• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.828-835
• /
• 2006

Spacer grid springs support the fuel rods in a nuclear fuel system. The spacer grid is a part of a fuel assembly. Since a spring has repeated contacts with the fuel rod, fretting wear occurs on the surface of the spring. Design is usually performed to reduce the wear. The conceptual design process for the spring is defined by using the Independence of axiomatic design and the design is carried out based on the direction that the design matrix indicates. For detailed design an optimization problem is formulated. In optimization, homologous design is employed to reduce fretting wear. The deformation of a structure is called homologous if a given geometrical relationship holds for a given number of structural points before, during, and after the deformation. In this case, the deformed shape of the spring should be the same as that of the fuel rod. 1bis condition is transformed to a function and considered as a constraint in the optimization process. The objective function is minimizing the maximum stress to allow a local plastic deformation. Optimization results show that the contact occurs in a wide range. Also, the results are verified by nonlinear finite element analysis.

• Textile Coloration and Finishing
• /
• v.10 no.4
• /
• pp.1-6
• /
• 1998

It is important in the durable water and oil repellent finishing for wool fabric what kinds of water-repellent agents will be used. Water repellent agents and its concentration were aleady chosen in the previous paper, one of the crosslinking agents which has less damages(harsh handle or yellowing) to the treated fabrics was a low molecular weight urethane-based resins(eg. Elastron BN-11). In repellent finishing, fabrics were padded in a bath which contained aqueous solution of water-repellent agents, and crosslinking agents, and wetting agents, followed by drying and curing. The most suitable treating condition for excellent repellency and durability to dry-cleaning was as follows ： Fabrics are padded at liquor pick-up ratio of 50%, with aqueous solution which contained $30g/\ell$ of water-repellent agents, and $1g/\ell$ of crosslinking agents, and 40g/s of wetting agents. And the padded fabrics were dried at $110^\circ{C}$ for 1 minute, and cured at $160^\circ{C}$ for 1 minute. For the fabrics, water and oil repellencies and durability to repeated dry-cleanings were observed. For enhancing the durability to dry-cleaning, the role of crosslinking agents was important for they bonds water-repellent agents and fibers to 3-dimensional net structure. Therefore, the most suitable drying and curing conditions should be selected according to the kinds of crosslinking agents.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.231-238
• /
• 2001

To investigate the underground structure of shallow water, Han-river near Yangsou-Ri, high resolution hydroacoustic measurements were carried out for the engineering design of railroad bridge. The acoustic source was a Boomer with an energy of 90 to 280J and in a frequency range up to about 16KHz. The reflected signals were received by using both traditional hydrophones(passive element) and a specially devised receiver unit(active element) mainly composed of piezofilms and preamplifier. They are connected to the "SUMMIT" data acquisition system(DMT-GeoTec company), where the sampling interval was set to 1/32㎳. The source position was continuously monitored by a precision DGPS system whose positioning accuracy was on the order of loom. For the quality control purposes, two different source-receiver geometries were taken. That is to say, the measurements were repeated along the profile everytime depending on the different source energy(175J, 280J), the receiving elements(passive, active) and two different source-receiver geometries. It was shown that the data resolution derived from a proper arrangement with the active hydrophone could be greatly enhanced and hence the corresponding profile section caused by the regular data processing system "FOCUS" accounted excellently for the underground formation below the shallow water.w the shallow water.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.71-73
• /
• 2005

Ferroelectric PZT heterolayered thick films were fabricated by the alkoxide-based sol-gel method. PZT(20/80) and PZT(80/20) paste were made and alternately screen-printed on the alumina substrates. The coating and drying procedure was repeated 4 times to form the heterolayered thick films. The thickness of the PZT heterolayered thick films was approximately 60 mm. All PZT thick films showed the typical XRD patterns of a perovskite polycrystalline structure. The relative dielectric constant and the dielectric loss of the PZT thick films sintered at $1050^{\circ}C$ were 1382 and 1.90%, respectively. The remanent polarization and coercive field of the PZT thick films sintered at $1050^{\circ}C$ were $14.15{\mu}C/cm^2$ and 19.13kV/cm, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.12
• /
• pp.1822-1830
• /
• 2002

The microsatellites are the short tandem repeats of 1 to 6 bp long monomer sequences that are repeated several times. These short tandem repeats are considered to be generated by the slipped strand mispairing. Based on the unique capability of alternating purine-pyrimidine residues to form Z-DNA, the possible role of the microsatellites in gene regulation has been proposed. The microsatellites are highly polymorphic, follow Mendelian inheritance and are evenly distributed throughout the genomes of eukaryotes. They are easy to isolate and the polymerase chain reaction based typing of the alleles can be readily automated. These properties make them the preferred markers for comparison of the genetic structure of the closely related breeds/populations; very high-resolution genetic mapping and parentage testing etc. The microsatellites have rapidly replaced the restriction fragment length polymorphism (RFLP) and the random amplified polymorphic DNA (RAPD) in most applications in the population genetics studies in most species, including the various farm animals viz. cattle, buffalo, goat, sheep and pigs etc. More and more reports are now available describing the use of microsatellites in pigs ranging from measurement of genetic variation between breeds/populations, developing high resolution genetic maps to identifying and mapping genes of biological and economic importance.

• Journal of Distribution Science
• /
• v.16 no.2
• /
• pp.25-33
• /
• 2018

Purpose - This study focused on the effect of counter-factual thinking on post-purchase behavior producing consumer regret at HMR selection and purchase. We have analyzed the factors that HMR production and distribution businesses should consider because distribution and marketing strategy reflecting consumers' demand. Research design, data, and methodology - For the purpose of carrying out this research, we conducted a direst structured questionnaire to students at 'J' college. A total of 237 valid questionnaires were collected for students and their parents at 'J' university. For the hypothesis test, exploratory factor analysis, t-test, regression and structure equation path analysis were performed. Results - The consumers who often resented HMR purchase did counter-factual thinking on post-purchase behavior were likely to do switching purchases. Counter-factual thinking on post-purchase behavior had a negative influence upon consumer's satisfaction with HMR safety and marketing characteristics. Conclusions - Consumers who had been satisfied to a certain degree might have cognitive dissonance of minor mistakes of HMR product were likely to have downward counter-factual thinking through contrast effects. Therefore, HMR producer and distribution businesses that had production, distribution and marketing strategy to satisfy consumers by raw material, freshness and safety were likely to switch to another product at one time mistake of selection, purchase and use.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.1E
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.

• Korean Journal of Biological Psychiatry
• /
• v.8 no.2
• /
• pp.246-250
• /
• 2001

The dopamine D4 receptor gene has a hypervariable segment in the coding region characterized by a varying number of 48bp repeats in exon III of the gene. Varying the numbers of repeated segments may change the length, structure, and function of the receptor, which makes this gene a possible candidate for variations in dopamine-related behaviors, such as alcoholism and drug abuse. We evaluated the dopamine D4 receptor genotype in male alcoholics and normal controls. All alcoholics and controls were unrelated and from the Korean population. Genotype and allele frequencies in 67 alcoholics were compared to 67 controls who were free of alcohol abuse, substance abuse, and major mental illness. No association was found between the dopamine D4 receptor allele and alcoholism. This result indicate that there is no association of the dopamine D4 receptor with alcoholism in Korean. Further systemized investigation to determine the role of dopamine D4 receptor gene in alcoholism with a larger sample size will be required.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.370-373
• /
• 2003

As the integrated circuit device shrinks to the smaller dimension, the chemical mechanical polishing (CMP) process was required for the global planarization of inter-metal dielectric(IMD) layer with free-defect. However, as the IMD layer gets thinner, micro-scratches are becoming as major defects. Chemical-Mechanical Planarization(CMP) of conductors is a key process in Damascene patterning of advanced interconnect structure. The effect of alternative commerical slurries pads, and post-CMP cleaning alternatives are discuess, with removal rate, scratch dentisty, surface roughness, dishing, erosion and particulate density used as performance metrics. Electroplated copper depostion is a mature process from a historical point of view, but a very young process from a CMP persperspective. While copper electrodepostion has been used and stuidied for dacades, its application to Cu damascene wafer processing is only now ganing complete accptance in the semiconductor industry. The polishing mechanism of Cu CMP process has been reported as the repeated process of passive layer formation by oxidizer and abrasion action by slurry abrasives. however it is important to understand the effect of oxidizer on copper pasivation layer in order to obtain higher removal rate and non-uniformity during Cu-CMP process. In this paper, we investigated the effects of oxidizer on Cu-CMP process regarding the additional volume of oxidizer.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.918-920
• /
• 1999

Recently, the ceramics of high permittivity are applied to DRAM and FRAM. In this study, (Ba, Sr)$TiO_3$ (BST) ceramics thin films were prepared by Sol-Gel method. BST solution was made and spin-coated on Pt/$SiO_2$/Si substrate at 4000[rpm] for 10 seconds. Coating process was repeated 3 times and then sintered at $750[^{\circ}C]$ for 30 minutes. Each specimen was analyzed structure and electrical characteristics. Thickness of BST ceramics thin films are about $2000[\AA]$. Dielectric constant and loss of thin films was little decreased at $1[kHz]{\sim}1[MHz]$. Dielectric constant and loss to frequency were 250 and 0.02 in BST3. In accordance with applied voltage, property of leakage current was stability when the was $0{\sim}3$[V]. According to voltage, leakage current was increased exponentially at $4{\sim}7$[V].