• Journal of fish pathology
• /
• v.29 no.1
• /
• pp.35-43
• /
• 2016

In comparison to the numbers of such studies of fish, few studies have been carried out on the immunity, physiology and ecology of abalone, while studies on abalone disease are also extremely rare. Moreover, mass mortality of cultured abalone due to pathogenic bacteria has not been reported in the southern coast of Korea. However, Vibrio-like bacteria have been isolated from dead abalone, which indicates that a review is required in order to determine the cause of abalone mortality. Use of an antimicrobial agent to minimize the damage caused by disease in abalone farms is common, but the therapeutic effects are insignificant. Demand for probiotics has increased, but research on the development of probiotics for use in abalone culture is very rare. Therefore, the present study isolated KC16-2 from fermented kimchi soup and investigated the characteristics of the isolate as a candidate probiotic bacterium in abalone. KC16-2 was identified as Bacillus amyloliquefaciens (B. amyloliquefaciens KC16-2) based on its biochemical properties and 16S rRNA gene sequence. B. amyloliquefaciens KC16-2 showed inhibitory effects against the growth of various vibrios in vitro, and kept the numbers constant until four days after inoculation in marine water at a temperature of $15{\sim}25^{\circ}C$, indicating the possible use of KC16-2 as a probiotic, except in the winter. The growth of KC16-2 was inhibited by bile salt, but the numbers increased over time suggesting the bacteria were still alive in the abalone's digestive tract. Abalone fed with a diet including KC16-2 for 12 weeks showed good growth, but showed no significant differences from the control group. However, the mortality of the abalone supplied the probiotic diet was reduced to half that of the control group in a challenge test with Vibrio tubiashii. Therefore, we suggest that B. amyloliquefaciens KC16-2 could be used as a probiotic bacterium for control of the mortality of abalone caused by opportunistic pathogenic vibrios.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.2
• /
• pp.182-187
• /
• 1985

This study was attempted to evaluate the chemical components of Aldaegu, Gadus macrocephalus, which consumed as a salted and dried product popularly in Korea. The contents of such compounds as amino acids, nucleotides and their related compounds, fatty acids and minerals were analysed. The content of total free amino acids was 814.9 mg% on dry basis and the major amino acids were tyrosine, alanine, histidine, leucine, phenylalanine, lysine and valine in a decreasing order. These amino acids were resulted as 45% of total free amino acids in Aldaegu. In the nucleotides and their related compounds, inosine and hypoxanthine were the only compounds detected. The overall content of nucleotide and their related nitrogenous compounds, free amino acid-N., ammonia-N., creatine and creatinine-N., and betaine-N., was 78.6% of extractable nitrogen. Ammonia-N was the most abundant of other nitrogenous compounds, resulting 36.6% of extractable nitrogen from the sample. In the fatty acid composition of total lipid and phospholipid, polyenoic fatty acid was abundant holding about 48% respectively. However, higher amounts of saturated fatty acids(39.8%) were found in glycolipid, and the predominant fatty acids in quantity were palmitic $acid(C_{16:0})$, stearic acid $(C_{18:0})$, oleic $acid(C_{18:1})$, docosahexaenoic $acid(C_{22:6})$, eicosapentaenoic $acid(C_{20:5})$ and eicosatetraenoic $acid(C_{20:4})$. Aldaegu contained 27,430 ppm of sodium and the trace amount of lead and cadmium was detected, which gave a good safety in the food sanitation aspects. It was presumed that free amino acids, ammonia, hypoxanthine, betaine, creatine and creatinine, and minerals play an important role for the characteristics of taste and flavor of Aldaegu.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.3
• /
• pp.235-243
• /
• 2020

In recent years, the use of high-strength concrete has increased with increasing height and enlarging scale of the buildings However, it has been pointed out that the use of high-strength concrete is the most serious problem compared to ordinary concrete in terms of the spalling of concrete cross sections caused by fires. For this reason, fiber cocktail methods, which are made of polypropylene fibers, nylon fibers, etc., are mainly used to improve the fire resistance performance. However, the majority of research on high-strength concrete to which the fiber cocktail method was applied is mainly focused on the effect of reducing spalling, and few studies have investigated and analyzed the effect of micropores produced by melting PP fibers on the long-term durability of high-strength concrete after a fire. Therefore, in this study, the effect of micropores on the depth of carbonation was examined through carbonation tests and microstructure analysis, assuming high-strength concrete to which fiber-mixed construction method was applied, which caused fire damage.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.305-312
• /
• 2010

During a last decade, the introduced traits in commercialized GM crops have been diversified from a simple trait such as herbicide resistance gene or insectresistance gene which are related to the crop production into more complicated traits such as modification of fatty acid or essential amino acid composition, modified coloring pattern of flower. In addition, it was investigated that several other GM crops bearing more refined traits expected to lead next generation are also awaiting for risk assessment (RA) or under field test for the preparation of RA in the near future. These GM crops include abiotic stress resistance including drought or cold, increased biomass, production of bioethanol or diesel, production of pharmaceuticals or functional materials for industrial. In particular, in 2008 and 2009, it was reported that the highest number of GM crops for molecular farming are under developed in laboratory or green house level in all the world. Likewise, in Korea, 171 events from 49 plant species are under developed to introduce several important traits. At present, about 10 events are under field test to select elite lines for RA application. For the first time, herbicide resistance turfgrass developed by Korean research team has been submitted for RA and currently under requested for additional data. Moreover, GM rice resistant to leaf roll (folder) disease is expected as a next event to be submitted for RA application.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.21-32
• /
• 2012

Exclusive bus lane (EBL) is typically located in the roadway median, and is accessed by weaving across the GPLs(general purpose lanes) before entering from the left lane of the GPLs. To maximize the potential for successful EBL operations, a critical design issue that requires special attention is the length of bus weaving section before entering EBL. The process of developing guidelines for the length of bus weaving section can be supported by a sensitivity analysis of performance measure (safety) with respect to the bus weaving distance. However, field data are difficult to obtain due to inherent complexity in creating performance measure (safety) samples under various interesting flows and bus weaving distance that are keys to research success. In this paper, VISSIM simulation is applied to simulate the operation of roadway weaving areas with EBL, and based on vehicle trajectory data from microscopic traffic simulation models, the Surrogate Safety Assessment Model (SSAM) computes the number of surrogate conflicts (or degree of safety) with respect to the bus weaving distance. Then, a multiple linear regression (MLR) model using safety data (number of surrogate conflicts) is developed. Finally, guidelines for bus weaving distance are established based on the developed MLR. Developed guidelines explicitly indicate that a longer bus weaving distance is required to maintain desired safety as weaving volume increases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7012-7017
• /
• 2014

The process of international technical cooperation is quite complex. If the complexity is reduced and mirrored as a simple model, it could be of great assistance to government agencies and staff to support international technical cooperation. The purpose of this paper was to develop the underlying process model in international technical cooperation in the evaluation phase. The paper provides in the second chapter the theoretical background for developing a process model. In the third chapter, the features and the practical model of the evaluation phase are presented. Chapter four presents a case with substantial empirical analysis of the development model. EU FP7th as a case study was examined in the hindsight of international technical cooperation in the evaluation process. The concluding, chapter five, presents the limitations and future research directions. The results show that a new phase can be analyzed on the level of the evaluation step. The limitation of this study was that the empirical study consists of a single case study only. In the future, it will be necessary to study the sub stages of other steps in international technological cooperation.

• Management & Information Systems Review
• /
• v.36 no.4
• /
• pp.129-148
• /
• 2017

Conventional exhibition management information systems recommend tourist attractions that are close to the place in which an exhibition is held. Some recommended attractions by the location-based recommendation could be meaningless when nothing is related to the exhibition's topic. Our goal is to recommend attractions that are related to the content presented in the exhibition, which can be coined as content-based recommendation. Even though human exhibition curators can do this, the quality is limited to their manual task and knowledge. We propose an automatic way of discovering attractions relevant to an exhibition of interests. Language resources are incorporated to discover attractions that are more meaningful. Because a typical single machine is unable to deal with such large-scale language resources efficiently, we implemented the algorithm on top of Apache Spark, which is a well-known distributed computing framework. As a user interface prototype, a web-based system is implemented that provides users with a list of relevant attractions when users are browsing exhibition information, available at http://bike.snu.ac.kr/WARP. We carried out a case study based on Korean Tourism Organization Linked Open Data with Korean Wikipedia as a language resource. Experimental results are demonstrated to show the efficiency and effectiveness of the proposed system. The effectiveness was evaluated against well-known exhibitions. It is expected that the proposed approach will contribute to the development of both exhibition and tourist industries by motivating exhibition visitors to become active tourists.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.11
• /
• pp.67-75
• /
• 2014

In this study, the staged seismic performance evaluations were conducted to the 91 high speed railway tunnels in use for checking whether to comply with the recent design criteria or not. In addition, the seismic fragility functions of the tunnels were developed to allow the probabilistic risk assessment. The results of the staged seismic performance evaluations which consist of a preliminary assessment and a detailed assessment, show that the tunnels comply with the recent design criteria. With reference to the results of previous studies, a form of the proposed seismic fragility functions was set as a log-normal distribution by PGA, and the parameters of the functions were determined by using the probability of damage for the design PGA level. The seismic fragility functions were developed for each types (Cut & Cover, NATM) of tunnels. The seismic fragility functions from this study and the existing research results (FEMA, 2004) were compared to evaluate the seismic performance level of the tunnels, as a result the tunnels of this study were relatively superior to the ASSM tunnels on the seismic performance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.5
• /
• pp.175-188
• /
• 2016

This study is intended to look into the effects of project managers' leadership on participants' individual competency and project performance. To achieve this, a survey was empirically carried out to a sample of 276 researchers who are working on a project with a research and development group in private R&D centers. The results of this study were summarized as follows. First, the leadership competency of project managers had a significant positive effect on the individual competency of project participants. Second, the leadership competency of project managers had a significant positive effect on the project management performance. Third, the leadership competency of project managers had no significant effect on the project completion performance. Fourth, the individual competency of project participants had a significant positive effect on the project management performance. Fifth, the individual competency of project participants had no significant effect on the project completion performance. Sixth, the project management performance had a significant positive effect on the project completion performance. Seventh, the project completion performance was indirectly mediated in the effect of project managers' leadership competency on project completion performance. Eighth, the project management performance was indirectly mediated in the effect of project participants' individual competency on project completion performance. Based on the findings stated above, a combination of project management performance can generate better results in the effect of project participants' individual competency on project completion performance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.57-63
• /
• 2012

Software release planning model of software product lines was formulated as a precedence-constrained multiple 0-1 knapsack problem. The purpose of the model was to maximize the total profit of an entire set of selected features in a software product line over a multi-release planning horizon. The solution approach is a dynamic programming procedure. Feasible solutions at each stage in dynamic programming are determined by using backward dynamic programming approach while dynamic programming for multi-release planning is forward approach. The pre-processing procedure with a heuristic and reduction algorithm was applied to the single-release problems corresponding to each stage in multi-release dynamic programming in order to reduce the problem size. The heuristic algorithm is used to find a lower bound to the problem. The reduction method makes use of the lower bound to fix a number of variables at either 0 or 1. Then the reduced problem can be solved easily by the dynamic programming approaches. These procedures keep on going until release t = T. A numerical example was developed to show how well the solution procedures in this research works on it. Future work in this area could include the development of a heuristic to obtain lower bounds closer to the optimal solution to the model in this article, as well as computational test of the heuristic algorithm and the exact solution approach developed in this paper. Also, more constraints reflecting the characteristics of software product lines may be added to the model. For instance, other resources such as multiple teams, each developing one product or a platform in a software product line could be added to the model.