• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.469-476
• /
• 2008

In this paper, it is shown that an input-output (I/O) feedback linearized controller can be designed rationally by utilizing the time-scale properties of heave and pitch for an underwater vehicle. It is assumed that the dynamics of the vehicle is restricted to the vertical plane. An output-feedback control is designed, which stabilizes steady cruising paths. It is shown that the vehicle dynamics with acceleration as output becomes minimum phase. The dynamics can be transformed into a reduced system through a kind of partial linearization and singular perturbation technique. The reduced system is not only minimum phase but also exactly I/O linearizable via feedback. The I/O dynamic characteristics of the heave and pitch modes can be made linear and decoupled. Furthermore it becomes independent of cruising condition such as vehicle velocity. This study may help for designing autopilot systems for underwater vehicles.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1100-1101
• /
• 2008

After lamination process, Isc is increased by sheet reflection. This paper presents the electrical output characteristics by back sheet reflection. The experiments was conducted by using single crystalline and multi crystalline PV module. The reflection area of single crystalline PV module is larger than multi one due to the difference of solar cell manufacturing. The experiments show that the increased performance ratio of single crystalline PV module output power is 1.55% rather than that of multi crystalline PV module output power is 1.13%. In addition, it is expected that the output power of single one rather than multi-one is increased by the lower temperature when the PV module is installed outside. The results can be reconsidered by the test material and test process. Back sheet used for humidity prevention makes PV module output power increasing.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.5
• /
• pp.7-13
• /
• 2017

Purpose - The purpose of this paper is to analyze the relationship between the real exchange rate and the output, which is based on the macroeconomic equilibrium theory in China. Its aim will be to verify whether the change in the real exchange rate has a significant effect on the output or not. Research design, data, and methodology - This study endeavors tries to investigate the correlation among economic variables under the macroeconomic market (the commodity market and the money market) equilibrium. So, time-series data from 1990 to 2016 is applied to establish a vector auto-regression (VAR) model so as to perform an empirical analysis. Results - The empirical results reveal that an increase in the real exchange rate will result in an increase in the output in the short run. However, the empirical results also indicate that this kind of mechanism cannot work in the long run. Conclusions - The effect of a decrease of real exchange rate on output is significant in the short run. Also, this paper suggests that the total supply and the total demand can promote economic growth. The fiscal and money policy play a significant role in economic growth in China as well.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.5
• /
• pp.1874-1885
• /
• 2018

The customer side operation is getting more complex in a smart grid environment because of the adoption of renewable resources. In performing energy management planning or scheduling, it is essential to forecast non-controllable resources accurately and robustly. The PV system is one of the common renewable energy resources in customer side. Its output depends on weather and physical characteristics of the PV system. Thus, weather information is essential to predict the amount of PV system output. However, weather forecast usually does not include enough solar irradiation information. In this study, a PV system power output prediction model (PPM) under limited weather information is proposed. In the proposed model, meteorological radiation model (MRM) is used to improve cloud cover radiation model (CRM) to consider the seasonal effect of the target region. The results of the proposed model are compared to the result of the conventional CRM prediction method on the PV generation obtained from a field test site. With the PPM, root mean square error (RMSE), and mean absolute error (MAE) are improved by 23.43% and 33.76%, respectively, compared to CRM for all days; while in clear days, they are improved by 53.36% and 62.90%, respectively.

• Journal of Distribution Science
• /
• v.19 no.12
• /
• pp.1-14
• /
• 2021

Purpose: For the last few decades, TQM has become a hot topic in the inner-disciplinary field in the production management line. Still, unfortunately, the study of TQM and Quality Output management is partially only attached to the tangible side in the production management line. Whereas theoretically, the implications of TQM require incremental improvement in all management lines (e.g., HRM, Marketing, Operations, and Distribution Management). Therefore, starting from the main problem, this study aims to analyze the effect of total quality management, Organizational Culture, Perceived Distribution of Quality Awareness, and quality output through a more in-depth analysis. Research design, data and methodology: We conducted a survey of 170 respondents from managers, staff, and employees from 48 companies in Indonesia. We used a quantitative approach with the SEM method to answer this study's problem formulation and hypotheses. Results: The results of our research stated that based on the demonstration of statistical test results, all hypotheses were positive and significant, both direct and indirect relationship demonstrations. Conclusions: Universally, the findings in this study illustrate that the supporting factor for creating value-added in TQM and Quality output lies in the optimal and positive organizational culture and Perceived Distribution Quality Awareness factors in the organization.

• Korean Journal of Materials Research
• /
• v.31 no.11
• /
• pp.649-656
• /
• 2021

K_0.5Bi_0.5TiO₃ (KBT) thin films were prepared by sol-gel processing for future use in piezoelectric generators. It is believed that the annealing temperature of films plays an important role in the output performance of piezoelectric generators. KBT films prepared on Ni substrates were annealed at 500 ~ 700 ℃. Tetragonal KBT films were formed after annealing process. As the annealing temperature increased, the grain size of KBT films increased. KBT thin films show piezoelectric constant (d₃₃) from 23 to 41 pC/N. The increase of grain size in KBT films brought about output voltage and current in the KBT generators. Also, the increase in the displacement of specimens during bending test resulted in increases in output voltage and current. Although KBT generators showed lower output power than those of generators prepared using NBT films, as reported previously, the KBT films prepared by sol-gel method show applicability as piezoelectric thin films for lead-free nano-generators, along with NBT films.

• International Journal of Knowledge Content Development & Technology
• /
• v.10 no.2
• /
• pp.51-69
• /
• 2020

This paper describes global research in the field of augmented reality (22078) as indexed in Scopus database during 1992-2019, using a series of bibliometric indicators. The augmented reality (AR) research registered high 54.23% growth, averaged citation impact of 8.90 citations per paper. Nearly 1% of global output in the subject (226 papers) registered high-end citations (100+) per paper. The top 15 countries accounted for 87.05% of global publications output in the subject. The USA is in leadership position for its highest publications productivity (19.25% global share). The U.K. leads the world on relative citation index (2.05). International collaboration has been a major driver of AR research pursuits; between 11.89% and 44.04% of national share of top 15 countries in AR research appeared as international collaborative publications. AR research productivity by application types was the largest across sectors, such as education, industry and medical. Computer science has emerged as the most popular areas in AR research pursuits. Technical University of Munich, Germany and Osaka University, Japan have been the most productive organizations and Nara Institute of S&T, Japan (66.55 and 7.48) and Imperial College, London, U.K. (57.14 and 6.42) have been the most impactful organizations. M. Billinghurst and N. Navab have been the most productive authors and S. Feiner and B. MacIntyre have been the most impactful authors. IEEE Transactions on Visualization & Computer Graphics, Multimedia Tools & Applications and Virtual Reality topped the list of most productive journals.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.239-244
• /
• 2011

In this paper, we analyzed the electrical characteristics with crack pattern in crystalline solar cell. crystalline solar cells with a thin substrate, even small shocks can be easily damaged. Before the module goes through many processes, because the solar cells are at risk of a crack. That occurred early in the PV module micro-crack is not easily detection by eye test or output test. Because the EL (Electroluminescence) device has been detected using. PV module is made by laminated of a variety of materials. By different properties of each material will affect the crack. For this reason, the crack will grow and affect the output. And We analyzed the three crack patterns in crystalline solar cell. A growth of cracks on crystalline solar cell was interpreted by analysing generated cracks on the PV modules. Based on this interpretation, an electrical output value was calculated by mathematical modeling on electrical output characteristic with each crack patterns.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.2
• /
• pp.325-349
• /
• 2004

This paper tried to evaluate an economic analysis about research and development far areas of renewable resource in Korea. To evaluate this validity, we tried to calculate the spillover effect of R＆D investment through input-output table. In the first stage of spillover effect, we simply calculate the rate of return on R＆D investment for renewable energy resources in Korea through the input-output model, which can calculate the value added as well as output based upon the price of 2000 year. According to the first stage calculation, the rate of return on R＆B investment in solar heat is higher than any other renewable energy. In the second stage we tried to calculate the second round of spill over effect, which derives from the additional amount of supply of renewable resources due to the R＆D investment. The overall evaluation of R＆D invesment including the first stage as well as second stage spillover effect shows that bio-energy and waste energy generate 14 times as well as 2.5 times in the rate of return respectively.

• Journal of Climate Change Research
• /
• v.7 no.1
• /
• pp.59-68
• /
• 2016

The world's major countries have focused on the renewable energy industry as the solution to climate change and the energy crisis. Nevertheless, there are no studies on the economic effects of the renewable energy industry. This study analyzed the economic effects of Korea's renewable energy industry by using the 2010 Input-Output Table. It is estimated that Korea's renewable energy industry made a production-induced effect of 2.0262 won, and a value-added-induced effect of 0.6138 won through an increase in output growth of 1 won, and an employment-induced effect of 2.3046 labors through an increase in output growth of 1 billion won. Both the effect ratio and the response ratio were greater than 1, which means the renewable energy industry is an intermediate manufacturing industry whose forward linkage effect and backward linkage effects are large. These results show differences with previous studies that classified electricity sector and renewable energy industry into final primary production industries. It is expected that the economic effects of the renewable energy industry will become greater in the future. Therefore, research on statistics related to the renewable energy industry is needed for more precise analysis.