• 대한의용생체공학회:의공학회지
• /
• 제29권4호
• /
• pp.295-301
• /
• 2008

A wireless 3 channel ECG monitoring system was developed so that it could monitor the health and movement state during subject's daily life. The developed system consists of a wireless biomedical signal acquisition device, a personal healthcare server, and a remote medical server. Three experiments were performed to evaluate the accuracy, reliability and operability, applicability during daily life of the developed device. First, ECG signals were measured using the developed device and commercial reference device during sitting and marking time and compared to verify the accuracy of R-R intervals. Second, the reliable data transmission to remote server was verified on two types of simulated emergency event using patient simulator. Third, during five types of motion in daily life, the accuracy of data transmission to remote server using CDMA network was verified on two types of event occurring. By acquiring and comparing subject's biomedical signal and motion signal, the accuracy, reliability and operability, applicability during daily life of the developed device were verified. In addition, PDA-phone based wireless system enabled subject to be monitored without any constraints. Therefore, the developed system is expected to be applicable for monitoring the aged and chronic diseased people and giving first-aid in emergency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.79.6-79
• /
• 2002

We propose here sequential 2 methods for obtain information of current or potential data for power transmission line. One is a digital data transmission unit, this is, an output of a current sensor of power transmission line is digitalized by use of an easy asynchronous protocol. The unit has high speed transform rate, easy making header caused of consisting of only logic circuit. The other is, the output of the unit is transformed via LAN interface and displayed on a personal computer. We have confirmed remote measuring using the method for 100A and 240 A of the current information of power transmission line. Therefore we will be able to see a current waveform by use of internet at a cheep c...

• 정보학연구
• /
• 제9권4호
• /
• pp.57-63
• /
• 2006

The intelligent elder brother groove network robot service the new broadband presence line is conversionce application service. Robot control data transmission hazard UDP packet of the remote control data which stands duplication necessary to transmit. TCP the error ratio to be high qualitative recording transmission pattern it of the transmission unit and is irregular the distance is distant to show and also the transmission lag is visible increases. The recording packet drop whose UDP degree error ratio will be high is frequent and does not arrive packet little by little increases is a possibility of knowing in the transmission unit. The technique which it proposes with traffic pattern of the transmission unit is visible the transfer characteristic of the same shape from 1% packet error ratio degree. The effective transmission technique of the robot control data which puts a base in UDP protocols was proposed from the present paper. Following research it leads and it follows the duplication transmission number of time in error rate of radio link and it was thought all that controls petty the research of the mechanism which progresses is necessary.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.412-415
• /
• 1999

In this paper, we describe an implementation of the B-Link bus interface logic for a directory controller and a remote access cash controller in the SCI-based CC-NUMA multimedia server developed by ETRI . The CC-NUMA multimedia server is composed of a number of Pentium III SHV nodes and a SCI interconnection network. To communicate with remote nodes, each node has a CC-Agent which consists of a processor bus interface(PIF). a directory controller(DC), a remote access cash controller(RC), and two SCI 1ink controllers(LCs). The B-Link bus interface logic is developed for a directory controller and a remote access cash controller in order to communicate with a SCI link controller on a B-Link bus. It consists of a sending master controller a receiving slave controller, and asynchronous data buffers. And It performs a self-arbitration, a data packet transmission, a queue allocation, an early terminal ion. and a cut-through data path.

• 제어로봇시스템학회논문지
• /
• 제9권3호
• /
• pp.196-203
• /
• 2003

Recent increase in accessibility to the internet makes it easy to use the internet-connected devices. The internet could allow any user can reach and command any device that is connected to the network. But these teleoperation systems using the internet connected device have several problems such as the network time delay, data loss and development cost of an application for the communication with each other. One feasible solution is to use local and external network line for the network time delay, transmission control protocol for data loss and Java language to reduce the development period and cost. In this study, web-based remote control system using Java language is newly proposed and implemented to a pneumatic servo control system to solve the time delay, data loss and development cost. We have conducted several experiments using pneumatic rodless cylinder through the internet and verified that the proposed remote control system was very effective.

• 전자공학회논문지
• /
• 제50권9호
• /
• pp.144-155
• /
• 2013

본 논문에서는 안드로이드 앱과 TI 320F28335 MCU를 활용한 마이크로그리드용 저가형 원격 전원품질이상 감시 시스템(Remote Power-quality-failure Monitoring System : RPMS)을 제안한다. 설계한 RPMS 테스트 베드는 스마트 노드와 서버 그리고 안드로이드 앱으로 구성된다. 특별히 RPMS 스마트 노드는 기존 감시 시스템과는 달리 C2000 계열 MCU를 이용한 저가형으로 설계되며 전력신호처리를 위한 신호처리 기능과 함께 전원품질 모니터링 정보 전송을 위한 데이터 전송 기능을 포함한다. 전력신호처리 기능은 순시전압강하, 순시전압상승 혹은 순시정전에 대한 웨이브렛 기반 검출 알고리즘과 고조파에 대한 FFT 기반 검출 알고리즘을 구현하며, 이를 이용 신뢰성 있는 실시간 전원품질 감시를 가능하게 한다. 데이터 전송 기능은 전원품질 원격 감시를 위한 저 복잡도의 전용 전송 프로토콜 알고리즘을 구현하며, 품질이상 검출 메시지 전송을 위한 간단한 데이터 포맷 (msg_Diag)을 정의 사용한다. 스마트 노드 측정 결과는 서버는 물론 WiFi (혹은 WAN) 망에 연동되는 안드로이드 폰으로 전송되어 실시간 원격 모니터링을 가능하게 한다. RPMS 테스트 베드의 서버와 노드 간 통신에는 RS-232 혹은 블루투스의 유 무선통신을 이용하며, 노드에 구현된 전원품질이상 검출 알고리즘은 CCS (Code Composer Studio) 3.3 환경하에 C 언어로 구현한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.952-955
• /
• 2000

Nowadays, Internet is so popular that we can easily access the remote site to search information and to communicate remote site and users. People who want to make a collaborate working environment can use JAVA, CORBA, and other internet programming tools like a Perl/XML. The mechanist are try to make the environment fur collaboration within design/manufacturing, simulation, remote sensing through TCP/IP And many industries and research institutions are working towards the agile manufacturing. This paper describes an internet-based real-Time remote monitoring system. The system consists of a hardware setup and a software interface. The hardware setup consists of a machine and its data acquisition hardware, while the software interface incorporates the data acquisition software, the server program, and the client program. The server program acts as the main interface between the data acquisition system and the internet technology. The client program is to be distributed to the remote users who want to monitor the machining status. The system has been demonstrated and verified for an industrial High-Speed Machine (HSM) especially measuring cutting force and acoustic emission. To share the signal, we make the WWW server and display its value. The system has been found to be highly efficient, reliable and accurate.

• 한국인터넷방송통신학회논문지
• /
• 제14권4호
• /
• pp.133-139
• /
• 2014

요즈음, 원격 처방전 및 원격 진료가 시범적으로 운영되고 있다. 그러나 대부분의 원격지 병원에서 환자 생체 데이터를 암호화 하지 않고 전송하는 경우, 해커가 환자 처방전 데이터를 해킹해서 처방전 약물을 바꾸면 환자는 심각한 장애를 받을 수 있다. 따라서, 본 논문에서는, 이러한 문제점을 해결하기 위해 원격 처방전과 의료 정보시스템에 환자의 비밀번호, 개인 식별 정보, 바이오 정보 등을 암호화하는 알고리즘과 안전한 보안 구현 방안이 제시되었다.

• 한국컴퓨터정보학회논문지
• /
• 제7권4호
• /
• pp.33-39
• /
• 2002

여러대의 CNC Controller를 DNC(Direct Numerical Control) Network Infra를 구축하기 위한 프로그램을 효율적으로 하기 위해 현재 많은 시스템들이 개발되어 사용되고 있다. 그러나 이 시스템들은 원거리 상의 서버 컴퓨터와 머시닝 센터간의 상호 연결이 원만하지 않아 작업에 비효율적인 면이 있고, 또 머시닝 센터에서의 데이터 송·수신에서 일어나는 오류 문제에 대한 시스템으로의 적절한 대처를 할 수가 없다는 문제점이 있다. 그래서, 본 논문에서는 Multi DNC system을 통해 CNC(Computer Numerical Control) 컨트롤러에서 CAD/CAM 서버 컴퓨터의 데이터를 오류 없이 수신 가능한 데이터 원격 제어 시스템을 구성하고자 하였다. 이 데이터 원격 제어 시스템의 주요 장점으로는 머시닝 센터에서 운영자가 쉽게 CAD/CAM 서버 컴퓨터에 저장된 NC 데이터 호출과 송출이 자유롭고, 서버 컴퓨터와 공작기계간의 상호 대화가 없이도 머시닝센터에서의 원격 제어가 가능하다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.345-347
• /
• 2006

In this paper, we study the robot controller design using the voice and data communication via CDMA(Code Division Multiple Access) mobile communication network. We design the robot remote controller using the three methods, telephone call speech recognition, DTMF (Dual Tone Multiple Frequency) realization, SMS(Short Message Service) transmission/reception way via CDMA mobile communication network. We investigate the validity and effectiveness of the proposed remote controller which applied to the mobile robot.