• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.4
• /
• pp.155-189
• /
• 2003

In this research, the comprehensive evaluation model of IS(information systems) for public sectors is theoretically constructed through reviewing and integrating previous IS evaluation-related research. This model is hypothesized to consist of five sectors(System Sector, User Sector, Organization and Management Sector, Resource Management Sector and Strategic Contribution Sector), ten evaluation items belonging to these five evaluation sectors, and sixty two evaluation indices for these ten evaluation items. The results of empirical analyses to test the validity of the research model show that the evaluation sectors turn out to be the same ones as proposed in the hypothetical model. The evaluation items(System Quality, Information Quality, Service Quality) in System Sector proves to be consistent with the hypothetical model. However, in case of User Sector, two evaluation items(Perceived Usefulness and User Satisfaction) which are included in the hypothetical model are found to be merged into one item(User Satisfaction). And, it is shown that four evaluation items such as the Efficiency of Internal Process, Customer Satisfaction, Organizational Innovation, and the Degree of Informatization competence improvement are included in Organization and Management Sector, differently from the research model in which the items, Organizational innovation and the Degree of Informatization competence improvement, are not divided. As a final result, sixty two evaluation indices that comprise all the evaluation items belonging to five sectors are found to be reduced to fifty seven ones through factor analyses, criterion-related validity tests and reliability analyses.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.102-110
• /
• 2023

The MATS(Missile Assembly Test Set) is manufactured and used to check the function of the missile during the period of development for the guided missile system, and the requirements for power and communication are managed for equipment production. The MATS developer implements software according to the proposed communication standard to guarantee the reliability of the data that communicates with the guided missile. The test bed is built and self-performance evaluation is performed after implementation. And the verification process is performed using the standard equipment. The characteristics of periodic delay for data transmission must be reflected when building a test bed. This paper describes a test bed construction method for data processing with periodic delay. Also This paper compares and evaluates the performance by changing the previously designed algorithm.

• Fashion & Textile Research Journal
• /
• v.21 no.6
• /
• pp.776-788
• /
• 2019

This study developed an ergonomic Korean female military winter jacket and (inner and outer) pattern in in order to increase dimension and operational suitability for military missions. First we developed the 1st development pattern and sample jackets with improved dimensions and operational suitability based on a previous investigation of fitness and motion suitability of Korean female military winter jackets (inner and outer) and motion suitability by a wearing test. The evaluation result of fitness for the 1st development pattern were over 4.0 (5.0 Likert scale) for both the inner and outer jacket, a positive result and the result of motion suitability were over 3.5 in both the inner and outer jacket except for the neck front part by collar height. However, we did not modify the collar height because decreases in warmth and military regulations. We also evaluated appearance by experts that showed good results in both the inner and outer jacket. Finally, we developed a final pattern based on evaluation results and military regulations. Existing military uniform research was conducted mainly on male soldiers. Beginning with this study, we expect to expand research on the development of military uniform patterns suitable for a female soldier body type.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.6
• /
• pp.471-481
• /
• 2005

In Korea, generic drug and bioequivalence test are the hot issues since a new medical system of separation of dispensary from medical practice was started in 2000. The KFDA(Korea FDA) had revised several times ${\ulcorner}Guidance\;for\;bioequivalence\;test{\lrcorner}$. In vitro dissolution test has been extensively used as a quality control tool for solid oral dosage forms. In an effort to minimize unnecessary human testing, in vitro/in vivo correlations (IVIVC) between in vitro dissolution and in vivo bioavailability are increasingly becoming an integral part on extended release drug product development. The recently published US guidance, ${\ulcorner}Extended\;release\;oral\;dosage\;forms\;:\;development,\;evaluation,\;and\;application\;of\;in\;vitro/in\;vivo\;correlations{\lrcorner}$ will be helpful for us to make our own guideline.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.548-552
• /
• 2003

In the braking system, the friction force is the most important factor of the design. For long time, many researchers have been strived for getting the exact friction coefficients. But the friction coefficients are affected by the road condition and changed by lots of parameters, such as normal force and characteristics between two contacted materials, temperature, etc. For the development of ABS of the aircraft, HILS(Hardware-In-the-Loop-Simulation) test and dynamometer test was carried out. For the calculation of the friction coefficients, the wheel moments were measured using the load cell mounted on the housing of the wheel. The test conditions were dry and greasy, as the 0.7 and 0.4 in friction coefficient, respectively. In this paper, the test results of the friction coefficients were represented and the improvement method was suggested.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.3-4
• /
• 2015

Environmental load reduction and sustainable development one of the study's research into the available material is discharged, remove the coarse aggregate and fine aggregate from waste concrete and utilizing the remaining cement fine powder as an alternative raw material for limestone is the main raw material of cement developing playback cement that was the purpose. Physical over existing research and chemical quality was confirmed was evaluated for durability by promoting carbonation test, research studies on the durability evaluation insignificant. As honipyul within the aggregate differential lung fine powder increases carbonation resistance performance've found that increased sharply and, S0 showed fairly similar to the OPC. Therefore, the development within the technology research to separate fine aggregate discharge fully differential and waste fine powder is determined to be the development and use of the playback durability of the cement with the carbonation levels corresponding to the OPC if made.

• Journal of Drive and Control
• /
• v.16 no.3
• /
• pp.33-41
• /
• 2019

This study presents the development of a lifetime test bench for the strain wave reducer which is a precision gear reducer of the robot to realize fault diagnosis and failure prognostics. To this end, the lifetime test bench was designed to detect the vertical forward/reverse direction rotation load. Through the lifetime test bench, it is possible to apply the same load spectrum from robot working scenarios. We developed a data integration gateway for fault data collection. Through the development of dedicated software for fault diagnosis and failure prognostics, these data from vibration, noise and temperature sensors were collected and analyzed along with the operation of the lifetime evaluation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1777-1783
• /
• 2013

This study aims to implement an instrumentation system measuring and analysing real-time data of information flow between respective subunits composing train control system as the performance evaluation method for wireless communication based urban railway train control system under development for a Korean model. It analyses system functional requirements regarding subsystems composing wireless communication based train control system and test items for functions presented in each specification and examines data and measurement point for measuring according to test items in order to implement an instrumentation system. And, it clearly defines requirements of an instrumentation system to avoid malfunction or error in operation of train control system. It reviews data processing method and display method for effective analysis of data flow between respective subunits with measured data, designs and makes an instrumentation system. Ultimately, it applies to a performance test of train control system and makes sure an instrumentation system in normal working order.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.91-101
• /
• 2023

Modeling and Simulation(M&S) technology has been widely used to solve constraints such as time, space, safety, and cost when we implement the same development and test environments as real warfare environments to develop, test, and evaluate weapon systems for the last several decades. The integration and test environments employed for development and test & evaluation are required to provide Live Virtual Construction(LVC) simulation environments for carrying out requirement analysis, design, integration, test and verification. Additionally, they are needed to provide computing environments which are possible to reconfigure computing resources and software components easily according to test configuration changes, and to run legacy software components independently on specific hardware and software environments. In this paper, an Integration Test and Simulation for Engagement Control(ITSEC) bed using a bare-metal virtualization mechanism is proposed to meet the above test and simulation requirements, and it is applied and implemented for an air missile defense system. The engagement simulation experiment results conducted on air and missile defense environments demonstrate that the proposed bed is a sufficiently cost-effective and feasible solution to reconfigure and expand application software and computing resources in accordance with various integration and test environments.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.49-65
• /
• 2004

The purpose of this study is development of posture evaluation and Range of Motion(ROM) system by using digital vision analysis method. The results of this study are as follows. First, Scoliosis evaluation through this research measurement system represent 3mm error in 7 cervical point and deepest lumbar point, 0.7mm error in other point. This mean this research measurement system have a reliability for scoliosis evaluation. Second, for spine line evaluation on high fat subject, we need reconstrection spine line after measurement for fat thickness in 7 cervical point and deepest lumbar point. Third, In pedioscope error test, it present 0.01848cm in X axis and 0.01757cm in Y axis. This results mean pedioscope have a reliability foot evaluation. Forth, Posture evaluation and Range of Motion measurement system by using digital vision analysis method can fast measure in range of motion and foot evaluation and posture. therefore we can expect this system application in young people posture clinic center and hospital and so on.