• Journal of the Korea Institute of Building Construction
• /
• v.13 no.3
• /
• pp.209-217
• /
• 2013

The execution of a construction project involves the engagement of many participants. Generally, the Authority uses CM to certify that the Work is built according to the contract documents. The CM work scope is expressed in the Construction Technology Management Act and its Regulation. The mandated and delegated CM services are limited to the construction period. If Contractor is required to repair a construction defect, the Contractor should bear the burden of the inspection service for the defect repair, because it is associated with him. Nevertheless, CM should submit a bond to provide the inspection and supervision service for the defect repair. These may result in conflict with each liability. Therefore, CM service in the law and regulation was investigated and analyzed in this study to classify the characteristics of CM contracts, and it was suggested that the CM liability for the inspection and supervision service for the defect repair should be reconsidered.

• Laser Solutions
• /
• v.15 no.1
• /
• pp.6-9
• /
• 2012

In TFT-LCD manufacturing process, various defects are generated by manufacturing machine trouble or particle. These defects can be repaired through the TFT-Laser repair process that only can't be automated in TFT-LCD manufacturing Process. In this Paper, we propose auto defect algorithm for TFT-LCD laser repair machine using image processing algorithm in order to automate process. Proposed algorithm can detect very small defects (< 2um) in 98% success ratio, and generated laser repair path guarantee highly precise position accuracy. Through proposed system, much of the work still done the old-fashioned way, by hand, can be automated and manufacturing company can be strengthed the competitiveness of cost.

• Clinics in Shoulder and Elbow
• /
• v.7 no.2
• /
• pp.70-75
• /
• 2004

Purpose: To evaluate the results of arthroscopic repair of traumatic anterior shoulder instability with glenoid bone defect. Materials and Methods: Nineteen patients who had underwent arthroscopic repair for the shoulder with traumatic anterior instability and glenoid bone defect were retrospectively reviewed. Mean age was 24.6 years(range, 20 to 39) and mean follow-up was 23 months(range, 19 to 55). No glenoid bone defect was greater than 7mm in length and 20% of the glenoid. The results were evaluated according to stability, range of motion and function. Results: All patients obtained excellent-good results according to Rowe scoring system. Two patients(10.5%) had instability. The mean loss of external rotation was 15 degrees (range, 0 to 25). Functionally, 17 patients could participate in preinjured work or sports to the same level with or without mild discomfort. The remained 2 patients who had 25 degree loss of external rotation could not play sports. Conclusion: Though arthroscopic repair is a good treatment for traumatic anterior shoulder instability with small glenoid bone defect, it is possible to cause loss of external rotation

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.5
• /
• pp.467-474
• /
• 2021

A study on optimal shape selection of a mechanical fastening for the repair of crack defect of ROK Air Force F-5 fighter wing was conducted. The crack defect occurred in the spar of the wing, and the technical manual does not specify the repair method. However, ROK Air Force decided to develop a repair technology for this defect in consideration of various logistic conditions. Three repair shapes for the proper repair were devised and the finite element analysis was performed to examine the structural safety of these three connection members. As a result of the structural safety review, two connection members except one were structurally safe with safety margins over zero because the calculated stress values were at or below the yield strength level. Therefore, two connection members were determined to be able to use for repair under the condition that the aircraft operated within the design limit load. The results of this study would be very useful if the same defect occurs in long-term aircraft operated by the ROK Air Force.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.23-33
• /
• 2022

Cracks, which account for the largest proportion of defect lawsuits in apartment buildings, are not clear on the criteria for defect determination, so judgments about defects are mixed. Interlayer cracks, which account for most of the crack defect judgment amount, tend to be judged as defects regardless of the crack width or condition, and repair methods are mostly set uniformly. This starts from the problem that the standards of the Ministry of Land, Infrastructure and Transport and the Construction Appraisal Practice, which the courts use as standards, do not match. It is necessary to establish a defect determination standard that can be applied to all stakeholders through the amendment of laws and the revision of the Court Appraisal Practice. In addition, it is necessary to apply the crack repair method according to the width and condition of the interlayer crack. If the defect determination and the application of the repair method for cracks are rationalized, it could serve as an opportunity to change the current trend of defect disputes that rely only on litigation.

• Journal of Chest Surgery
• /
• v.20 no.4
• /
• pp.760-764
• /
• 1987

Fifty seven patients underwent repair of a partial atrioventricular septal defect from January 1980 to December 1986. The ostium primum atrial septal defect was closed with autologous or bovine pericardium. The cleft in the anterior mitral leaflet was present in 53 cases, absent in 4 cases. Of the 53 cases with a cleft in the anterior mitral leaflet, 48 received suture repair of the cleft, 3 received mitral valve replacement. There was no hospital death and all the patients were followed-up for a mean period of 26.4 months. Four required permanent pacemaker implantation due to complete heart block, and one of them died of sudden malfunction of pacemaker. Two received reoperation due to significant residual mitral insufficiency. Suture repair of the cleft in the anterior mitral leaflet resulted in significant decrease in degree of mitral regurgitation. During follow-up period 49 patients were in NYHA class I, 7 patients were in NYHA class II. This report suggests that excellent result can be achieved from repair of the partial atrioventricular septal defect by managing the left A-V valve as a bileaflet structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.286-289
• /
• 2007

We have developed an automated circuit defect inspection and repair method that can be used to improve the yield ratio of TFT-LCD. The method focuses on correcting resist patterns after the development process to ensure shape regularity. We built a prototype system and confirmed that the method is valid.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.202-205
• /
• 2009

An automated circuit repair system was developed for enhancing the yield of nondefective liquid crystal panels, focusing on the resist patterns on the circuit material layer of thin-film transistor (TFT) substrates prior to etching. The developed system has an advantage over the parallel conventional system: In the former, the repair conditions depend on the type of resist whereas in the latter, the repair parameters must be fine-tuned for each circuit material. The developed system consists of a resist pattern defect inspection system and a pattern repair system for short and open defects. The repair system performs fine corrections of abnormal areas of the resist pattern. The open-repair system is equipped with a syringe to dispense resist. To maintain a stable resist diameter, a thermal insulator was installed in the syringe system. As a result, the diameter of the dispensed resist became much more stable than when no thermal insulator was used. The resist diameter was kept within the target of $400{\pm}100{\mu}m$. Furthermore, a prototype system was constructed, and using a dummy pattern, it was confirmed that the system worked automatically and correctly.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2002.05a
• /
• pp.151-155
• /
• 2002

Memory의 공정기간은 2∼3개월 정도, 공정은 수백가지에 이를 정도로 많기에 defect은 존재할 수밖에 없다. 많은 defect이 있다면 어쩔 수 없겠지만 적은 defect이 발생한 경우에는 해당 die를 reject시키는 것보다는 repair해서 사용하는 것이 memory생산 업체 입장에서는 보다 효율적이고 원가 절감 차원에서 필수적이다. 이와 같은 이유로 laser repair라는 공정이 필요하고 laser repair공정의 정확한 target을 설정하기 위해 redundancy analysis가 필요하게 되었다. 지금까지 redundancy analysis는 장비 개발 업체에서 제공하는 경우가 대부분 이었고 각 장비 제조 업체별로 redundancy analysis algorithm을 개발하여 제공하여왔기에 동일한 defect 유형에 분석하는 redundancy analysis time이 각 장비 업체 별로 다른 경우가 대부분이었다. 이에 본 연구에서는 기존의 redundancy analysis algorithm의 개념에서 벗어나 defect 유형별로 simulation한 후 redundancy analysis를 진행함으로써 redundancy analysis에 소요되는 시간을 절약함으로써 원가 경쟁력 강화를 하고 correlation 개념을 업무에 적용하는데 목적이 있다

• Journal of Chest Surgery
• /
• v.7 no.1
• /
• pp.101-108
• /
• 1974

Repair of incomplete endocardial cushion defect was accomplished in two cases in September 1973 in this department. In each case a low atrial septal defect and a cleft of mitral septal cusp were found. Interrupted suture repair on the cleft mitral cusp and closure of the atrial septal defect with dacron patch were done successfully. Rigg-Kyvsgaard bubble oxygynator and Sigma motor were utilized for extracorporeal circulation. Follow up study, six months after discharge, revealed satisfactory results.