 32.0~34.2%, respectively.

• 설비공학논문집
• /
• 제20권8호
• /
• pp.556-562
• /
• 2008

The building HVAC systems have very different qualities of performance and durability with the superintendent's ability for management and maintenance. The poor management of these systems finally lead to the shortening of the life expectancy and result in the increase of operating costs and energy consumptions due to low efficiencies. This study presents an example of appropriate use of the LCC(Life Cycle Cost) analysis in a process of maintaining and repairing old HVAC equipments, by demonstrating the difference of optimal economic life, decrease of running cost, and energy consumption according to the management level of the HVAC equipments. But there are no reliable life expectancy and performance history data at present for optimal management of various building service equipments. Therefore, it is necessary to construct long-term database on operation results of them for more accurate and optimized LCC analysis.

• 대한방사선기술학회지:방사선기술과학
• /
• 제7권1호
• /
• pp.47-52
• /
• 1984

This paper was performed research for the total filtration in the useful beam of 45 diagnostic x-ray equipments using in Korea. We obtained the following results: 1. A good ability of total filtration was showed in higher than lower maximum permissible rating equipments. 2. In 53 percentage of 45 diagnostic x-ray equipments, the total filtration in the useful x-ray beam was not less than the values given in the Korean industrial standard. This results suggested to user to need the more ability management of diagnostic x-ray equipments using now.

• 한국군사과학기술학회지
• /
• 제23권2호
• /
• pp.168-175
• /
• 2020

Failure of essential avionic equipments have a significant impact on the operations and safety of P-3 maritime patrol aircraft. Therefore, avionic equipments of P-3 are required to have higher reliability. Based on the field failure data, this paper studies the reliability growth of essential avionic equipments in P-3 using Duane model. Additionally, a simulation model is built and implemented for identifying the operational availability according to the field failure data of avionic equipments.

• 터널과지하공간
• /
• 제5권1호
• /
• pp.48-56
• /
• 1995

Recently, most of the underground excavation works are adopting heavy duty mobile diesel equipments which have outstanding merits in view of efficiency. However, these equipments are causing hygienic problems to the workers due to the various hazardous exhaust contaminants. Considering that there are always dead end workings in underground excavation sites, it is very important how to supply enough airflow to the workings to dilute diesel exhaust contaminants. This paper introduced the theoritical mechanism and actual trends of exhaust contaminants of diesel equipments under operation at local mines and suggested the design method of intake air volume in underground excavation workings using diesel equipments.

• 한국군사과학기술학회지
• /
• 제19권1호
• /
• pp.43-49
• /
• 2016

This paper addresses the problem of the software update or upgrade of embedded equipments on a missile assembly with booster. Because the embedded equipments are assembled delicately and closely one another with various communication and power cables, they should be very carefully disassembled to directly upgrade the software of a certain embedded equipment. This may cause not only the costs for disassembly and reassembly but also additional tests to verify the completeness of the reassembled missile as a missile assembly with booster. This paper presents an indirect data transfer technique based on MIL-STD-1553B through Guidance Control Unit to easily upgrade the software of other equipments without any additional costs caused by disassembly and reassembly. The presented technique was successfully applied to the software upgrade of various equipments on real missile assembly with booster.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.24-26
• /
• 1994

This paper describes a numerical model for the short-term operation strategy of the cogeneration systems. Especially this paper considered various auxiliary equipments used for the effective operation of cogeneration system. Minimum daily operation costs of topping cycle are calculated by using LP. Simulation results of some cases are analyzed and compared each other. Through these simulations the validity of the proposed model considered various auxiliary equipments is verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1145-1146
• /
• 2008

Failures of equipments are linked directly to extensive damages of human lives or financial losses from the increasing uses of railway signaling equipments utilizing computers. Then safety organizations have to establish for guaranteeing safety during the system life-cycle. In this paper, we examine the relationship between railway signaling standards and other safety standards for safety meaning establishment.

• 교육녹색환경연구
• /
• 제11권2호
• /
• pp.51-60
• /
• 2012

This research aims to take a close look at the following topics; the ground elevation of playground, equipments of playground, and equipments around playground, and to propose the improvement measure for favorable educational environment. In consideration of the needs mentioned, the following improvement measure for playground can be suggested. First, the elevation of playground should be changed. According to Environment psychology, current playground elevation should be lowered 2 stair-long height from a classroom site. This kind of elevation change can remove unnecessary stairs, and reduces inconvenience incurred by stairs and edges, which results in considerable educational finance saving. Second, the incidental equipment within a playground needs to be improved. This fact is found out at the surveyed schools; school gathering is held at classrooms (through broadcasting) or a multi-purpose auditorium in place of a playground. The results of this study make us conclude that the most important issue to be considered in the processes of selection and investigation for school playground elevation, incidental equipments and others.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.174-179
• /
• 2009

The purpose of this study is to research the actual condition of working environment, working clothes and personal protective equipments on workers at a construction site in winter. The one to one interview by questionnaire was performed with 33 males and 2 females workers of a construction site in Daegu at $1.3^{\circ}C$ air temperature, 28% R.H., 4.7m/sec air velocity. The questionnaire consisted of 21 questions including 4 personal characteristics questions, 12 working environment/performance questions and 5 working clothes/personal protective equipments questions. It was modified from the original questionnaire developed by Finnish Institute Occupational Health. We found that physical stress of workers increased and the ability of performance decreased. The workers felt the coldest at hands/fingers, feet/toes and the face part of cheek, nose and ears. They rarely wore thermal clothing for winter and answered that the thermal gloves for winter did not provided enough warmth. Even if the workers recognized the necessity of personal protective equipments for their safety, they did not wear them for efficiency of working performance. These results will be useful elementary materials for development of working clothes and personal protective equipments from the viewpoint of improving both working performance and comfort.