• 한국치위생학회지
• /
• 제12권6호
• /
• pp.1193-1202
• /
• 2012

Objectives : The purpose of our study was to examine the relationship of oral health status such as dental caries and the performance of dietary action guides with six items. Methods : Oral examination and self-administrated questionnaire were conducted on 87 disabled students, aged 6-19 who were attending special school in the area of the metropolitan Seoul. Two logistic regression models to estimate odds ratios and 95% confidence intervals were used to investigate the association dental caries experience and the performance of dietary action guides after controlling for potential confounders. Results : The proportion of study subjects with caries were 37.9%, 26.9%(male) and 54.3%(female), respectively(p<0.05). There was significantly difference the subjects with caries and perceived oral health status(p<0.01). Among the dietary action guides items, skipping breakfast and not avoiding waste food were significantly higher in the proportion of subjects' caries(p<0.05, p<0.01, respectively). The avoiding waste food groups had more possibility of having caries significantly(p<0.05), even after controlling gender, and perceived oral health status. Conclusions : These results indicate that oral health promotion policy with dietary action guides should be strengthened for support of disabled student's dental health.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.153-156
• /
• 2008

The serviceability evaluation methods regarding floor vibration can be found in foreign building codes or design guides for vibration. AISC, AIJ, CEN, CSA and ISO are sucn examples. However, because the those guides are based on each country's experimental results, there will be different evaluation results for the same conditions. Meanwhile, in korea, we have little research results that suits for our condition, and we continue to use those foreing guides. In this paper, 20 flat plate slabs were carried out to investigate the accuracy of existing frequency formulas.

• Journal of the Korean Data and Information Science Society
• /
• 제16권1호
• /
• pp.79-94
• /
• 2005

This study examines which factors affect on Job-Satisfaction of Tour Guide in Korea, perceiving that Job-Satisfaction of Tour Guide affects customer satisfaction, and outcomes of business. In the tourism industry, Tour Guides are one of the most important factors influencing customer satisfaction, because they are one of the key front- line players. Ultimately, the purpose of this study is to present the importance of efficient management for human resources through investigating Job-Satisfaction of Tour Guide. To active purpose of this study, both literatures and empirical research based on Japanese, and Chinese Tour Guides in Korea were adopted and conducted. In conclusion, in order to improve psychological and behavioral outcomes of the Tour Guides, job satisfaction factors have to be improved in many ways and also travel managers should consider them.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.41.1-41.6
• /
• 2019

Backgrounds: The purpose of this study is to discuss the total joint reconstruction surgery for a patient with recurrent ankylosis in bilateral temporomandibular joints (TMJs) using three-dimensional (3D) virtual surgical planning, computer-aided manufacturing (CAD/CAM)-fabricated surgical guides, and stock TMJ prostheses. Case presentation: A 66-year-old female patient, who had a history of multiple TMJ surgeries, complained of severe difficulty in eating and trismus. The 3D virtual surgery was performed with a virtual surgery software (FACEGIDE, MegaGen implant, Daegu, South Korea). After confirmation of the location of the upper margin for resection of the root of the zygoma and the lower margin for resection of the ankylosed condyle, and the position of the fossa and condyle components of stock TMJ prosthesis (Biomet, Jacksonville, FL, USA), the surgical guides were fabricated with CAD/CAM technology. Under general anesthesia, osteotomy and placement of the stock TMJ prosthesis (Biomet) were carried out according to the surgical planning. At 2 months after the operation, the patient was able to open her mouth up to 30 mm without complication. Conclusion: For a patient who has recurrent ankylosis in bilateral TMJs, total joint reconstruction surgery using 3D virtual surgical planning, CAD/CAM-fabricated surgical guides, and stock TMJ prostheses may be an effective surgical treatment option.

• The Korean Journal of Pain
• /
• 제27권4호
• /
• pp.311-312
• /
• 2014

• Korean Journal of Radiology
• /
• 제23권3호
• /
• pp.295-297
• /
• 2022

• 대한인간공학회지
• /
• 제32권1호
• /
• pp.125-137
• /
• 2013

Objective: The aim of this study was to comprehend major concepts and flows that penetrate international guides or standards for developing a quantitative possibility measure of human errors that can be committed or omitted in nuclear power plants. Background: For a few past decades, lots of researchers have studied the effect of stress and/or fatigue which can result in human errors. Thus, this study was carried out on the assumption that much of them were summarized as an international guidelines or manuals, if any, for human error prevention. Method: A literal survey was conducted with materials and documentation published by international organizations related with safety and standardization, such as ISO, OSHA, NIOSH, NASA, and so on with special reference to human error prevention through management of work stress and fatigue as major Performance Shaping Factors. Results: International guides or management manuals on stress or fatigue management for human error prevention hardly were found, and most researches seemed to concentrate on one of them individually. Conclusion: There was few vestige of research that studied both concurrently. However, it was verified that not a few researches have been tried to develop quantitative measures to estimate probability or job characteristics for human error prevention and/or performance downgrading. Application: The results of this study would help to develop a causal model of human errors due to work stress and fatigue that can result in unexpected accidents in nuclear power plant.

• Design & Manufacturing
• /
• 제17권2호
• /
• pp.22-26
• /
• 2023

As Light-Emitting Diodes(LEDs) continue to advance in performance, their application in automotive lamps is increasing. Automotive LEDs utilize light guides not only for aesthetics but also to control light quantity and direction. Light guides employ patterns of a few hundred micrometers(㎛) to regulate the light, and the surface roughness(Ra) of these patterns can reach tens of nanometers(nm). Given that these light guides are produced through injection molding, mold processing technology with high surface quality micro-patterns is required. This study serves as a preliminary investigation into the development of high surface quality micro-pattern processing technology. It examines the surface roughness of the workpiece based on the cutting direction of the pattern and the cutting fluid type when cutting micro-patterns on STAVAX steel using cubic Boron Nitride(cBN) tools. The experiments involved machining a step-shaped micro-pattern with a height of 60 ㎛ and a pitch of 400 ㎛ in a 22×22 mm area under identical cutting conditions, with only the cutting direction and cutting fluid type being varied. The machining results of four cases were compared, encompassing two cases of cutting direction(parallel to the pattern, orthogonal to the pattern) and two cases of cutting fluid type (flood, mist). Consequently, the Ra value was found to be the highest(Ra 128.33 nm) when machining with the flood type in parallel to the pattern, while it was the lowest(Ra 95.22 nm) when machining with the mist type orthogonal to the pattern. These findings confirm that there is a difference of up to 25.8 % in the Ra value depending on the cutting direction and cutting fluid type.

• Journal of Radiation Protection and Research
• /
• 제41권3호
• /
• pp.282-285
• /
• 2016

Background: To optimize the photon transmission efficiency of light guides used in scintillation detectors, LightTools code, which can construct and track light, was used to analyze photon transmission effectiveness with respect to light guides thickness. Materials and Methods: This analysis was carried out using the commercial light guide, N-BK 7 Optical Glass by SCHOTT, as a model for this study. The luminous exitance characteristic of the LYSO scintillator was used to analyze the photon transmission effectiveness according to the thickness of the light guide. Results and Discussion: The results of the simulations showed the effectiveness of the photon transmission according to the thickness of the light guide, which was found to be distributed from 13.38% to 33.57%. In addition, the photon transmission efficiency was found to be the highest for light guides of 4 mm of thickness and a receiving angle of $49^{\circ}$. Conclusion: Through such simulations, it is confirmed that photon transmission efficiency depends on light guide thickness and subsequent changes in the internal angle of reflection. The aim is to produce an actual light guide based on these results and to evaluate its performance.

• 한국가정과교육학회지
• /
• 제9권2호
• /
• pp.115-130
• /
• 1997

The purposes of this study are：(1) to analyze the learning content & subjects on the area of clothing and textiles in Home Economics for Young Men： A Teaching Guide, (2) to compare it with the learning content & subjects on the area of clothing and textiles in Home Economics teaching guides in the middle school in Korea, (3) to provide preliminary data for developing the learning content & learning method on clothing and textiles education for middle school students. To implement these proposals, Home Economics for young Men： A Teaching Guide in U.S.A and 6 Home Economics teaching guides for the middle school in Korea are reviewed and analyzed. The research findings were as follows： 1. Home Economics for Young Men is characterized as including： (1) interesting learning contents for girls and boys in the middle school, (2) learning contents for helping students to work on their own initiative (3) learning contents related to actual life, (4) practical consumer education content related to clothing and textiles area, (5) learning contents for developing originality, (6) learning contents related to vocational education. 2. The subjects in Home Economics for Young Men give careful considerations especially on how to learn. They are based on the idea that middle school students have to learn and to solve the subject by themselves. 3. Learning contents on Home Economics teaching guides for middle school in Korea are different from learning contents in Home Economics for Young Men in the subject & the form of description, the subject matter of practice in clothing area, the standpoint of description on clothing matters. The subjects in Home Economics teaching guides for middle school in Korea don’s give careful consideration on how to learn. There are little idea that middle school students have to learn and to solve the subject by themselves.