• 제목/요약/키워드: Relieved Displacement

검색결과 12건 처리시간 0.022초

변위 측정을 기본으로 한 구멍뚫기방법에 의한 잔류응력 측정 방법 (Determination of Residual Stress by the Hole Drilling Method Based on Displacement Measurement)

  • 신동일;주진원
    • 대한기계학회논문집A
    • /
    • 제29권11호
    • /
    • pp.1542-1550
    • /
    • 2005
  • This paper presents the numerical procedure for calculating non-uniform residual stresses based on relieved displacements obtained from incremental hole drilling. The relationship between the in-plane displacement produced by introducing a blind hole and the corresponding residual stress is established. Finite element calculations are described to evaluate the relieved coefficients required for the determination of non-uniform residual stresses. Validity of the proposed method has been tested through three axisymmetric test examples and two three-dimensional examples. As a result of . simulation on the test examples, it is found that this numerical procedure is well adopted to measuring non-uniform residual stress in the full hole depth range of the hole diameter from the surface. The accuracy of the hole drilling method with displacement measurement is discussed, comparing tile method with strain measurement

재하방법에 따른 프리플렉스빔의 역학적 거동에 관한 연구 (A Study on the Mechanical Behavior of Preflex Beam under Different Preflexion Loading Conditions)

  • 방한서;주성민;김규훈;안해영
    • Journal of Welding and Joining
    • /
    • 제22권2호
    • /
    • pp.33-37
    • /
    • 2004
  • Since the preflex beam is fabricated by welding, the pre-compressive stresses that should occur over the concrete pier are diminished by the welding residual stresses. For this reason distribution of welding residual stresses must be analyzed accurately and welding residual stresses should be relieved during the fabrication. In this study strain history, displacement of beam and re-distributed welding residual stresses by different loading conditions are measured and compared to choose more appropriate preflex condition.

Microstructure and CTOD (crack tip opening displacement) of Deposit Weld Metal in 30 mm Thick Plate

  • Lee Hae-Woo;Kim Hyok-Ju;Park Jeong-Ung;Kang Chang-Yong;Sung Jang-Hyun
    • 한국재료학회지
    • /
    • 제14권9호
    • /
    • pp.642-648
    • /
    • 2004
  • The microstructure and crack tip opening displacement (CTOD) of deposit weld metal were investigated for a 30 mm- thick plate welded with flux cored arc welding (FCAW) and submerged arc welding (SAW) processes. The CTOD test was carried out both as welded condition and as stress-relieved specimen by local compression. The crack growth rates in FCAW were faster than those in a SAW, and the acicular ferrite content by the SAW process was increased relatively more than that by the FCAW process. The fatigue crack growth rate in a welded specimen was faster than that in locally compressed specimen. The CTOD value of locally compressed specimens was lower than that of as welded specimen. Furthermore, the CTOD value tested with the SAW process was higher than that tested with the FCAW process.

Psoas Compartment Blockade in a Laterally Herniated Disc Compressing the Psoas Muscle - A Case Report -

  • Kim, Hye-Young;Park, Jin-Woo;Park, Soo-Young;Moon, Jee-Youn;Shin, Jae-Hyuck;Park, Sang-Hyun
    • The Korean Journal of Pain
    • /
    • 제25권2호
    • /
    • pp.116-120
    • /
    • 2012
  • A psoas compartment block has been used to provide anesthesia for orthopedic surgical procedures and analgesia for post-operative pain. Currently, this block is advocated for relieving pain in the lower extremity and pelvic area resulting from various origins. We report a case of a 69-year-old male patient who had gait abnormality with posterior pelvic and hip pain, which were both aggravated by hip extension. From the magnetic resonance image, the patient was found to have a laterally herniated intervertebral disc at the L2/3 level, which compressed the right psoas muscle. This was thought to be the origin of the pain, so a psoas compartment block was performed using 0.25% chirocaine with triamcinolone 5mg, and the pain in both the pelvis and hip were relieved.

Large Cavernous Hemangioma of the Subscapularis Muscle - A Case Report

  • Lee, Ki-Won;Lee, Hyun Il;Kim, Chung-Hwan;Kim, Tae-Kyung
    • Clinics in Shoulder and Elbow
    • /
    • 제17권4호
    • /
    • pp.185-189
    • /
    • 2014
  • We report a case of intramuscular hemangioma in the subscapularis muscle and the resulting impairment of shoulder function in an adult patient. A nineteen-year-old female complained of shoulder pain and the development of a mass in the absence of previous trauma. Physical examinations, including lift-off and belly-press tests, showed abnormality. X-ray showed multiple calcifications in the front of the scapula. Magnetic resonance imaging showed a soft-tissue mass occupying almost the entire intramuscular portion of the subscapularis muscle. An arthroscopic examination excluded the possibility of a joint invasion, after which the entire mass was successfully removed by open excision. The displacement of the subscapularis by the mass was relieved after the surgery. Pathological diagnosis of the tissue confirmed a cavernous hemangioma. Both shoulder pain and function was improved after operation. There was no evidence of recurrence even at the 2-year follow-up. Rare forms of hemangioma adjacent to the shoulder joint could be successfully managed with surgical excision. Differential diagnosis, such as synovial chondromatosis, pigmented villo-nodular synovitis, and malignant sarcoma, should also be considered.

AH36-TMCP강의 용접후열처리 효과에 관한 연구 (A Study on Effect of PWHT in AH36-TMCP Steel)

  • 유효선;장원상;안병국;정세희
    • Journal of Welding and Joining
    • /
    • 제16권6호
    • /
    • pp.44-51
    • /
    • 1998
  • It is well known that the fine bainitic microstructure obtained by TMCP(thermo-mechanical control process) secures the high toughness of base metal. Besides, TMCP steel is very suitable for high heat input in welding as it has low carbon equivalent. In HAZ, however, the accelerated cooling effect imparted on the matrix by the weld thermal cycles is relieved and thus the weldment of TMCP steel has softening zone which shows low fracture toughness compared with base metal. Therefore, PHWT of weldment is carried out to improve the fracture toughness in weldment of TMCP steel which has softening zone. In this study, the effects of PWHT on the weldment of AH36-TMCP steel are investigated by the small punch (SP) test. From the several results such as SP energy and displacement at room temperature, the behavior of transition curves, the fracture strength at -196$^{\circ}C$, distribution of (DBTT)sp and (DBTT)sp, the PWHT condition of A.C. after 85$0^{\circ}C$-1 sec W.C. was suitable condition for recovering a softening zone of HAZ as welded.

  • PDF

안면비대칭 환자의 악교정술 후 안면비대칭의 개선에 따른 악관절장애 증상의 변화 (CHANGES OF TEMPOROMANDIULAR JOINT SYMPTOMS AFTER ORTHOGNATHIC SURGERY IN THE ASYMMETRIC PROGNATHISM PATIENTS)

  • 김영삼;류동목
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제33권5호
    • /
    • pp.518-523
    • /
    • 2007
  • Purpose: The purpose of this study is to prove that orthognatic surgery on asymmetric prognathism patients improve the temporomandibular dysfunction. Materials and methods: All 30 patients underwent mandibular setback with B-SSRO including 22 patients Le Fort I surgery in KyungHee medical center. Preoperative and postoperative PA cephalograms & transcranial radiographs were measured midline deviation in Mx and Mn, occlusal canting change, condyle position, the temporomandibular dysfunction were checked before surgery, within 1 month after surgery, $3{\sim}6$ months, 12-24 months after surgery respectively. Results: The temporomandibular dysfunction were relieved after surgery in 17 patients of 25 patients. Conclusion: Orthognatic surgery may benefit the temporomandibular joint dysfunction in facial asymmetry patients by obtaining a postoperative stable occlusion and better physiologic neuromuscular function. Specially impovement of occlusal canting may reduce condyle displacement of midline deviation side and the temporomandibular joint dysfunction.

구조적 대응체 분석법에 의한 골격성 II급 부정교합 환자의 악교정 수술전후의 비교 (A Comparison of pre and post-surgical characteristics in skeletal Class III malocclusion patients using counterpart analysis)

  • 손병화;경승현;김범수
    • 대한치과교정학회지
    • /
    • 제34권1호
    • /
    • pp.93-107
    • /
    • 2004
  • Enlow의 구조적 대응체 분석법은 다수의 평균에 의한 정상치와 비교하는 분석법과는 달리 개개인에서 두 개안면의 구성양상이 발달되어온 해부학적, 발육학적 특징의 복합체를 설명하는 방법이다. 본 연구에서는 악교정 수술을 시행한 골격성 III급 부정교합 환자 80명(남자 40명, 여자 40명)을 대상으로 구조적 대응체 분석법을 이용하여 수술 전후를 비교하고, 정상교합자와 비교하여 다음과 같은 결과를 얻었다. 1. 수술에 의해서 주로 하악지 전후방 길이(B3)가 감소되어 상하악의 전후방적 부조화가 해소되었다. 2. 수술에 의해서 하악지의 배열(R3, R4)이 후방으로 재배열되었으며 교합평면(R5)은 후하방으로 회전되었다. 3. 수술후와 정상교합자의 비교결과 수술후에 골격성 III급 양상은 해소되었으나 두개저수준(R1, R2)에서는 차이를 보이고 있다. 4. 수술방법에 따른 비교결과 양악수술은 상악골의 길이(A4), 하악지의 배열(R3, R4), 교합평면의 각도(R5)에서 하악수술과 차이를 보였으나 두 그룹간의 차이는 크지 않았다. 한국인 골격성 III급 부정교합자의 특징을 살펴본 지난 연구에서 골격적 원인은 두개저의 후상방회전, 상악골의 후방위치, 하악지의 전방경사, 하악골체부의 길이증가였는데 본 연구 결과 실제 수술에서 개선되는 요소는 주로 하악지의 전후방 길이 감소, 상악골의 전진이기 때문에 상대적인 개선으로 골격성 III급 양상이 해소되었다고 볼 수 있다. 이러한 결과는 실제적인 수술부위가 상악골과 하악골의 일부에 국한되기 때문이다.

$Bovie^{(R)}$를 이용한 Percutaneous Lumbar Medial Branch Neurotomy (Percutaneous Lumbar Medial Branch Neurotomy Using Bovie Electrosurgical Unit)

  • 신근만;김종균;김수관;최홍철;홍순용;최영룡
    • The Korean Journal of Pain
    • /
    • 제8권2호
    • /
    • pp.350-353
    • /
    • 1995
  • The first lesion in neural tissue produced by electrical currents were made in the 19th century by workers using direct current. In 1953, Sweet and Mark clearly demonstrated that DC lesions have unpredictable and ragged borders and may vary in size. They, as well as Hunsperger and Wyss, suggested that the use of high frequency currents might provide improved results and were proved correct. However, $Bovie^{(R)}$ electrosurgical unit may also be used in percutaneous medial branch neurotomy if a lesion made at a point or the dorsal surface of the transverse process just caudal to the most medial end of the superior edge of the transverse process (Bogduk's method). At this point the medial branch lies on the bone and its depth and medial displacement are defined by the bone which precludes the need for lateral radiographs to check placement. A lesion was made at same target point using the $Bovie^{(R)}$ electrosurgical unit in a 41 year male patient who had received a Kaneda operation because of L2 compression fracture. The patient was relieved of pain without any adverse effects.

  • PDF

분만전후 젖소의 지방간증에 관한 연구 (A Study on Fatty Liver Syndrome in Periparturient Holstein Cows)

  • 최희인;이준섭;이창우;윤영민
    • 한국임상수의학회지
    • /
    • 제10권2호
    • /
    • pp.147-155
    • /
    • 1993
  • This study was carried out to investigate the Preventive and treatment effects of mixed compound of vitamin E and selenium, and ursodeoxycholic acid on the pre-parturient and post-parturient fatty liver of high. yielding dairy cows. Thirty pregnant dairy cows(2 weeks preparturition) were divided into clinical(13cows) and subclinical(17 cows) groups based upon blood chemical values, blood serum protein levels and clinical symptoms. The clinical group was subdivided into treated clinical group(6 cows) and non-treated clinical group(7 cows). The cows(treated clinical group) with fatty liver diagnosed before parturition were dosed with mixed compound of vitamin I(1head) and selenium(10mg/head) intramuscularly once before and after parturition, respectively. These cows(treated clinical group) were also given ursodeoxycholic acid(50g/head) intramuscularly 3 times before parturition. The cows(treated clinical group) with fatty liver diagnosed after parturition were also given the same compounds as dosed to the above cows at same dose rate once or 3 times, respectively after parturition. Blood samples were collected from the cows on 4th, 7th and 2nd day of preparturition and on 1st, 7th, 14th and 20th day of postparturition. Blood chemical values(non-esterified fatty acid : NEFA) concentration, serum aspartate aminotransferase activity, serum ${\gamma}$-glutamyl transpeptidase activity, bilirubin concentration, glucose level) were checked and clinical symptoms of the cows were also observed. 1. The cows in non-treated clinical group showed severe depression, anorexia and diarrhea from prepartum period, and retained palcenta, endometritis, ketosis, abomasal displacement and mastitis after parturition. Cows in treated clinical group showed moderate depression, anorexia, diarrhea during preparturient period, but they were relieved within a week from parturition. Cows in subclinical group showed mild depression, anorexia and diarrhea after parturition, but these symptoms were not observed in prepartum period. 2. NEFA concentration, serum aspartate aminotransferase activity, serum ${\gamma}$-glutamyl transpeptidase activity and bilirubin concentration observed In the cows of treated clinical group were significantly lower than those of the cows non-treated clinical group. The blood glucose concentration of the cows in treated clinical group were higher than those of the cows in non-treated clinical group. These results indicate that the preparturient and postparturient fatty liver of high-yielding dairy cows could be reduced by dosing the animals with appropriate amounts of mixed compound of vitamin I and selenium, and ursodeoxycholic acid at proper times of the preparturition and postparturition of the dairy cows.

  • PDF