• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.690-690
• /
• 2003

The purpose of this study is to analyze the geological environment changes of tidal flat in the Hampyeong Bay. Especially, it centers on the changes in the sedimentary environment using remote sensing data. Multi-temporal Landsat data were used in this study. Remote sensing methods can be effectively applied for quantitative analysis of geological environment changes in tidal flat.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.1011-1014
• /
• 2006

Coarse resolution (9 - 50 km pixels) Sea Surface Temperature satellite data are frequently considered adequate for open ocean research. However, coastal regions, including coral reef, estuarine and mesoscale upwelling regions require high-resolution (1-km pixel) SST data. The AVHRR SST data often suffer from navigation errors of several kilometres and still require manual navigation adjustments. The second serious problem is faulty and ineffective cloud-detection algorithms used operationally; many of these are based on radiance thresholds and moving window tests. With these methods, increasing sensitivity leads to masking of valid pixels. These errors lead to significant cold pixel biases and hamper image compositing, anomaly detection, and time-series analysis. Here, after manual navigation of over 40,000 AVHRR images, we implemented a new cloud filter that differs from other published methods. The filter first compares a pixel value with a climatological value built from the historical database, and then tests it against a time-based median value derived for that pixel from all satellite passes collected within ${\pm}3$ days. If the difference is larger than a predefined threshold, the pixel is flagged as cloud. We tested the method and compared to in situ SST from several shallow water buoys in the Florida Keys. Cloud statistics from all satellite sensors (AVHRR, MODIS) shows that a climatology filter with a $4^{\circ}C$ threshold and a median filter threshold of $2^{\circ}C$ are effective and accurate to filter clouds without masking good data. RMS difference between concurrent in situ and satellite SST data for the shallow waters (< 10 m bottom depth) is < $1^{\circ}C$, with only a small bias. The filter has been applied to the entire series of high-resolution SST data since1993 (including MODIS SST data since 2003), and a climatology is constructed to serve as the baseline to detect anomaly events.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.2
• /
• pp.66-78
• /
• 1992

Available data for the radar clutter, and the empirical and the theoretical models for the radar clutter have been collected and analyzed. Data sets and models from the remote sensing field have been studied extensively. Although the grazing angles used in remote sensing is larger than the angles normally encountered in radar clutter application, remote sensing field has the merit of abundance of data in much more detailed target classes. The remote sensing model is also superior to the normally used clutter models in the sense that each target class has its own model, rather than being generally characterized by assumed roughness parameters.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.05a
• /
• pp.319-320
• /
• 2008

This paper introduces remote-sensing data which can be practically applied for offshore wind resource assessment. Development of offshore wind energy is inevitable for Korea to achieve the national dissemination target of renewable energy, i.e., 5% uptil 2010. However, the only available offshore in-situ measurement, marine buoy data would not represent areal wind characteristics. Consequently, remote-sensing technology has been started to apply to offshore wind resource assessment and is actively developing. Among them, NCAR/NCEP reanalysis dataset, QuikSCAT blended dataset, and offshore wind retrieval from SAR imagery are briefly summarized in this paper.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.43-47
• /
• 1999

In this paper, we describe the configuration of the KITSAT-3 image data receiving, archiving, processing and distribution system in operation. Following the low-cost and software-based design concept, the whole system is composed of three PCs : two for data receiving, archiving and processing which provide a full dual-redundant configuration and one for image catalog browsing which can be accessed by public users. Except that receiving and archiving PCs have serial data ingest boards plugged in, they are configured by general peripherals. This basic and simple hardware configuration made it possible to show that a very low cost system can support a full ground operation for the utilization of high-resolution satellite image data.

• Proceedings of the KSRS Conference
• /
• 1999.11a
• /
• pp.491-495
• /
• 1999

We compared the satellite observed temperature with the radiosonde observed temperature in the Korean Peninsula. The radiosonde observed data were obtained from four upper air observation stations in the Korean Peninsula from 1981 to 1998, and that was compared with the satellite observed data of the channel-2 and channel-4 of microwave sounding unit(MSU) on board NOAA series of polar-orbiting satellites. The radiosonde data were reconstructed into monthly radiosonde T$_{b}$ using MSU weighting function. The monthly climatology shows radiosonde T$_{b2}$ is higher than MSU T$_{b2}$ in summer. The correlation between MSU T$_{b2}$ and radiosonde T$_{b2}$ is 0.72-0.76 and 0.73-0.81 between MSU T$_{b4}$ and radiosonde T$_{b4}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.393-402
• /
• 2007

Remote sensing data can be integrated into crop models, making simulation improved. A crop model that uses remote sensing data was evaluated for its capability, which was performed through comparing three different methods of canopy measurement for cotton(Gossypium hirsutum L.). The measurement methods used were leaf area index(LAI), hand-held remotely sensed perpendicular vegetation index(PVI), and satellite remotely sensed PVI. Simulated values of cotton growth and lint yield showed reasonable agreement with the corresponding measurements when canopy measurements of LAI and hand-held remotely sensed PVI were used for model calibration. Meanwhile, simulated lint yields involving the satellite remotely sensed PVI were in rough agreement with the measured lint yields. We believe this matter could be improved by using remote sensing data obtained from finer resolution sensors. The model not only has simple input requirements but also is easy to use. It promises to expand its applicability to other regions for crop production, and to be applicable to regional crop growth monitoring and yield mapping projects.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.570-572
• /
• 2003

In this paper, a method of vegetation spectrum measurement using multi spectrum camera was studied. Each pixel in taken images using multi spectrum camera have spectrum data, the relationship between spectrum data and distribution, structure, etc. are directly turned out. In other words, detailed spectrum data information of object including spatial distribution can be obtained from those images. However, the camera has some problems for applying field measurement and data analysis. In this study, those problems are solved.

• Korean Journal of Remote Sensing
• /
• v.20 no.5
• /
• pp.329-335
• /
• 2004

Biotop map can be utilized for nature conservation and assessment of environmental impact for human activities in urban area. High resolution satellite images such as IKONOS and KOMPSAT1-EOC were interpreted to classify land use, hydrology, impermeable pavement ratio and vegetation for biotop mapping. Wildlife habitat map and detailed vegetation map obtained from former study results were used as ground truth data. Vegetation was investigated directly for the area where the detailed vegetation map is not available. All these maps were combined and the boundaries were delineated to produce the biotop map. Within the boundary, the characteristics of each polygon were identified, and named. This study investigates the possibility of biotop mapping using high resolution satellite remote sensing data together with field data with the goal of contributing to nature conservation in urban area.

• Korean Journal of Remote Sensing
• /
• v.26 no.6
• /
• pp.681-691
• /
• 2010

LiDAR waveform decomposition plays an important role in LiDAR data processing since the resulting decomposed components are assumed to represent reflection surfaces within waveform footprints and the decomposition results ultimately affect the interpretation of LiDAR waveform data. Decomposing the waveform into a mixture of Gaussians involves two related problems; 1) determining the number of Gaussian components in the waveform, and 2) estimating the parameters of each Gaussian component of the mixture. Previous studies estimated the number of components in the mixture before the parameter optimization step, and it tended to suggest a larger number of components than is required due to the inherent noise embedded in the waveform data. In order to tackle these issues, a new LiDAR waveform decomposition algorithm based on the sequential approach has been proposed in this study and applied to the ICESat waveform data. Experimental results indicated that the proposed algorithm utilized a smaller number of components to decompose waveforms, while resulting IMP value is higher than the GLA14 products.