• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.107-112
• /
• 2009

Renewable energy resources will be an increasingly important part of power generation in the new millennium. Besides assisting in the reduction of the emission of greenhouse gases, they add the much needed flexibility to the energy resource mix by decreasing the dependence on fossil fuels. Due to their modular characteristics, ease of installation and because they can be located closer to the user, PV system have great potential as distributed power source to the utilities. In this paper, a dc-de power converter scheme with the push-pull based technology is proposed to apply for solar power system which has many features such as high efficiency, stable output, and low acoustic noises, DC-DC converter is used in proposed topology has stable efficiency curve at all load range and very high efficiency characteristics. This paper presents the design of a single-phase photovoltaic inverter model and the simulation of its performance.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.563-564
• /
• 2015

Recently, distributed generation using renewable energy resources have increased due to the limitation of conventional energy. To utilize these energy source effectively, a method of applying the energy storage system(ESS) in distribution system has been considered. In this paper, we simulated the one line-to-ground fault in power system with ESS. Based on these simulations, we analyzed the effect on Over Current Relay(OCR) operation. As a result, ESS operation modes result fault current fluctuation. Thus, OCR need to reset the pick up current. This paper analyze effect of ESS in distribution system according to OCR setting by using ElectroMagnetic Transient Program(EMTP).

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1634-1641
• /
• 2018

This study focuses on a high-performance direct active and reactive power controller design that is successfully applicable to three-phase pulse width modulation (PWM) AC/DC converters used in renewable distributed energy generation systems. The proposed controller can overcome the sluggish transient dynamic response of conventional controllers to rapid power command changes. Desired active and reactive powers can be thoroughly obtained at the end of each PWM period through a deadbeat solution. The proposed controller achieves an exact nonlinear cross-coupling decoupling of system power without using a predefined switching table or bang/bang hysteresis control. A graphical and analytical analysis that naturally leads to a control voltage vector selection is provided to confirm the finding. The proposed control strategy is evaluated on a 3 kW PWM AC/DC converter in the simulation and experiment.

• Journal of Power Electronics
• /
• v.19 no.5
• /
• pp.1142-1152
• /
• 2019

This paper presents a control method for reducing the current distortion in an indirect matrix converter (IMC) operating in boost mode under unbalanced input conditions. IMCs operating in boost mode are useful in distributed generation (DG) systems. They are connected with renewable energy systems (RESs) and the grid to transmit the power generated by the RES. However, under unbalanced voltage conditions of the RES, which is connected with the input stage of the IMC operating in boost mode, the input-output currents are distorted. In particular, the output current distortions cause a ripple of the power, which is transferred to the grid. This aggravates the reliability and stability of the DG system. Therefore, in this paper, a control method using positive/negative sequence voltages and currents is proposed for reducing the current distortion of both side in IMCs operating in boost mode. Simulation and experimental results have been presented to validate effectiveness of the proposed control method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.229-234
• /
• 2008

Korea Electric Power Corporation (KEPCO) has started the nation's first biogas-microturbine project in the city of Gongju as an effort to encourage the utilization of wasted biogas containing useful energy source in the form of $CH_4$. The goal of the project is to set up the biogas microturbine co-generation system for utilizing biogas as an energy source and improving the economics of the wastewater treatment plant. Wastewater treatment processes were investigated in depth to find improvement possibility. Changes in internal recirculation ratio and pre-treatment degree are needed to optimize plant operation and biogas production. Biogas pre-treatment system satisfies Capstone's fuel condition requirement with the test result of 99.9% and 90.2% of hydrogen sulphide and ammonia is removal performance. Installation of microturbine and manufacture of heat exchanger to warm anaerobic digester has been done successfully. Expected economic profit produced by the system is coming from energy saving including electricity 115,871kWh/year and heat contained in exhaust gas 579GJ/year.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.279-283
• /
• 2009

Distributed generation(DG) of combined cooling, heat. and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30% after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40%. If electricity energy and waste heat in turbine are used, 56% of heating energy and 67% of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.28-32
• /
• 2007

최근 대두되고 있는 에너지 문제와 더불어 대체에너지 개발 및 에너지의 이용효율을 높이려는 연구가 많이 이루어지고 있다. 수소에너지는 비 탄소계 연료로서 그 중요성에 대한 인식이 높아지고 있으며, 다양한 분야에서 수소에너지를 이용하기 위한 노력이 이루어지고 있다. 수소는 재순환이 가능하고, 환경에 미치는 영향이 적기 때문에 미래형 에너지원으로 각광을 받고 있다. 수소이용 기술 중 연료 전지는 에너지 변환효율이 높고 유해 배출물이 생성되지 않아 차세대 발전시스템으로 유망하지만 비용과 기술적 제약으로 단기간에 상용화하기에는 어려움이 있다. 따라서 저비용, 고효율의 수소에너지를 이용 할 수 있는 시스템 개발이 요구되고 있다. 리니어동력/발전시스템은 저비용으로 제작이 가능하고 기존 기술의 인프라를 활용할 수 있는 장정과, 크랭크 기구가 없기 때문에 얻어지는 변환손실, 열손실을 최소화 할 수 있는 효율의 장점 때문에 고효율의 수소 이용 기관으로 평가되고 있다. 본 연구에서는 수소이용 통력시스템의 직선운동을 전기적인 에너지로 변환 할 수 있는 고효율의 리니어 발전시스템 개발을 위해 Prototype의 평판형 및 원통형의 리니어발전기를 제작했고 각각의 성능에 대한 평가와 엔진과 발전기의 연계운전 결과를 비교하여 시스템 전체에 대한 성능예측을 했으며 연계운전을 통해 출력된 발전기의 출력파형을 PCS로 변환하여 정현파의 AC 출력을 얻었다.

• Advances in Energy Research
• /
• v.6 no.1
• /
• pp.55-73
• /
• 2019

The cost incurred by voltage sag effect in power networks has always been of important concern for discussions. Due to the environmental constraints, fossil fuel shortage crisis and low efficiency of conventional power plants, decentralized generation and renewable based DG have become trends in recent decades; because DGs can reduce the voltage sag effect in distribution networks noticeably; therefore, optimum allocation of DGs in order to maximize their effectiveness is highly important in order to maximize their effectiveness. In this paper, a new method is proposed for calculating the cost incurred by voltage sag effect in power networks. Thus, a new objective function is provided that comprehends technical standards as minimization of the cost incurred by voltage sag effect, active power losses and economic criterion as the installation and maintenance costs of DGs. Considering operational constraints of the system, the optimum allocation of DGs is a constrained optimization problem in which Lightning Attachment procedure optimization (LAPO) is used to resolve it and is the optimum number, size and location of DGs are determined in IEEE 33 bus test system and IEEE 34 bus test system. The results show that optimum allocation of DGs not only reduces the cost incurred by voltage sag effect, but also improves the other characteristics of the system.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.3054-3070
• /
• 2023

Nuclear Power Plants (NPP) are widely utilized around the globe from different base forms as it is one of the most dependable renewable resources that technological advancements have offered. However, different perceptions of the usage of NPPs emerged from different generations. The purpose of this study was to investigate the acceptance of nuclear energy as an alternative source of energy among Generation Z in the Philippines by utilizing an extended Theory of Planned Behavior (TPB) approach. An online questionnaire which consisted of 31 items was distributed using a purposive sampling approach and 450 respondents of Generation Z voluntarily answered. Structural Equation Modeling (SEM) showed that the knowledge regarding NPP had significant effects on risk perception and benefit perception which subsequently led to subjective norms. In addition, perceived behavioral control and subjective norms had significant effects on behavioral intention which led to nuclear acceptance. Interestingly, the respondents perceived the benefit of NPP as slightly higher than the perceived risk. With these, it was clear that the commissioning Nuclear Power Plant must consider as an alternative source of electric energy in the Philippines. Moreover, this study is one of the first studies that investigated the acceptance of NPP among Generation Z. Lastly, the model could be a basis to strengthen the acceptance strategy of opening NPP among Generation Z, particularly in developing countries.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.129-135
• /
• 2010

It is well known that distributed generation(DG) system using renewable energy is an alternative to solve the problems which result from the exhaustion of fossil fuel and the environmental pollution. A PWM inverter is required for a power flow control in the DG systems. This paper proposes a SRF power flow control method considering grid impedance in grid-connected single-phase inverter systems. The proposed SRF power flow control method can provide a voltage-reference for the single-phase inverter even without any grid impedance estimation so that the single-phase inverter system could operate in stand-alone mode and grid-connected mode based on the known nominal value of grid impedance. Also independent controls of active and reactive power are achieved by the proposed control method. The effectiveness and the validity of the proposed control method are demonstrated through simulations. The simulation results show that the proposed control method can control properly power flow in grid-connected single-phase inverter systems.