• Design & Manufacturing
• /
• v.17 no.3
• /
• pp.8-14
• /
• 2023

In this study, basic research was conducted on manufacturing technology of thick-walled light guide a component that controls the light source of automobile lamps. As a preliminary study for manufacturing the final injection molded parts, a model for analyzing the influence of micro patterns on light guides is presented. The optical characteristics of the light guide were analyzed according to the change of the curvature radius of the micro-optical pattern, and the injection molding characteristics of the light guide according to the change of injection molding conditions were analytically evaluated. It was confirmed that the luminance uniformity improves as the R value decreases for changes in the micro-pattern R value, but it was confirmed that there are technical limitations in actual injection mold core processing and high-replication injection molding. Injection molding analysis showed that cooling channel design is very important compared to general injection molding due to thick-wall characteristics and thickness variation. It was also confirmed that the cooling channel has a great influence on the cycle time and birefringence result due to residual stress. As a result of analyzing the influence of filling time, holding condition, and cooling on shrinkage, it was found that the cooling water temperature has a significant effect on the shrinkage of ultra-fine light guide parts, and the holding condition also has a significant effect.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.1
• /
• pp.31-42
• /
• 2013

This research sheds light on the non-intrusive traits of mobile devices (Electronic Guidebook, Rememberer, I-Guides and eXspot) deployed in Exploratorium for enhancing visitor experience via case studies. In an interactive exhibition environment, non-intrusiveness was the key to supporting the immersive experience and meaning-making for visitors. The usability of hand-held devices directly impacted on the non-intrusiveness, thereby reshaping the form-factors of mobile devices. The change in from-factor has also minimized the functions of devices as the remember of museum experience. Furthermore, the role of mobile devices, which turned from a supposed multi-media guide to a mere rememberer, made them virtually impossible for realizing the "seamless visiting model" originally planned. An array of projects carried out in Exploration have achieved some degree of success such as increasing viewing time as well as reinforcing post-visit activities. However, taken from musicological perspective, increase in viewing time is by all means insufficient to be taken as proof since it is assumed to be achieved by photo-taking (i.e. MyExploratorium) rather than by interacting between visitors and exhibits. This issue --increased viewing time -- needs to be analyzed in depth. All in all, mobile devices used in Exploratorium can be defined as a learning tool/educational supporting medium based on personalization for (visitors') optimizing extended museum experience.

• Architectural research
• /
• v.18 no.1
• /
• pp.21-29
• /
• 2016

Importance of FM has rapidly increased because of its growing business. However, due to lack of clarity and identity of FM in professional areas, standardization of FM became to be imperative in such a rapidly changing global business environment. Facility services are defined as the provision of support the primary activities of an organization, delivered by an internal or external provider. Majority of FM activities are services related to 'space and infrastructure' and 'people and organization' (CEN, 2011). The purpose of this study is to investigate definitions and characteristics of FM from both globally and domestic environment, by comparison with international or national standards, to identify quality management in FM and service characteristics of FM, to investigate the differences in service level elaboration in FM, and to suggest standard issues of quality management in FM service quality. This study examines contents of the European Standards in FM, Part 3 'Guidance on quality in Facility Management, especially for the process of QM standardized by CEN (2011) and explores undefined issues such as service level, measurement metrics according to service characteristics of FM. The European FM Standard guides the common process of QM in terms of requirements specification, service level elaboration, measurement metrics development although it does not specifically address various service levels, specific performance metrics and indicators.

• Child Health Nursing Research
• /
• v.23 no.3
• /
• pp.279-291
• /
• 2017

Purpose: The aim of this study was to explore how characteristics of ADHD children affect social support for mothers, parenting stress, parenting sense of competence, coping, and quality of life. The conceptual model was based on the Lazarus and Folkman's stress-evaluation-coping theory. Methods: Data were collected 208 mothers of children with ADHD. Data were analysed using SPSS 18.0 and AMOS 18.0 programs. Results: The proposed model was good fit for the data based on the model fit indices. Parenting stress, parenting sense of competence and coping directly affected quality of life but characteristics of the children and social support had only an indirect effect. The explanatory power of these variables was 52.1%. Conclusion: The results of this study indicate that nursing strategies to increase social support for mothers with ADHD children, lowers parenting stress, improves parenting sense of competence, and guides the parents to choose appropriate coping. In particular, as social support has the strongest influence on the quality of life, it is necessary to develop nursing intervention programs that utilize social support for parents with ADHD children.

• Geomechanics and Engineering
• /
• v.14 no.6
• /
• pp.563-570
• /
• 2018

Ballast layer has an important role in vertical stiffness and stability of railway track. In most of the Middle East countries and some of the Asian ones, significant parts of railway lines pass through desert areas where the track (particularly ballast layer) is contaminated with sands. Despite considerable number of derailments reported in the sand contaminated tracks, there is a lack of sufficient studies on the influences of sand contamination on the ballast vertical stiffness as the main indicator of track stability. Addressing this limitation, the effects of sand contamination on the mechanical behavior of ballast were experimentally investigated. For this purpose, laboratory tests (plate load test) on ballast samples with different levels of sand contamination were carried out. The results obtained were analyzed leading to derive mathematical expressions for the strain modulus ($E_V$) as a function of the ballast level of contamination. The $E_V$ was used as an index for evaluation of the load-deformation characteristics and bearing capacity of track substructure. The critical limit of sand contamination, after which the $E_V$ of the ballast reduces drastically, was obtained. It was shown that the obtained research results improve the current track maintenance approach by providing key guides for the optimization of ballast maintenance planning (the timing of ballast cleaning or renewal).

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.140-154
• /
• 1992

The objective of the research stated here was aimed at providing the information needed to establish the Korean Seismic Design Code Recommendations and Guides for precast concrete (P.C) large panel apartment buildings. This was accomplished by investigation and analysis of the response of P.C large panel structures subjected to shaking table excitation simulating earthquake ground motion. one of the test specimens used was 1/3-scaled 3-story box P.C model provided by Sam-Hwan Camus Corporation. The 4m $\times$4m shaking table was used to simulate the earthquake ground motion. the employed input accelerogram was the one recorded as Taft N21E component and the peak ground acceleration(PGA) was scaled depending on the desired level of seismic severity and the time according to dynamic similitude rule. Based on results obtained from shaking table test of this P.C model, the following conclusions were drawn . (1) As far as test specimen is concerned, the seismic safety factors turns out to be 7~8. (2)P.C model has damping ratio of about8% which is twice larger than in-situ R.C. structure. And (3)this model has global displacement ductility ratio of 2~3 through the energy dissipation by opening and sliding of joints.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.265-275
• /
• 2011

As BIM is now being accepted and broadly expanded in the building industry, the demand for developing, managing, submitting, and checking the BIM models has increased. To meet this demand, it is necessary to develop and spread BIM guidelines, standards, and manuals. Meanwhile, as the number of public construction projects increases, the importance of quantifying the BIM quality checking and evaluation also grows. This study aims to enhance our understanding of the definition and characteristics of BIM quality management, and review the current situation of BIM standards worldwide. In particular, by focusing on BIM quality control and its relevant subjects, the minimum standards for BIM quality management are suggested.

• The Korean Journal of Community Living Science
• /
• v.15 no.3
• /
• pp.97-106
• /
• 2004

This study was carried out to offer basic research data to increase rural housewife's clothing management ability and to guide their behaviors clothing- related reasonably. For this purpose, the interview-investigation by the questionnaire was conducted as the samples of 500 housewives under 60 at 8 villages located in Seoul, Gwangju and Daegu and 8 villages located in some rural communities we randomly extracted. This questionnaire was made up the standardized measuring scales of clothing management behaviors and related variables. As a result, in a part of storage and disposal the rural housewife got 3.68 and 3.16, whereas the urban housewife got 3.59 and 3.03, respectively, indicating a significant difference, which meant that the rural housewife managed those of clothing better than the urban housewife. Generally, rural wives were better in doings in the part of management, storage, disposal, than urban wives. They, however, knew the knowledge of clothing less than urban wives, evaluated the importance of clothing lower and applied clothing-related mass media to their life lower. Therefore, the rural wives need educational guides and materials for improving of the clothing behaviors because they are older and lower education lever than urban wives and they have a little information, too.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.548-553
• /
• 2001

Recently, much attention is imposed on the design of the fuel assemblies in the Pressurized Light Water Reactor (PWR). Spacer grid is one of the main structural components in a fuel assembly. It supports fuel rods, guides cooling water and protects the system from the external impact loads. Various space grids have been proposed and new designs are also being created. In this research, a new spacer grid is designed by the axiomatic approach. The Independence Axiom is utilized for the design. For conceptual design, functional requirements (FRs) are defined and corresponding design parameters (DPs) are found to satisfy FRs in sequence. Overall configuration and shapes are determined in this process. Detail design is carried out based on the result of the axiomatic design. For the detail design, the system performances are evaluated by using linear and nonlinear finite element analysis. The dimensions are determined by optimization. Some commercial codes are utilized for the analysis and design.

• Journal of the Korean housing association
• /
• v.16 no.3
• /
• pp.27-35
• /
• 2005

The purpose of this study is to minimize physical obstacles for handicapped students in university dormitories. To carry out this study, we have surveyed 10 Universities in Korea. First we have studied the law and the theory of architectural planning and design guides those are related with handicapped people. And it was surveyed the existing state of the dormitories facilities and made a checklist. And the satisfaction about the facilities was questioned to the handicapped students who used those buildings. It is concluded that most of the universities which we have surveyed were equipped with good facilities for the general students but don't have regards for handicapped people at that time. As the result of the rate of the satisfaction, they are satisfied those facilities generally. As you can see the result of this research, the facilities in University are not very good for handicapped people in many points. So that kind of many facilities must be taken into consideration for handicapped people in the stage of architectural programming in the process of designing the dormitory building.