• Journal of Chest Surgery
• /
• 제33권8호
• /
• pp.676-680
• /
• 2000

To minimize the period of brain ischemia and the potential for neurologic damage during aortic arch replacement, we used the arch-first technique. First case was a 28-year-old female with extensive aneurysm involving ascending, arch and descending thoracic aorta. Exposure was obtained via a bilateral via a bilateral thoracotomy (clamshell incision) in the anterior 4th right and 3rd left intercostal space with oblique sternotomy. To prepare for arch perfusion, the side-arm graft(10mm) was anastomosed to the aortic graft, opposite the site of the planned anastomosis to the arch vessels. After completing the arch anastomosis under total circulatory arrest(37min) and retrograde cerebral perfusion(12min), aortic graft was clamped on either side and the arch was perfused via side-arm graft for 36min. When distal aortic anastomosis was finished, distal clamp of aortic graft was released and arch vessels were perfused via common femoral artery, and the proximal aortic anastomosis was accomplished. The patient was discharged with no event. Second case was a 48-year-old male with extensive aneurysm involving ascending, arch, and aortic regurgitaiton(grade III/IV). This case was also done using the clamshell incision. Aortic valve replacement was done by valved-conduit(Vascutek 30mm), both coronary artery anastomosis using Cabrol's procedure. Last operation procedure was the same as the 1st case.

• Journal of Korean Biological Nursing Science
• /
• 제10권1호
• /
• pp.80-87
• /
• 2008

Purpose: Hypoestrogenism caused by ovariectomy, disease, or menopause is associated with increased obesity in women. Altered fat distribution and weight gain are consequences of menopausal hypoestrogenism, but the mechanisms responsible are not completely known. This study examined the effect of estrogen on obesity in ovariectomized rats. Method: The groups of female rats were 4 weeks post ovariectomy (OVX) or, 4 weeks post-sham operation (SHAM), and 2 weeks post ovariectomy followed by 2 weeks replacement with estradiol benzoate (ER-$16{\mu}g$/kg, subq, qd). Serum ghrelin level was measured by radioimmunoassay (RIA). The expression of adrenergic receptors in adipose tissue was measured by Western blotting assay. Result: OVX significantly increased body weight, serum cholesterol. Two weeks estrogen replacement reduced body weight accompanied by the increment of serum ghrelin and the reduction of the receptor ratio of adrenergic ${\alpha}_{2A}/{\beta}_1$, and ${\alpha}_{2A}/{\beta}_3$. Conclusion: We provide evidence that estrogen reduces obesity through the altered receptor ratio of adrenergic ${\alpha}_{2A}/{\beta}_1$, and ${\alpha}_{2A}/{\beta}_3$ in adipose tissue in ovariectomized rats.

• Structural Engineering and Mechanics
• /
• 제66권1호
• /
• pp.37-43
• /
• 2018

In orthopedic surgery and in particular in total hip arthroplasty, the implant fixation is carried out using a surgical cement called polymethylmethacrylat (PMMA). This cement has to insure a good adhesion between implant and bone and a good load distribution to the bone. By its fragile nature, the cement can easily break when it is subjected to a high stress gradient by presenting a craze zone in the vicinity of inclusion. The focus of this study is to analyze the effect of inclusion in some zone of cement in which the loading condition can lead to the crack opening leading to their propagation and consequently the aseptic loosening of the THR. In this study, the fracture behavior of the bone cement including a strange body (bone remain) from which the onset of a crack is supposed. The effect of loading condition, the geometry, the presence of both crack and inclusion on the stress distribution and the fracture behavior of the cement. Results show that the highest stresses are located around the sharp tip of bony inclusion. Most critical cracks are located in the middle of the cement mantle when they are subjected to one leg standing state loading during walking.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.51-60
• /
• 2016

PURPOSES : The applicability of the mechanics-based similarity concept (suggested by Feng et al.) for determining scaled variables, including length and load, via laboratory-scale tests and discrete element analysis, was evaluated. METHODS: Several studies on the similarity concept were reviewed. The exact scaling approach, a similarity concept described by Feng, was applied in order to determine an analytical solution of a free-falling ball. This solution can be considered one of the simplest conditions for discrete element analysis. RESULTS : The results revealed that 1) the exact scaling approach can be used to determine the scale of variables in laboratory tests and numerical analysis, 2) applying only a scale factor, via the exact scaling approach, is inadequate for the error-free replacement of small particles by large ones during discrete element analysis, 3) the level of continuity of flowable materials such as SCC and cement mortar seems to be an important criterion for evaluating the applicability of the similarity concept, and 4) additional conditions, such as the kinetics of particle, contact model, and geometry, must be taken into consideration to achieve the maximum radius of replacement particles during discrete element analysis. CONCLUSIONS : The concept of similarity is a convenient tool to evaluate the correspondence of scaled laboratory test or numerical analysis to physical condition. However, to achieve excellent correspondence, additional factors, such as the kinetics of particles, contact model, and geometry, must be taken into consideration.

• 통합자연과학논문집
• /
• 제6권4호
• /
• pp.193-196
• /
• 2013

Haemoglobin is an interesting physiologically significant protein composed of specific functional prosthetic haem and globin moieties. In recent decades, there has been substantial interest in attempting to understand the structural basis and functional diversity of avian haemoglobins (Hbs). Towards this end, purification, crystallization, preliminary X-ray diffraction and molecular-replacement studies have been carried out on Amaurornis phoenicurus Hb. Crystals were grown by the hanging drop vapor-diffusion method using PEG 2000 and NaCl as precipitants. The crystals belonged to the primitive monoclinic system $P2_1$, with unit-cell parameters $a=65.33{\AA}$, $b=93.14{\AA}$, $c=98.54{\AA}$, ${\beta}=100.48^{\circ}$; a complete data set was collected to a resolution of $2.6{\AA}$. The Matthews coefficient of $2.30{\AA}^3Da^{-1}$ for the crystal indicated the presence of two ${\alpha}_2{\beta}_2$ tetramers in the asymmetric unit.

• 한국토양비료학회지
• /
• 제50권6호
• /
• pp.615-622
• /
• 2017

This study was conducted to evaluate the odor reduction efficacy of the dip injection wet scrubber (DIWS) using tap water as washing fluid. The $NH_3$ and $H_2S$ removal efficiency of 7 day batch operated DIWS was evaluated twice over a total of 14 days of experiment. The $NH_3$ removal efficiency ranged from 26 to 37%. The $H_2S$ removal efficiency was between 22 and 30%. The pH of the washing fluid maintained below 8 and the $NH_4{^+}$ concentration tended to keep constant around 350 ppm after 5 days of washing-fluid replacement. Therefore, the 5-day washing fluid replacement interval is more preferable than the 7-day interval. The $NH_4{^+}$ concentration and the electrical conductivity (EC) showed a high correlation. The EC measurement can be used as an alternative to conventional $NH_4{^+}$ concentration measurement method for real time monitoring of washing fluid condition.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.246-253
• /
• 2019

This study was conducted to explore the optimum proportion of zeolite and zeolite-kaolin as additives to cement clinker and gypsum samples, while maintaining the strength properties of produced environmentally sustainable cements. According to the British standard method, zeolite was added to cement clinker in proportions of 5-12% and 10-12% by weight, respectively, in the preparation of samples of zeolite-containing cement and zeolite-kaolin-based cement. Kaolin was used as a second additive as 10-20% of the total weight. The compressive strength tests were performed on base cement samples according to a standard procedure given in ASTM C109 Compressive Strength of Hydraulic Cement. These values were compared with those of the reference sample and the Omani allowable limits. The results indicated that the best compressive strength values were obtained with 88% cement clinker, 5% gypsum, and 7% zeolite for the zeolite-containing cement. Quantities of 70% cement clinker, 5% gypsum, 10% zeolite, and 15% kaolin gave the best results for zeolite-kaolin-based cement, resulting in a substitution of than 25% cement clinker. The study concluded that the partial cement clinker replacement using zeolite/kaolin combination may have a great influence on the reduction of $CO_2$ emission and energy saving in cement manufacturing.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.199-207
• /
• 2020

Recently, as the demand for masks increases, the use of filter-replaceable cotton masks is increasing. A filter-replaceable cotton mask is one of the ways to solve the environmental problems of a disposable nonwoven mask because only the filter can be replaced after washing. Cotton fiber products are known to be environmentally friendly, but cotton products dyed with general synthetic dyes are not safe for humans. In this study, to prepare of cotton mask applied with natural dyeing, the optimal dyeing conditions are set when dyeing with gallnut extract. A polychromatic natural dye that changes color by mordant, and the functionalities of gallnut dyeing fabrics are evaluated. The experimental method is dyed the gallnut by temperature and time by concentration to set the optimal conditions. The color fastness rating grade of aluminium potassium sulfate dodecahydrate, copper(ll) sulfate pentahydrate, and iron(ll) chloride tetrahydrate were evaluated after the pre/post mordanting.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.8-13
• /
• 2021

Excavators are construction machines used for digging soil, transporting soil, dismantling buildings and clearing the ground at construction sites. There are various attachments attached to the arm end of the excavator and used for various operations. There are the most common types of buckets attached for excavation and other types of attachments used for foresting, road cleaning, snow removal, and waste disposal. When multiple types of work are done at the same time, several attachments must be replaced and a device called a quick coupler is used to reduce replacement time. Although a quick coupler reduces the replacement time of the Attachment, it is necessary to attach safety devices to prevent unintentional detachment of attached attachments during the operation. To prevent the attachment from leaving or falling regardless of the operator's intention, support is installed in the hook of the bucket pin and controlled through a separate hydraulic cylinder to ensure safety. When attaching an attachment, it shall be attached without any action. This study is intended to verify the design validity of safety devices to prevent falls of attachments occurring at construction sites.

• 한국프랜차이즈경영연구
• /
• 제6권1호
• /
• pp.1-20
• /
• 2015

Home Meal Replacement (HMR) products are ready-to-eat or pre-cooked food products that are consumed at daily home. HMR market has grown rapidly due to societal changes: increases in female social activities, silver population, and one-person households. Consumption channels of HMR can be classified into take-out, delivery, and retail. In Korean HMR market, retail sector is largely growing, but companies are focusing their business on the home delivery sector. Moreover, franchise companies are expanding their areal coverage in the HMR market based on their multi-unit strategy. However, more research on the HMR market is needed as existing studies are limited in conceptualization, classification, and processed food from malls or home-shopping channels. Therefore, we conducted the efficiency analysis on Gukseonsaeng, one of franchises that applied the take-out channel, using DEA method. According to the research on 29 franchisees of Gukseonsaeng, 77.9% of input appeared inefficient for technical efficiency, while 53.3% of input appeared inefficient for scale efficiency. Thus, we found that franchises of Gukseonsaeng are structured in increasing returns to scale (IRS), so enhancing efficiency by expanding scales need to be implemented.