• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.467-471
• /
• 2014

The natural frequencies of a mechanical system are determined by the system parameters such as masses and stiffness of the system. Since material irregularities and manufacturing tolerances always exist in most of practical engineering situations, the system parameters always have uncertainties. As the uncertainties of the parameters increase, the uncertainties of the system natural frequencies also increases. Then, the reliability of the system deteriorates. So, the uncertainty of the system natural frequencies should be analyzed accurately and considered in the design of the system. In order to analyze the uncertainty of the system natural frequencies employing most of existing uncertainty analysis methods, the probability distributions of the uncertain system parameters should be identified. In most practical situations, however, identification of the probability distributions is almost impossible because of limited time and cost. For that case, the reliability should be estimated based on finite samples of the system parameters. In this paper, sample based reliability estimation method employing extreme value theory was proposed. Using the proposed estimation method, sample based reliability design of the system natural frequencies was conducted.

• Journal of Ship and Ocean Technology
• /
• 제4권2호
• /
• pp.38-57
• /
• 2000

This paper deals with reliability analysis of specially orthotropic plates subjected to transverse lateral pressure loads by using Monte Carlo simulation method. The plates are simply supported around their all edges and have a low short span to plate depth ratio with rectangular plate shapes. Various levels of reliability analyses of the plates are performed within the context of First-Ply-Failure(FPF) analysis such as ply-/laminate-level reliability analyse, failure tree analysis and sensitivity analysis of basic design variables to estimated plate reliabilities. In performing all these levels of reliability analyses, the followings are considered within the Monte Carlo simulation method: (1) input parameters to the strengths of the plates such as applied transverse lateral pressure loads, elastic moduli, geometric including plate thickness and ultimate strength values of the plates are treated as basic design variables following a normal probability distribution; (2) the mechanical responses of the plates are calculated by using simplified higher-order shear deformation theory which can predict the mechanical responses of thick laminated plates accurately; and (3) the limit state equations are derived from polynomial failure criteria for composite materials such as maximum stress, maximum strain, Tsai-Hill, Tsai-Wu and Hoffman.

• 산업공학
• /
• 제6권2호
• /
• pp.67-78
• /
• 1993

In this paper, we deal with the application of the fuzzy sets theory to evaluate and estimate the system reliability under the fault tree analysis. We formulate the uncertainty of component reliability to fuzzy sets, and propose a procedure for obtaining the system reliability in case the system structure is described by fault tree. An importance measure of each component is proposed. Computer program for fuzzy fault tree analysis(FFTA) is developed using C language to obtain the system reliability and the component‘s fuzzy importance.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.605-613
• /
• 2014

신뢰성 해석을 수행할 때 정보부족으로 인해 발생하는 인식론적 불확실성(epistemic uncertainty)은 고유의 변동성에 의해 존재하는 내재적 불확실성(aleatory uncertainty)보다 더 중요하게 다뤄야 한다. 그러나 그동안 개발된 확률이론은 주로 내재적 불확실성을 모델링하는데 이용된 반면, 인식론적 불확실성의 모델링에 대해서는 아직 확실한 접근법이 없었다. 최근 이를 위해 probability theory를 포함한 여러 접근법들이 제시되고 있지만 이들은 서로 다른 통계적 이론들을 바탕으로 도출되었기 때문에, 각 방법들의 결과들을 이해하는데 어려움이 있었다. 본 연구에서는 고장 확률을 계산하는 문제를 가지고 이러한 방법들이 인식론적 불확실성을 어떻게 다루는지를 비교, 분석하였다. 이를 위해 probability method, combined distribution method, interval analysis method 그리고 evidence theory를 대상으로 신뢰도 분석문제에 대해 각 방법들의 특징들을 비교하였으며, 그 결과는 다음과 같다. 입력변수의 확률분포 형태를 알 수 있다면 probability method가 가장 우수하나, 이를 전혀 모르면 interval method를 사용해야 한다. 그러나 계산비용 면에서는 두 방법이 유사하므로 결국 입력변수의 확률특성 정보가 얼마나 있느냐에 따라 방법을 선택한다. Combined distribution method는 failure probability의 평균만 제공하므로 사용하지 않는 것이 좋다. 다만 이 방법은 계산비용이 매우 적게 드는 장점이 있다. Evidence theory는 probability와 interval 방법의 중간에 해당하며, 구간별 probability assignment를 세분화 할수록 probability결과에 접근한다. 이 방법은 계산비용이 가장 높은 것이 문제이다.

• Computers and Concrete
• /
• 제3권1호
• /
• pp.1-15
• /
• 2006

The seismic safety of reinforced concrete containment building can be evaluated by probabilistic analysis considering randomness of earthquake, which is more rational than deterministic analysis. In the safety assessment of earthquake-resistant structures by the deterministic theory, it is not easy to consider the effects of random variables but the reliability theory and random vibration theory are useful to assess the seismic safety with considering random effects. The reliability assessment of reinforced concrete containment building subjected to earthquake load includes the structural analysis considering random variables such as load, resistance and analysis method, the definition of limit states and the reliability analysis. The reliability analysis procedure requires much time and labor and also needs to get the high confidence in results. In this study, random vibration analysis of containment building is performed with random variables as earthquake load, concrete compressive strength, modal damping ratio. The seismic responses of critical elements of structure are approximated at the most probable failure point by the response surface method. The response surface method helps to figure out the quantitative characteristics of structural response variability. And the limit state is defined as the failure surface of concrete under multi-axial stress, finally the limit state probability of failure can be obtained simply by first-order second moment method. The reliability analysis for the multiaxial strength limit state and the uniaxial strength limit state is performed and the results are compared with each other. This study concludes that the multiaxial failure criterion is a likely limit state to predict concrete failure strength under combined state of stresses and the reliability analysis results are compatible with the fact that the maximum compressive strength of concrete under biaxial compression state increases.

• 한국농공학회지
• /
• 제38권6호
• /
• pp.35-41
• /
• 1996

The theory of consolidation has been achieved remarkable development in terms of theory such as finite consolidation theory, two dimensional Rendulic consolidation theory. Though those theories are well defined, the analysis is by no means straightforward, because associated properties are very difficult to determine in the laboratory, Therefore Terzaghi's one dimensional consolidation theory and Barron's cylindrical consolidation theory are still widely used in engineering practice. The theoretical shortcomings of those consolidation theories and uncertainties of associated properties make inevitably some discrepancy between theoretical and field settlements. Field settlement measurement by settlement plate is, therefore, widely used to overcome the discrepancy. Ultimate settlement is one of the most important factor of embankment construction on soft soils. Nowadays the ultimate settlement prediction methods using field settlement data are widely accepted as a helpful tool for field settlement analysis of embankment construction on soft soils. Among the various methods of ultimate settlement prediction, hyperbolic method and Asaoka's method are most commonly used because of their simplicity and ability to give a reasonable estimate of consolidation settlement. In this paper, the reliability of hyperbolic method and Asaoka's method has been examined using analytical methods. It is shown that both hyperbolic method and Asaoka's method are significantly affected by the direction of drainage.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.31-36
• /
• 2010

Collecting all failures during life cycle of vehicle is not easy way because its life cycle is normally over 10 years. Warranty period can help gathering failures data because most customers try to repair its failures during warranty period even though small failures. This warranty data, which means failures during warranty period, can be a good resource to predict initial reliability and permanence reliability. However uncertainty regarding reliability prediction remains because this data is censored. University of Wuppertal and major auto supplier developed the reliability prognosis model considering censored data and this model introduce to predict reliability estimate further "failure candidate". This paper predicts reliability of telecommunications system in vehicle using the model and describes data structure for reliability prediction.

• 자원환경지질
• /
• 제41권6호
• /
• pp.763-771
• /
• 2008

불확실성은 사면의 안정성을 해석하는 과정에서 특성자료의 부족이나 지질공학적 특성의 공간적 변동성 등의 원인으로 포함되며 따라서 불확실성으로 인해 변수들의 정확한 값을 획득하기 힘들게 된다 이러한 문제점을 해결하기 위하여 확률론적 해석기법이 활용되어 왔으며 최근에는 퍼지집합이론(fuzzy set theory)을 이용한 해석기법이 활용되고 있다. 특히 확률변수들의 자료 양이 제한적인 경우 변수의 확률특성을 정확하게 파악하기 힘들어 확률론적 해석기법의 활용이 제한적일 수 있으며 이러한 경우 퍼지집합이론은 확률변수의 특성을 효과적으로 표현할 수 있다. 본 연구에서는 암반사면의 안정성 해석과정에서 포함되는 불확실성을 정량화하기 위해 퍼지신뢰도척도(fuzzy reliability measure)를 활용하여 분석을 수행하였으며 특히 암반사면의 안정성에 영향을 미치는 여러 지질공학적 특성중 불연속면의 경사와 내부마찰각을 삼각형 퍼지숫자(fuzzy number)로 해석하였다 이를 위하여 연구대상사면을 선정하여 암반사면에서 발생하는 평면파괴를 대상으로 분석을 수행하였다. 퍼지신뢰도(fuzzy reliability) 해석에서는 퍼지숫자에 대한 퍼지 연산을 통해 퍼지신뢰도 지수(fuzzy reliability index)를 획득하였으며 이러한 결과를 확률론적 해석 결과와 비교하기 위하여 몬테카를로모사기법(Monte Carlo simulation)과 점추정법(point estimate method)을 이용한 확률론적 해석을 수행하였다. 해석결과 불충분한 자료 등으로 인해 불확실성의 정량화가 어려운 경우 퍼지신뢰도 해석을 통해 적절한 퍼지신뢰도 지수와 파괴확률을 획득할 수 있을 것으로 판단된다.

• 대한간호학회지
• /
• 제50권6호
• /
• pp.848-862
• /
• 2020

Purpose: The purpose of this study was to develop an instrument to evaluate the needs satisfaction of nurses and examine its validity and reliability. Methods: The initial items for the instrument were developed through a literature review and interviews, using the conceptual framework of Maslow's hierarchy of needs theory. The initial items were evaluated for content validity by 14 experts. Four hundred and eighty-six clinical nurses participated in this study through offline and online surveys to test the reliability and validity of the instrument. The first evaluation (n = 256) was used for item analysis and exploratory factor analysis, and the second evaluation (n = 230) was used to conduct a confirmatory factor analysis and to assess the criterion-related validity and internal consistency of the instrument. Test-retest reliability was analyzed using data from 30 nurses. Results: The final instrument consisted of 30 items with two sub-factors for five needs that were identified through the confirmatory factor analysis. The criterion-related validity was established using the five need satisfaction measures (r = .56). Cronbach's α for total items was .90, and test-retest reliability was .89. Conclusion: The findings from this study indicate that this instrument has sufficient validity and reliability. This instrument can be used for the development of nursing interventions to improve the needs satisfaction of clinical nurses.

• Nuclear Engineering and Technology
• /
• 제54권3호
• /
• pp.948-958
• /
• 2022

Since reliability and security of man-machine system increasingly depend on reliability of human, human reliability analysis (HRA) has attracted a lot of attention in many fields especially in nuclear engineering. Dependence assessment among human tasks is a important part in HRA which contributes to an appropriate evaluation result. Most of methods in HRA are based on experts' opinions which are subjective and uncertain. Also, the dependence influencing factors are usually considered to be constant, which is unrealistic. In this paper, a new model based on Dempster-Shafer evidence theory (DSET) and fuzzy number is proposed to handle the dependence between two tasks in HRA under uncertain and dynamic situations. First, the dependence influencing factors are identified and the judgments on the factors are represented as basic belief assignments (BBAs). Second, the BBAs of the factors that varying with time are reconstructed based on the correction BBA derived from time value. Then, BBAs of all factors are combined to gain the fused BBA. Finally, conditional human error probability (CHEP) is derived based on the fused BBA. The proposed method can deal with uncertainties in the judgments and dynamics of the dependence influencing factors. A case study is illustrated to show the effectiveness and the flexibility of the proposed method.