• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.219-224
• /
• 2001

Spectral phase interferometry for direct electric-field reconstruction (SPIDER) was fabricated and used to characterize pulses from a Ti:sapphire oscillator. In the SPIDER apparatus, two replicas of the input pulse were generated with a time delay of 200 fs and were upconverted by use of sum-frequency generation with a strongly chirped pulse using a 8-cm-long SFIO glass block at a 30-11m-thick type II BBO (p-BaBz04) crystal. The resulting interferogram was recorded with a UV-enhanced CCD array in the spectrometer. The spectral phase was retrieved by SPIDER algorithm in combination with independently measured pulse spectrum and the corresponding temporal intensity profile was reconstructed with a duration of 19 fs. As an independent cross-check of the accuracy of the method, we compared the interferometric autocorrelation (lAC) signal calculated from the SPIDER data with a separately measured lAC. The conventional, but unjustified, method of fitting a sechz pulse to the autocorrelation deceivingly yielded a pulse duration of 15 fs. This systematic underestimation of the pulse duration affirms the need for a complete characterization method. From the consideration in this paper, we concluded that the SPIDER could provide an accurate characterization of femtosecond pulses. ulses.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.43-52
• /
• 2008

The paper presents the problem definition of video placement and efficient methods for placing video data on a cluster of video servers. The video placement is to place each of video replicas on one of the servers where the number and location of the servers are already determined. The rejection ratio of user requests is one of most important user-perceive performance measures, so it has been used as a performance criteria in many researches on the VOD system. The objective of our video placement is to achieve the load balancing among servers and the minimization of total network loads. To our experiment, the presented methods show better performance in terms of the rejection ratio of user requests than the methods for video placements in which only either server load balancing or network load minimization is considered. Also, it is observed that considerations on server load balancing is especially important in video placement. To our survey, little research has been published on video placement in which server and network load are considered together in a video server cluster environment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.179-182
• /
• 2004

The $p-CdIn_2Te_4$ single crystal was grown in the three-stage vertical electric furnace by using Bridgman method. The quality of the grown crystal has been investigated by the x-ray diffraction and the photoluminescence measurements. From the Photoluminescence spectra of the as-grown $CdIn_2Te_4$ crystal and the various heat-treated crystals, the $(D^{o},X)$ emission was found to be the dominant intensity in the photoluminescence spectrum of the $CdIn_2Te_4:Cd$, while the $(A^{o},X)$ emission completely disappeared in the $CdIn_2Te_4:Cd$. However, the $(A^{o},X)$ emission in the photoluminescence spectrum of the $CdIn_2Te_4:Te$ was the dominant intensity like an as-grown $p-CdIn_2Te_4$ crystal. These results indicated that the $(D^{o},X)$ is associated with $V_{Te}$ acted as donor and that the $(A^{o},X)$ emission is related to $V_{Cd}$ acted as acceptor, respectively. The $p-CdIn_2Te_4$ crystal was found to be obviously converted into the n-type after annealing in the Cd atmosphere. The origin of $(D^{o},\;A^{o})$ emission and its TO Phonon replicas is related to the interaction between donors such as $V_{Te}$ or $Cd_{int}$, and accepters such as $V_{Cd}$ or $Te_{int}$. Also, the In in the $CdIn_2Te_4$ was confirmed not to form the native defects because it existed in the stable form of bonds.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.202-214
• /
• 2010

This paper presents plans to develop cultural archetype into a cultural industry. Though, various types of cultural products are being developed, they're not very popular to consumers and has very limited market. Reason for that is, most of these products are simple replicas of cultural assets or they are focused solely on restoring the traditions without considering trend. This study was focused on patterns found on the relics from mausoleum of king Mooryung of Baek-je. Main focus was the meaning of important patterns as generalized representation of traditional and emotional value. In addition, the study was done with the idea that developing the design of cultural products should be presented in modern style while carrying the traditional value and the story telling elements. The order of developing the design should be, first, forming process based on its original form and the elements, and developing a design motive based on the story the pattern is carrying. Then develop sample products with the motive.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.5
• /
• pp.187-195
• /
• 2008

In MANET, it is important to efficiently manage data objects and traffic to improve network throughput and response time. This paper proposes a connection-degree based data object search and replication scheme in mobile ad-hoc networks. In this method, information about the path data object providers is stored at the cache of a cluster header at which lots of queries arrive, so that, to reduce the load of the cluster header, replicas can be created at its neighboring nodes. The method proposes an algorithm that picks up a cluster header among mobile nodes and makes it possible to search for and utilize adaptive and up-to-date information in MANET. The method is expected to be effective since it enables access to data objects in spite of broken links among mobile nodes with an enhancement in network response time of searching and a decrease in communication costs. The efficiency of this system was verified via simulation.

• The korean journal of orthodontics
• /
• v.45 no.5
• /
• pp.217-225
• /
• 2015

Objective: Three-dimensional (3D) printing is a recent technological development that may play a significant role in orthodontic diagnosis and treatment. It can be used to fabricate skull models or study models, as well as to make replica teeth in autotransplantation or tooth impaction cases. The aim of this study was to evaluate the accuracy of fabrication of replica teeth made by two types of 3D printing technologies. Methods: Fifty extracted molar teeth were selected as samples. They were scanned to generate high-resolution 3D surface model stereolithography files. These files were converted into physical models using two types of 3D printing technologies: Fused deposition modeling (FDM) and PolyJet technology. All replica teeth were scanned and 3D images generated. Computer software compared the replica teeth to the original teeth with linear measurements, volumetric measurements, and mean deviation measurements with best-fit alignment. Paired t-tests were used to statistically analyze the measurements. Results: Most measurements of teeth formed using FDM tended to be slightly smaller, while those of the PolyJet replicas tended to be slightly larger, than those of the extracted teeth. Mean deviation measurements with best-fit alignment of FDM and PolyJet group were 0.047 mm and 0.038 mm, respectively. Although there were statistically significant differences, they were regarded as clinically insignificant. Conclusions: This study confirms that FDM and PolyJet technologies are accurate enough to be usable in orthodontic diagnosis and treatment.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.278-281
• /
• 2003

The p-CIn2Te4 single crystal was grown in the three-stage vertical electric furnace by using Bridgman method. The quality of the grown crystal has been investigated by the x-ray diffraction and the photoluminescence measurements. From the photoluminescence spectra of the as-grown CdIn2Te4 crystal and the various heat-treated crystals, the (Do, X) emission was found to be the dominant intensity in the photoluminescence spectrum of the CdIn2Te4:Cd, while the (Ao, X) emission completely disappeared in the CdIn2Te4:Cd. However, the (Ao, X) emission in the photoluminescence spectrum of the CdIn2Te4:Te was the dominant intensity like an as-grown CdIn2Te4 crystal. These results indicated that the (Do, X) is associated with VTe acted as donor and that the (Ao, X) emission is related to VCd acted as acceptor, respectively. The p-CdIn2Te4 crystal was found to be obviously converted into the n-type after annealing in the Cd atmosphere. The origin of (Do, Ao) emission and its TO phonon replicas is related to the interaction between donors such as VTe or Cdint, and accepters such as VCd or Teint. Also, the In in the CdIn2Te4 was confirmed not to form the native defects because it existed in the stable form of bonds.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.4
• /
• pp.449-456
• /
• 1999

본 논문은 C++에 분산 객체 프로그래밍 기능을 추가한 D++ 언어를 제안한다. 대등관계 복제객체 모델을 지원하는 D++는 분산 클래스의 정의, 멤버 함수의 일치성 제어 정의 기능, 그리고 영구 객체 이름에 기반한 분산 객체를 정의할 수 있는 언어 구조를 제공한다. D++ 프로그램에서 새로이 생성되는 분산 객체는 생성 시에 제공되는 객체의 영구 이름과 동일한 영구 이름을 갖는 분산 객체가 존재할 경우 해당 객체들과 복제 관계를 유지함으로써 정보를 공유한다. 각 복제 객체들은 서로 간에 대등한 관계를 가지며, 멤버 함수 정의 시에 기술되는 특성에 따라 일치성이 유지된다. 이 같은 D++의 분산 객체 모델은 실시간 그룹웨어의 기본 요구 사항인 분산 환경에서의 정보 공유 및 사건 공지 기능을 자연스럽게 해결해 주기 때문에 실시간 그룹웨어의 개발을 효율적으로 지원할 수 있을 것으로 기대한다. Abstract This paper proposes D++ programming language that is an extension of C++ for distributed object oriented programming. The D++, which supports peer-to-peer object model, provides new language constructs for the definition of distributed classes, the definition of the consistency control of the member function and the definition of distributed object variables with the persistent name. In D++, when the persistent name of a newly created distributed object is same as that of an existing distributed object, the new distributed object replicates object state of the existing distributed object and thus they share the object state. The replicas have peer relation and the consistency among them is maintained according to the characteristic described on the definition of designated member functions. It is expected that D++ language increases efficiency in development of real-time groupware because the distributed object model of D++ naturally supports the information sharing and event notification that are the basic functions required when building real-time groupware.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.3
• /
• pp.401-409
• /
• 2009

The shape of crotch area is very important to develop functional clothing as well as other ergonomic goods such as chair or saddle etc. However, it is inevitable that 3D scanned image of crotch would have missing part due to its folded shape including overlapping legs nearby. Therefore, the objectives of this research was to compare reconstruction methods of missing parts at crotch using seven dummies of real men's replicas. Two reconstruction methods adopted were kinds of 'fill- hole' in Rapidform 2004, one was 'smooth' and the other was 'curvature'. Each restored image was compared with the original shape of the dummies. As results, the average distance was 0.66mm between original and 'smooth' treated images and 0.59mm between original and 'curvature' treated, which was not statistically different. Average area of restored crotch region was $8740.04cm^2$ by 'smooth' method and $8405.02cm^2$ by 'curvature' method which is close to the original area of $8413.76cm^2$. Statistical difference was found between images of original and 'smooth' ones$(p=0.04^*)$. However, there was no difference between original and 'curvature' treated images, which indicates that 'curvature' method is more useful to fill the hole compared with 'smooth' method.

• Journal of Sensor Science and Technology
• /
• v.15 no.6
• /
• pp.379-385
• /
• 2006

Single crystal of p-$CdIn_{2}Te_{4}$ was grown in a three-stage vertical electric furnace by using Bridgman method. The quality of the grown crystal has been investigated by x-ray diffraction and photoluminescence measurements. From the photoluminescence spectra of the as-grown $CdIn_{2}Te_{4}$ crystal and the various heat-treated crystals, the ($D^{o}$, X) emission was found to be the dominant intensity in the photoluminescence spectrum of the $CdIn_{2}Te_{4}$:Cd, while the ($A^{o}$, X) emission completely disappeared in the $CdIn_{2}Te_{4}$:Cd. However, the ($A^{o}$, X) emission in the photoluminescence spectrum of the $CdIn_{2}Te_{4}$:Te was the dominant intensity like in the as-grown $CdIn_{2}Te_{4}$ crystal. These results indicated that the ($D^{o}$, X) is associated with $V_{Te}$ which acted as donor and that the ($A^{o}$, X) emission is related to $V_{Cd}$ which acted as acceptor, respectively. The p-$CdIn_{2}Te_{4}$ crystal was obviously found to be converted into n-type after annealing in Cd atmosphere. The origin of ($D^{o},{\;}A^{o}$) emission and its to phonon replicas is related to the interaction between donors such as $V_{Te}$ or $Cd_{int}$, and acceptors such as $V_{Cd}$ or $Te_{int}$. Also, the In in the $CdIn_{2}Te_{4}$ was confirmed not to form the native defects because it existed in a stable bonding form.