• Title/Summary/Keyword: Repeated Structure

Search Result 609, Processing Time 0.032 seconds

Simulation of Thermal Trip in Mill Driver (과부하 운전 압연용 전동기의 과열 정지 시뮬레이션)

  • Lee SeungHee;Han Muho;Lee Wangha;Lee Chiwan
    • Proceedings of the KIPE Conference
    • /
    • 2001.07a
    • /
    • pp.288-291
    • /
    • 2001
  • In steel plant, load torque of mill driver motor is changed periodically because working state and idle state are repeated and load current of working state is necessarily higher than rated motor current. The over current limiter is one of the basic thermal protection method from over heating. In this paper, we analyzed the structure of over current limiter for motor and motor driver systems, developed over current limiter with same operation and structured warning system of action of over current limiter. As using this warning system, we can avoid abrupt plant stop by over current limiter in mill driver and lessen producing loss by plant stop. The developed warning system of action of over current limiter is exactly inspected by computer simulation md analysis of acquired data.

  • PDF

Optimal Process Design of Super Junction MOSFET (Super Juction MOSFET의 공정 설계 최적화에 관한 연구)

  • Kang, Ey Goo
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.27 no.8
    • /
    • pp.501-504
    • /
    • 2014
  • This paper was developed and described core-process to implement low on resistance which was the most important characteristics of SJ (super junction) MOSFET. Firstly, using process-simulation, SJ MOSFET optimal structure was set and developed its process flow chart by repeated simulation. Following process flow, gate level process was performed. And source and drain level process was similar to genral planar MOSFET, so the process was the same as the general planar MOSFET. And then to develop deep trench process which was main process of the whole process, after finishing photo mask process, we developed deep trench process. We expected that developed process was necessary to develop SJ MOSFET for automobile semiconductor.

A Study on Traffic Distribution Processing using the Round Robin Monitoring System

  • Kim Seok-Soo
    • Journal of information and communication convergence engineering
    • /
    • v.3 no.2
    • /
    • pp.90-92
    • /
    • 2005
  • As the result of the study shows, Round Robin Algorithm allows servers to ensure definite traffic distribution, unless incoming data loads differ much. Although error levels are high in some cases, they were eventually alleviated by repeated tests for a long period of time. The study uses two software packages (Packet Capture and Round Robin Test Package) to check packet volume from Virtual Network Structure (data generator, virtual server, Server 1, 2, 3), and finds out traffic distribution toward Server 1, 2, and 3. The functions of implemented Round Robin Load Balancing Monitoring System include round robin testing, system monitoring, and graphical indication of data transmission and packet volume.

Hydrography and Currents in the Southeastern Sea of Korea, October 1982 (한국 동남해역의 해양현상에 관한 연구)

  • Kim, Ku;Min, Byeong-Eon
    • Journal of the Korean Institute of Navigation
    • /
    • v.8 no.1
    • /
    • pp.49-70
    • /
    • 1984
  • Spatial and temporal variations of hydrography and currents are investigated in the Southeastern Sea of Korea during October 1982. The distribution of the water mass of high salinity (>34.40${\textperthousand}$) and low dissolved oxygen concentration (<5.0ml/l) indicates that the Tsushima current flows northward as it passes the Western Channel of the Korea Strait. The cold water (<$6.0^{\circ}c$) with low salinity (<$34.20{\textperthousand}$) and high dissolved oxygen concentration (>6.0ml/l) reaches the bottom of the western channel of the Korea Strait after flowing southward leaning against the slope rather than following the deepest part of the Channel. Repeated sections in the Korea Strait show a remarkable change of hydrographic structure over a period of 4 days ; both warn and cold waters are intensified, particularly in the eastern part of the strait toward the Tsushima Island.

  • PDF

Fabrication and Properties of OLEDs using PECCP Langmuir-Blodgett(LB) Films (PECCP LB 박막을 이용한 유기 발광 타이모드의 제작과 이의 특성)

  • Lee, Ho-Sik;Lee, Won-Jae;Park, Myung-Gyu;Songe, Min-Jeng;Park, Jong-Wook
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2000.07a
    • /
    • pp.831-834
    • /
    • 2000
  • Characteristics of organic light-emitting diodes(OLEDs) were studied with devices made by PECCP[poly(3,6-N-2-ethylhexyl carbazolyl cyanoterephthalidene)] Langmuir-Blodget(LB) films. The emissive organic material was synthesized and named PECCP, which has a strong electron donor group and an electron accepter group in main chain repeated unit. The LB technique was employed to investigate the identification of the recombination zone in the ITO/PECCP LB films/Alq$_3$/Al structure by varying the LB film thickness. PECCP was considered as an emissive layer and Alq$_3$was used as an electron-transport layer. We measured current-voltage(I-V) characteristics, UV/visible absorption, PL spectrum, and EL spectrum of those devises.

  • PDF

Evaluation of Lightweight Soil as a Subgrade Material (경량혼합토의 도로 노상층 재료 사용 가능성 평가)

  • Park, Dae-Wook;Vo, Viet Hai
    • International Journal of Highway Engineering
    • /
    • v.15 no.5
    • /
    • pp.57-64
    • /
    • 2013
  • PURPOSES : It is to evaluate lightweight soil as a subgrade material based on mechanical tests and calculation of pavement performance. METHODS : In this research, various contents of cement and air foam are used to make lightweight soil using wasted dredged soil. Uniaxial compressive strength test is conducted to evaluate strength of 7 and 28 day cured specimens. Secant modulus was calculated based on the stress and strain relationship of uniaxial compressive strength test. Resilient modulus test was measured using by repeated triaxial compression test. The measured resilient modulus was used in layered elastic program to predict fatigue and rutting life at a given pavement structure. RESULTS : Uniaxial compressive strength increases as cement content increases but decrease as air foam content increases. Resilient modulus also increases as cement content increases and decrease as air foam content decrease. CONCLUSIONS : It is concluded that dredge clay soil can be used as subgrade layer material using by lightweight treated soil method.

Dynamic linear mixed models with ARMA covariance matrix

  • Han, Eun-Jeong;Lee, Keunbaik
    • Communications for Statistical Applications and Methods
    • /
    • v.23 no.6
    • /
    • pp.575-585
    • /
    • 2016
  • Longitudinal studies repeatedly measure outcomes over time. Therefore, repeated measurements are serially correlated from same subject (within-subject variation) and there is also variation between subjects (between-subject variation). The serial correlation and the between-subject variation must be taken into account to make proper inference on covariate effects (Diggle et al., 2002). However, estimation of the covariance matrix is challenging because of many parameters and positive definiteness of the matrix. To overcome these limitations, we propose autoregressive moving average Cholesky decomposition (ARMACD) for the linear mixed models. The ARMACD allows a class of flexible, nonstationary, and heteroscedastic models that exploits the structure allowed by combining the AR and MA modeling of the random effects covariance matrix. We analyze a real dataset to illustrate our proposed methods.

A Study on Implementation of Automobile Control Software Testing Process Based on TMMi (TMMi 기반 자동차 제어 SW 테스팅 프로세스 구축에 관한 연구)

  • Jang, Jin-Wook
    • Journal of Information Technology Services
    • /
    • v.8 no.3
    • /
    • pp.159-169
    • /
    • 2009
  • The issue of method of software testing process implementation has recently been in the spotlight in korea and some vendor make every effort to improve the software testing process through the evaluation of TMMi. The level of software process is at initial level, nevertheless, so the high quality of software is not guaranteed. This paper apply to the TMMi Level2 Assessment criteria of Automobile control software testing process. The test policy and strategy, test planning, test monitoring and control, test design and execution, test environment goal. The result need to emerge development process connection on the test policy and strategy process, test planning process etc. Also, the study analyzed the infra structure to reach the repeated level via key process area. As the result the process implementation in organization suggests the policy development and the implementation activity. Finally, the practical can refer to this paper in order to implementation the software testing process.

13-Hydroxy-9Z,11E,15E-octadecatrienoic Acid from the Leaves of Cucurbita moschata

  • Bang, Myun-Ho;Han, Jae-Taek;Kim, Hae-Yeong;Park, Young-Doo;Park, Chang-Ho;Lee, Kang-Ro;Baek, Nam-In
    • Archives of Pharmacal Research
    • /
    • v.25 no.4
    • /
    • pp.438-440
    • /
    • 2002
  • A new unsaturated hydroxy fatty acid was isolated from the leaves of Cucurbita moschata through repeated silica gel column chromatography and chemical methods. The structure of the new fatty acid was determined as 13-hydroxy-9, 11, 15-octadecatrienoic acid on the basis of several spectral data including 2D-NMR. The stererostructures of double bonds were determined to be 9Z, 11 E and 15E by coupling patterns of related proton signals in the $^1H-NMR$ and NOESY experiments.

NEGACYCLIC CODES OF LENGTH 8ps OVER Fpm + uFpm

  • Klin-eam, Chakkrid;Phuto, Jirayu
    • Bulletin of the Korean Mathematical Society
    • /
    • v.56 no.6
    • /
    • pp.1385-1422
    • /
    • 2019
  • Let p be an odd prime. The algebraic structure of all negacyclic codes of length $8_{p^s}$ over the finite commutative chain ring ${\mathbb{F}}_{p^m}+u{\mathbb{F}}_{p^m}$ where $u^2=0$ is studied in this paper. Moreover, we classify all negacyclic codes of length $8_{p^s}$ over ${\mathbb{F}}_{p^m}+u{\mathbb{F}}_{p^m}$ into 5 cases, i.e., $p^m{\equiv}1$ (mod 16), $p^m{\equiv}3$, 11 (mod 16), $p^m{\equiv}5$, 13 (mod 16), $p^m{\equiv}7$, 15 (mod 16) and $p^m{\equiv}9$ (mod 16). From that, the structures of dual and some self-dual negacyclic codes and number of codewords of negacyclic codes are obtained.