• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.5
• /
• pp.556-560
• /
• 2001

Remote field eddy current testing (RFECT) with through-wall transmission characteristic is being applied to pipes ranging from small tubes of heat exchanger to natural gas supply pipelines. Cast iron pipes with nominal diameter of 100mm are used primarily as the waterline pipes. The leakage of water occurs due to defects in the pipes caused by vibration of automobiles and corrosion. But, the use of direct inspection methods such as insertion of inspection equipment inside the pipelines has been limited due to its lack of economical efficiency. Economical development of inspection equipments is possible since RFECT method can be easily employed for system integration and quantitative evaluation of both inside and outside defects. In this study, the development of underground pipeline inspection system was tarried out by using RFECT method in consideration of the characteristics of waterline network. This paper specifically describes the design and production of RFECT pipeline inspection pig using centralizer mechanism, development of remote field eddy current signal acquisition and processing software, and review of RFECT system operation procedures.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.512-520
• /
• 2011

This study was preformed to investigate the characteristics of the green drying system for utilizing heat wasted during carbonization process. The green drying system utilizing waste heat is one of environment-friendly equipments because it needs no other energies from fossil fuel and etc. In this study, waste heat from three kilns was collected by stainless connection pipe, and in the green drying system the temperature and humidity was hardly changed. Charcoal charecteristics as fixed carbon, refining degree, hardness, pH, calorific value, and charcoal yield were analyzed to investigate kiln performance due to installation of green drying system. As a result, the green dry system installation hardly affected the characteristics of charcoal. In conclusion, the green drying system can be applied to maximize the profit of the farm household income and contribute to reduce fossil energy.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.9-18
• /
• 2008

Recently according to the development of an information society the information technology equipments which a clock frequency has the facility over a number giga hertz have been developed much. And we have research which leakage electromagnetic signals can use at the communication security and tapping. In this paper, we restored leakage electromagnetic signals of the monitors. And we proposed efficient recovery technique to restore the screen of the monitor. First of all, we understand a screen characteristic of the monitor. And then we restored a monitor screen from leakage electromagnetic signals from the monitor. For also we tried to use a Wavelet transform and filters to remove the noise for better performance. In the result of the experiment, we used leakage electromagnetic signals and confirmed the possibility of a monitor screen of the recovery. And we improve the performance with Wavelet transform and filters.

• Journal of Korean Home Economics Education Association
• /
• v.4 no.1
• /
• pp.43-55
• /
• 1992

The purpose of this reasearch is to supply the basic data to improve Home Economics curriculum. This research was intended for 190 home economics teachers who are teaching in Kwang-Ju and chun-nam. The results are summarized as follows； 1. Among the objects of Home economics, the most important objects were to make students understand the significance of family life and development of family numbers. It requires 4 or 5 hours a week to learn these objects. 2. The amount of curriculum was immense and the level of curriculum was higher than students’level. More intencifying field are in this order； sex education, propriety education, consumption life, occupation, and computer education. 3. In home economics curriculum, the main stress was laid upon the application of action and learning content was focused on the matter set in the examination. 4. Theory and practical training classes were usually in the ratio of 7：3 and 8：2 in the current school classes. Ideal training classes are in the ration of 4：6, 5：5, 6：4, which showed that much weight was given to the practical exercises. 5. In practing subject matter, students tended to practice only main subject matter. The reason was primarily due to the lacks of equipments and faccilities, the limitation of training time for enterance examination and budgetary deficit. 6. Application of resorces was in the order of files, realia, samples, hanging chart, O.H.P and V.T.R. 7. The method of evaluation was mostly composed of paper and pens and practical evaluation when the practical evaluation was carrient out, in the case of necessity the standard of evaluation was made out.

• Journal of the Korean Society of Costume
• /
• v.53 no.3
• /
• pp.51-61
• /
• 2003

1. This study is to veri(y the characteristics of gauze fabrics focused on the them found at Sukga Pagoda. The remains researched are those of the Unified Shilla Dynasty around 8∼10 century. The found textile remains seem to be used as rugs or to be used for filling in spaces, wrapping silver reliquaries, equipments preserving relics of the Buddha, a gold-plated outermost reliquary, and so on. Since other remains found inside the Sukga Pagoda are national treasures, the textile remains can be considered as the fabrics of the highest quality. 2. Seven gauze fabrics, four non-designed gauzes and three designed gauzes, are found. They are all four-end complex gauze, weaved with the complex gauze technique. Two designed gauzes out of three designed gauzes are weaved in pattern by the clamp-resist dyeing technique and one is weaved in pattern by giving some changes in weaving. 3. In addition to the characteristics peculiar to gauze fabrics, such as thinness, fineness, and sparseness, another characteristic is found. That is, the difference in thickness between wefts and warps is over two times on the average in all of the seven gauze fabrics. Some of the gauze fabrics look like laces because of the huge difference in their thickness. 4. This research verified that with their transparency, are such materials that their beauty can easily be realized without adding various colors or patterns on the fabric by painting, embroidery, stitching old foil, or compound weaving technique.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.70-80
• /
• 2015

Construction waste is known to include a large part of coarse and fine aggregates, which can be recirculated in the industry. Separating those aggregates economically from the waste has been thus considered to be one of the most important issues in this field. In particular, paste mixed in the waste causes significant complain from the inhabitants living near the place where waste-processing equipments are built and operated. In this study, we investigate the operational principle of a newly developed paste separator by using theoretical (in this first part) and CFD (in the second part) analysis. The separator consists of a rotor which turned out to play a significant role in separating those pastes from the aggregates. Under suitable assumptions regarding the air flow velocity as well as the particle velocity, we show that particles can be stagnant at the outlet of the roto channel for a wide range of parameter values, which allow the particles to get enough time to settle down via the gravitation. We also demonstrate such phenomenon by using a simple numerical simulation.

• Journal of computational fluids engineering
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2014

Since experiments on the actual operational status are said to be very impractical because of their economic and repeatability problems, it is difficult to understand the thermal profiles of aerospace or military equipments. Thus, the CFD codes with considering the radiation heat transfer are used to compensate the defect. In case, analyzing the radiation exchanges between the object surfaces are very important. Because the temperature and the IR signal distributions of the object surface are significantly affected by the radiative heat transfer. To achieve accurate thermal radiation exchange between surfaces, it is important to calculate the radiation view factor precisely. Finer subdivision of meshes can be used to increase the accuracy of radiation view factor, but if the mesh is subdivided infinitely, the time required for calculation increases significantly and thus decreasing the efficiency. If the subdivision is not sufficient, assurance of accuracy is not guaranteed. In this paper, optimal mesh subdivision method using the solid angle has been successfully tested and found to be useful in increasing the efficiency of calculating the shape factors.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.2
• /
• pp.35-42
• /
• 1992

The effectiveness of the support-isolation system for the equipment mounted on the primary structure is evaluated to reduce its responses under the earthquake load with considering the interaction between the primary structure and the internal equipment in this paper. A computer code (KBISAP) is developed to analyze the above system using the matrix condensation technique and constant average acceleration method. To evaluate the effectiveness of the support-isolation system, three systems are used in this study as follows: i) fixed-base structure with support-fixed equipment, ii) base-isolated structure with support-fixed equipment and iii) fixed-base structure with support-isolated equipment. The results of case study show that the acceleration of equipment with the support-isolation system is less than that of the support-fixed equipment in the base-isolated structure and significantly reduced the response compared with that of the support-fixed equipment in the fixed-base structure with the reduction factor of 8. The support-isolation system used in this study can reduce the response and also increase the safety margin of the important safety-related internal equipments.

• Composites Research
• /
• v.15 no.1
• /
• pp.21-31
• /
• 2002

To overcome the disadvantages of conventional excavation technology various trenchless (or excavation free, or no-dig) repair-reinforcement technologies have been developed and tried. But trenchless technologies so far developed have some drawbacks such as high cost and inconvenience of operation. In this study, a repairing-reinforcing process for underground pipes with glass fiber fabric polymer composites using VARTM (Vacuum Assisted Resin Transfer Molding) has been developed. The developed process requires shorter operation time and lower cost with smaller and simpler operating equipments than those of the conventional trenchless technologies. For the reliable operation of the developed method, a simple method to apply pressure and vacuum to the reinforcement was devised and flexible mold technology was tried. Also, resin filling and cure status during RTM process were monitored with a commercial dielectrometry cure monitoring system, LACOMCURE. From the investigation, it has been found that the developed repairing-reinforcing technology with appropriate process variables and on-line cure monitoring has many advantages over conventional methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.193-198
• /
• 2012

Field and laboratory tests were performed to investigate the swelling(L value) and shrinkage modulus (C value) of soil and rock mixtures using 2 sites. According to test results, when disturbed soil and rock were mixed with same amount (5:5), the maximum density was achieved and showed 19% and 18% increased at each site comparing with the unit weight of rock only. Since measured L values of mixtures were overestimated about 4 to 11% compare to estimated values based on the conventional method. While C values were underestimated about 13~20% compare to conventional values due to the development of compacting equipments and effective construction management. When rock and soil were mixed in the ratio of 5 to 5, the unit weight of the mixture was higher than that of other mixtures and rock or soil only.