• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.219-226
• /
• 2011

Recently, study of functional clothing for vital sensing is focused on improving conductivity and decreasing resistance, in order to enhance the electrocardiogram(ECG) sensing accuracy and obtained stable environmental durability on operation condition. In this study, four ECG fabrics that having different componnt yarns and weaving structures were produced to analyze their environmental durabilities and electric properties under general operation conditions including different physical and chemical stimulation. For outstanding electric properties and physical properties, the optimized ECG sensing fabric should consist of a fabric of 2 up 3 down twill structure containing 210de silver-coated conductive yarns and polyester yarn in warp and weft directions respectively. The selected fabric has $0.11{\Omega}$ which is relative lower resistance than otherwisely produced fabrics under ECG measurement condition. And it has 7% stable resistance changes under 25% strain and repeated strain.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1512-1519
• /
• 2002

Most of mechanical failures are caused by repeated loadings and therefore they are strongly related to fatigue. To avoid the failures caused by fatigue, determination of an optimal shape of a structure is one of the very important factors in the initial design stage. Shape optimization fer two types of specimens, which are very typical ones in opening mode in fracture mechanics, was accomplished by the linear elastic fracture mechanics and the growth-strain method in this study. Also shape optimization for a cantilever beam in mixed mode was carried out by the same techniques. The linear elastic fracture mechanics was used to estimate stress intensity factors and fatigue lives. And the growth-strain method was used to optimize the shape of the initial shape of the specimens. From the results of the shape optimization, it was found that shapes of two types of specimens and a cantilever beam optimized by the growth-strain method prolong their fatigue lives significantly. Therefore, it was verified that the growth-strain method is an appropriate technique for shape optimization of a structure having a crack.

• Archives of Pharmacal Research
• /
• v.15 no.1
• /
• pp.52-57
• /
• 1992

The molecular structure of a natural compound was determined by single crystal X-ray diffraction analysis. The compound was isolated by methanol extraction and repeated chromatography from the stem of Paulownia tomentosa. Yellow prismatic crystals of the compound, which were recrystallized from tetrahydrofuran, are triclinic, with a = 7.310 (6), b = 10.753(6), c = 11.586(5) ${\AA}.\;\alpha= 93.30(6),\;\beta=105.62(10),\;\gamma=109.49(7)^\circ,\;D_x=1.514,\;D_m=1.51 g/cm^3$, space group P1 and Z = 2. The structure was solved by direct method, and refined by least-squares procedure to the final R-value of 0.032 for 1271 independent reflections $(F\le3\sigma{(F))}$. The compound is one of new furanquinone analogue. The molecule has a nearly planar conformation with an intramolecular hydrogen bond. In the crystal, the planar molecules are arranged as a prallel sheet-like pattern, and these stackings are stabilized by the O-H...O type intermolecular hydrogen bonds. The other intermolecular contacts appear to be the normal van der Waals interactions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.6
• /
• pp.601-608
• /
• 2011

This paper presents the damage assessment of a building structure by using a novel optical fiber accelerometer system. Especially, a sub-scaled building model is designed and manufactured to check up the feasibility of the optical fiber accelerometer for structural health monitoring. The novel accelerometer exploits the moir$\acute{e}$ fringe optical phenomenon and two pairs of optical fibers to measure the displacement with a high accuracy, and furthermore a pendulum to convert the displacement into acceleration. A prototype of optical fiber accelerometer system has been successfully developed that consists of a sensor head, a control unit and a signal processing unit. The building model is also designed as a 4-story building with a rectangular shape of $200{\times}300$ mm of edges. Each floor is connected to the next ones by 6 steel columns which are threaded rods. Basically, a random vibration test of the building model is done with a shaker and all of acceleration data is successfully measured at the assigned points by the optical fiber accelerometer. The experiments are repeated in the undamaged state and the damaged state. The comparison of dynamic parameters including the natural frequencies and the eigenvectors is successfully carried out. Finally, the optical fiber accelerometer is proven to be prospective to evaluate dynamic characteristics of a building structure for the damage assessment.

• Structural Monitoring and Maintenance
• /
• v.2 no.4
• /
• pp.399-418
• /
• 2015

Automated damage detection through Structural Health Monitoring (SHM) techniques has become an active area of research in the bridge engineering community but widespread implementation on in-service infrastructure still presents some challenges. In the meantime, visual inspection remains as the most common method for condition assessment even though collected information is highly subjective and certain types of damage can be overlooked by the inspector. In this article, a Frequency Response Functions-based model updating algorithm is evaluated using experimentally collected data from the University of Central Florida (UCF)-Benchmark Structure. A protocol for measurement selection and a regularization technique are presented in this work in order to provide the most well-conditioned model updating scenario for the target structure. The proposed technique is composed of two main stages. First, the initial finite element model (FEM) is calibrated through model updating so that it captures the dynamic signature of the UCF Benchmark Structure in its healthy condition. Second, based upon collected data from the damaged condition, the updating process is repeated on the baseline (healthy) FEM. The difference between the updated parameters from subsequent stages revealed both location and extent of damage in a "blind" scenario, without any previous information about type and location of damage.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.525-537
• /
• 2017

This paper explores different vibration control strategies for the cancellation of human-induced vibration on a structure with time-varying modal parameters. The main motivation of this study is a lively urban stress-ribbon footbridge (Pedro $G\acute{o}mez$ Bosque, Valladolid, Spain) that, after a whole-year monitoring, several natural frequencies within the band of interest (normal paring frequency range) have been tracked. The most perceptible vibration mode of the structure at approximately 1.8 Hz changes up to 20%. In order to find a solution for this real case, this paper takes the annual modal parameter estimates (approx. 14000 estimations) of this mode and designs three control strategies: a) a tuned mass damper (TMD) tuned to the most-repeated modal properties of the aforementioned mode, b) two semi-active TMD strategies, one with an on-off control law for the TMD damping, and other with frequency and damping tuned by updating the damper force. All strategies have been carefully compared considering two structure models: a) only the aforementioned mode and b) all the other tracked modes. The results have been compared considering human-induced vibrations and have helped the authors on making a decision of the most advisable strategy to be practically implemented.

• Macromolecular Research
• /
• v.14 no.3
• /
• pp.359-364
• /
• 2006

Di-block copolymers composed of two biocompatible polymers, poly(ethylene glycol) and poly(D,L-lactide), were synthesized by ring-opening polymerization for preparing polymer vesicles (polymersomes). Emulsion solvent evaporation method was used to fabricate the polymersomes. Scanning electron microscope (SEM) images confirmed that polymersomes have a hollow structure inside. Confocal laser microscope and optical microscope were also used to verify the hollow structure of polymersomes. Polymersomes having various sizes from several hundred nanometers to a few micrometers were fabricated. The size of the polymersomes could be readily controlled by altering the relative hydrodynamic volume fraction ratio between hydrophilic and hydrophobic blocks in the copolymer structure, and by varying the fabrication methods. They showed greatly enhanced stability with increased molecular weight of PEG. They maintained their physical and chemical structural integrities after repeated cycles of centrifugation/re-dispersion, and even after treatment with surfactants.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.583-590
• /
• 2015

Automobile crash optimization is nonlinear dynamic response structural optimization that uses highly nonlinear crash analysis in the time domain. The equivalent static loads (ESLs) method has been proposed to solve such problems. The ESLs are the static load sets generating the same displacement field as that of nonlinear dynamic analysis. Linear static response structural optimization is employed with the ESLs as multiple loading conditions. Nonlinear dynamic analysis and linear static structural optimization are repeated until the convergence criteria are satisfied. Nonlinear dynamic crash analysis for frontal analysis may not have boundary conditions, but boundary conditions are required in linear static response optimization. This study proposes a method to use the inertia relief method to overcome the mismatch. An optimization problem is formulated for the design of an automobile frontal structure and solved by the proposed method.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.46-58
• /
• 2016

Architecture and Fashion mutually affects the shape and appearance of the other as an art of space according to the hybrid trends. Therefore, the purpose of this study is to find the correlations between the characteristics of traditional architecture types in Southeast Asia and modern fashion. Firstly, characteristics of the types obtained through the theoretical consideration of Southeast Asian architectural tradition include vertical, symmetrical, geometrical, epeated and continual structure. On the basis of these characteristics analyzed from 2013's S/S to 2015's F/W collection of Alexander McQueen, Gareth Pugh, Victor & Rolf, designers with strong creative and experimental minds who juxtaposed designs of two opposing points as well as hybrids since 2000, the following formativeness exists. First, the vertical structure of high floor is represented as a straight silhouette, a color contrast, vertical cut or wrinkle. Hence, it impresses verticality, rhythm, etc. Second, symmetrical structure of the gable roof is represented as a trapezoidal shape starting from the shoulder line or neck line widened into sleeves, impressing symmetry, dynamism, etc. Third, the geometry of the assembled is represented as vertical and horizontal bands or pattern pieces like puzzle, impressing geometry, three-dimensional, etc. Fourth, repeated structure of the weaving pattern is represented as repetitive patterns of woven fabric or printing techniques. Thus, it impresses repeatability, harmony, etc. And lastly, continuous group structure is represented as a connection of collars or hem-lines, as well as a crossing of fabric that impresses continuity, liquidity, etc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.169-178
• /
• 2007

In this paper, we propose a signal structure and its optimum receiver to improve performance of SC-FDE(Single Carrier with Frequency Domain Equalization) system. Conventional SC-FDE systems have a drawback of power unbalance in frequency domain due to generation of pilot signals in time domain. The unbalanced power in frequency domain induces a channel estimation error and the performance of the receiver is degraded significantly. To overcome the drawback we apply CAZAC sequence which has constant power distribution in time and frequency domain. We design the signal structure to improve the performance with the repeated CAZAC sequence, and we design a receiver to optimize the proposed structure. Computer simulation results show that the proposed structure is superior to the conventional structure considering frame synchronization, frequency synchronization and channel equalization on typical wireless mobile channel environment.