• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.5
• /
• pp.530-534
• /
• 2015

Ultrasonic nanocrystal surface modification (UNSM) is an example of a nanoscale-surface modification that has become noticeable because of its effects on the mechanical improvement of metallic materials. UNSM equipment needs to be both utilized and improved. The equipment is based on an ultrasonic waveguide whose role is to strike surfaces of metallic materials to achieve nanoscale deformation. In this paper, we introduce the development of one kind of UNSM equipment. Using piezoelectric elements, we repeatedly design and fabricate a 20-kHz ultrasonic waveguide. With respect to the composition of the equipment, the waveguide is automatically transferred by two axial stages automatically. In addition, a static force is constantly applied by pneumatic devices. We perform an experiment to verify the feasibility of the equipment.

• The Journal of the Korea Contents Association
• /
• v.16 no.3
• /
• pp.257-268
• /
• 2016

The purpose of this research is to find the cause of low degree of utilization of medical equipment that are provided as Official Development Assistance(ODA) and to suggest an effective medical equipment support system for ODA. This research analyzes the supporting process of the medical equipment as ODA in Kitengela Health Center in Kenya. As the result of analysis, it has been found that the following problems. 1) It was found that users was attended insufficient to demand medical equipment. 2) The determination of medical equipment request was inadequate. 3) It was appeared to be organized the compilation of the budget for purchases and operation of medical equipment 4) The improvement of procurement system of medical equipment was appeared to need. 5) It was appeared to need to build conditions for installation of medical equipment. 6) It was necessary to secure finance, to conduct periodic management training, and to ensure available human resources in management and maintenance in order to sustain the medical equipment management ability and it is encouraged to promote leadership in healthcare facility management. Finally, the theoretical and practical implications of this research are discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.4
• /
• pp.501-508
• /
• 2019

In this paper, a study on a wireless check-up method of test equipment for captive flight test(CFT) was conducted. For CFT, test equipment is mounted on a POD, and check-up is carried on the test equipment's. For check-up the POD wirelessly, battery, power distribution unit, wireless communication devices were designed within the POD, and a check-up device is designed outside of the POD. Once the external check-up device sends a 'start signal' to the POD, it performs the overall check-up procedures and transmits the 'end signal' to the external check-up device. Detailed check-up results are stored in an internal storage device, and are possible to read from external check-up device if necessary, thereby improving the reliability of the wireless check-up. By implementing and applying these wireless check-up system, the reliability of the check-up was enhanced by dynamical and movable check-up, and safety is guaranteed as the check-up was carried without access to the aircraft.

• Journal of Multimedia Information System
• /
• v.8 no.4
• /
• pp.285-294
• /
• 2021

The development process of domestic CG (Computer Graphics) needs to be studied by classifying the technical part and the design part. This paper analyzes how early domestic broadcast equipment evolved and focused on what went through the development process. Domestic broadcasting companies have introduced and used overseas equipment and have begun to develop their own technology. The development process of the early domestic production technology of broadcasting stations was classified into Character Generator, On-line Real-Time Graphic and Sport Coder. It was found that the orientation of broadcasting technology was conclusively focused on visualization, with socio-cultural factors acting along with the evolution of hardware and software. This research is meaningful in reorganizing the history of the development process of domestic CG technology in the early days through previous research (primary verification), newspaper articles and news coverage (secondary verification). This paper looks at what is missing by regaining the past of CG, and argues that with the advent of new technologies today, we must develop through appropriate division of roles and collaboration between engineers and designers.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.1
• /
• pp.70-78
• /
• 2021

Naval surface ships and submarines could be exposed to non-contact underwater explosion(UNDEX) environment. Equipment installed on the ships and submarines could be damaged by shock load generated by UNDEX environment. Therefore, shock survivability of equipment generally evaluated by shock tests. Ground based shock test machine such as Light weight shock test machine(LVSM) is developed to simulate shock load caused by UNDEX environment. In this study, linear dynamic model of LVSM is proposed and evaluated to improve shock test design procedure. Parameters of the model are decided by optimizing time domain response compared to zero payload experiment. Proposed model is verified by comparing simulation results and test results of maximum payload experiment. Finally, shock test design using the model is described for various test equipment weight.

• Asian Journal of Innovation and Policy
• /
• v.11 no.2
• /
• pp.148-182
• /
• 2022

This study analyzed changes in the national research facilities & equipment (RFE) policies historically promoted by the Rho administration (2003~2007), Lee administration (2008~2012), Park administration (2013~2016), and Moon administration (2017~2019) in South Korea. By adding new variables such as policy goals and policy means to a model suggested by Hogwood and Peters (1983), policy change types and their flow could be better classified. Korean RFE policies showed various flows in the policy change types instead of a general flow, which is the order of policy innovation -> policy innovation -> policy succession -> policy succession. This finding indicates that each administration could pursue a higher-level policy change purposively. It is highly required to prepare policy development that devotes to organizing and operating a national council, reflecting in the government's comprehensive plan after evaluating policy effectiveness, improving items needed for the RFE status survey, and unifying the research equipment registration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.673-676
• /
• 2017

The Offshore drilling system of domestic drilling systems (drill rigs, drill ship) in Korea is dependent on full imports and the monopolistic situation of a few foreign large corporations is intensifying. In addition, most of domestic technology development tries to develop single product oriented products until now, but it is necessary to develop monitoring control system for package unit commercialization by approaching package development method. Therefore, we will develop a control monitoring system that can integrate the single equipment of the mud system developed previously.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.72-73
• /
• 2021

As discussions of the International Maritime Organization for the introduction of the Marine Autonomous Surface Ship (MASS) began in earnest, discussions were conducted to prioritize cybersecurity (Cyber Risk Management) when developing a system to support MASS operation at the 27th ENAV Committee Working Group (WG2). Korea launched a technology development project for autonomous ships in 2020, and has been promoting detailed tasks for cybersecurity technology development since 2021. MASS operation in a digital maritime communication system environment requires network security of various digital equipment that was not considered in the existing maritime communication environment. This study introduces the basic concept of network security equipment to support MASS operation in the detailed task of cybersecurity technology development, and defines the network security equipment interface for MASS ship application in the basic stage.

• Journal of the Korean Society of Industry Convergence
• /
• v.9 no.1
• /
• pp.79-86
• /
• 2006

In this study, we research and develope Intelligent Remote management controller. According to the load condition, we will apply various control techniques and plan high efficient Demand control. After development, According to the Demand Control, An electricity enterprisers will expect enlargement of equipment coefficient, elevation of back up load factor and reduction effect of equipment investment. On Customer side, They will expect reduction of electric fee, saving energy and variety of service choice.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2010.05a
• /
• pp.201-205
• /
• 2010

Earthwork is an essential initial work discipline in construction projects and open to significant impacts of several factors such as weather, site conditions, soil conditions, underground installations and available construction machinery, calling for careful planning by managers. However, selection and combination of construction machinery and equipment for earthwork still depends on experience or intuition of managers in construction sites, with much room left for proper management in terms of cost, schedule and environmental load control. This research aims to analyze the performance of earthwork equipment and establish relations among various factors affecting a model for optimizing selection and combination of earthwork equipment as a precursor to the development of such model. We expect the conclusions herein to contribute to optimizing selection and combination of earthwork equipment and provide basic inputs for the development of applicable model that can save costs, reduce schedule and mitigate environmental load.