• Journal of Practical Agriculture & Fisheries Research
• /
• v.19 no.1
• /
• pp.15-23
• /
• 2017

Effects of artificial releases of sea cucumber around the marine ranching area in Jeollanam-do were showed very efficient by the released good seeds(total weight, 3.2g) in 'Wolhang', compared with those in 'Hwatae'. The survival rates were the higher in 'Wolhang' by 66.0% than in 'Hwatae' by 27.0%. The results indicates that the releasing effect of sea cucumber depended on the releas size. To analyze the productivity we investigated the growth and survival rates of sea cucumber according to the releasing area. Our result showed that the growth rate and survival rate was higher in 'Hwatae' than other areas. In 'Hwatae', the growth rate and survival rate were 6.2g and 32.1% respective. The results indicates that if the food supply is continued, although proceeding contamination the productivity of sea cucumber increased. Therefore, in order to enhancement and conservation of resource, bottom of fish cage should consider to the utilization.

• Korean Journal of Veterinary Research
• /
• v.21 no.1
• /
• pp.59-64
• /
• 1981

Holstein-Friesian cows(n=284) were given $100{\mu}g$ of gonadotropin-releasing hormone(GnRH) or saline solution by intramuscular injection at 10 to 22 days after parturition, and were investigated their reproductive performance and frequency of ovarian cysts. Among them 28 cystic cows were injected with $150{\mu}g$ of GnRH intramuscularly and examined the recovery rate. The results obtained in this study were summarized as follows: 1. The interval from calving to 1st ovulation was reduced from 28.2 days in controls to 16.5 days for cows given GnRH (p<0.01). 2. The intervals from calving to 1st estrus and from calving to conception were extended significantly in control group (p<0.05). 3. Inseminations per conception and conception rate at 1st insemination did not reveal difference between two groups. 4. Frequency of ovarian cysts was reduced from 14.0% in control to 4.20% for cows given GnRH (p<0.05). 5. Of the 28 cystic cows receiving $150{\mu}g$ of GnRH, 23(82.1%) responded to 1st treatment and returned to estrus $24.2{\pm}4.3$ days after treatment. 6. These data provide evidence for reduction in infertility and reproductive disorders in early postpartum dairy cows given GnRH as a prophylactic.

• Journal of Breast Disease
• /
• v.6 no.2
• /
• pp.46-51
• /
• 2018

Purpose: Endocrine therapy is the preferred treatment for hormone receptor (HR)-positive metastatic breast cancer (MBC). We investigated the efficacy of combined aromatase inhibitor (AI) and luteinizing hormone-releasing hormone (LHRH) agonist in premenopausal patients with HR-positive MBC. Methods: We retrospectively analyzed the medical records of 21 HR-positive premenopausal MBC patients treated with combined AI and LHRH agonist therapy. Results: The median follow-up period was 32.9 months. The overall response rate was 47.6%, with three complete responses (14.3%) and seven partial responses (33.3%). Nine patients (42.9%) achieved stable disease lasting more than 6 months; thus, the clinical benefit rate was 90.4%. The median time to progression was 45.4 months. No patients experienced grade 3 or 4 toxicity. Conclusion: Combined AI and LHRH agonist treatment safely and effectively induced remission or prolonged disease stabilization, suggesting that this could be a promising treatment option for HR-positive premenopausal patients with MBC.

• Journal of Environmental Science International
• /
• v.27 no.9
• /
• pp.763-770
• /
• 2018

Bioremediation in situ is heavily dependent on the oxygenic environment which would privide the dwelling microorganism with sufficient oxygen. The situation could be easily resolved with supply of an Oxygen Releasing Compound (ORC). In this paper we prepared that sort of material out of oyster shell powder (mostly calcium carbonate) that prevails every shore areas of the country. We used two different oxidizing methods in the first step of the whole manufacturing process-conventional heating in a furnace and an ultrasound generator to obtain calcium oxide. Then that calcium oxide was further oxidized into calcium peroxide which may release oxygen under a moisturized condition. The oxygen releasing experiments were run to test the performance of our products, and to determine the gas kinetics during the experiments. Interestingly, calcium peroxide derived from ultrasound treatment was much more energy-effective as ORC than that from furnace heating although the heat derived process was better than that of ultrasound in terms of oxygen content and its releasing rate. We also found that most of the data collected from the gas releasing experiments fairly supported an ordinary $1^{st}$ order kinetics to oxygen concentration, which shaped a sharp discharge of oxygen at the very early moment of each test.

• The Korean Journal of Food And Nutrition
• /
• v.11 no.2
• /
• pp.137-142
• /
• 1998

This study aims to examine appropriate kinds of pan oil to release a cake from the pan coated with polyether sulphone and to prove the change of acid value and peroxide value during the process of baking. The major factor effecting the rate of release of the cakes from the pan was properties of the oils rather than the additives. The releasing rate appeared higher as the iodine value was lower. The highest releasing rate was found in the sample, which was made of coconut oil plus 2% of wax, 2% of lecithin. The changes of acid value of the pan oil between the beginning and after baking was little different. In contrast, Peroxide value showed a great change after baking.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.377-382
• /
• 2007

Porous mineral coating have been fabricated and applied for basic research on their slow release action to a fertilizer. Feldspar was selected as raw mineral for the coating and two different particle sizes of powder were prepared. Slow-release action was estimated by using a potassium sulfate fertilizer. Spherical pellets were prepared with a pan-type pelletizer and then screened into sizes ranging 1.4 to 2.35mm. While the fertilizer pellets were rotated in the pelletizer again, the feldspar powder and 0.5% polyvinyl alcohol solution were simultaneously sprayed on the pellets. The fertilizer pellets coated with feldspar powder were fabricated. The pellets were heated to increase their strength and screened to sort by coating thickness. Potassium releasing tests were conducted for 40 days and the performance for slow-release action was estimated as functions of the heating temperature, coating thickness and raw mineral powder size. The Burst effect caused high initial releasing rate. Releasing kinetics was proportional to concentration of potassium in pellets. The pellet that was fabricated with $27.4{\mu}m$-sized feldspar and heated at $1050^{\circ}C$ showed a releasing rate of 43% on the 40th day.

• Journal of Biomedical Engineering Research
• /
• v.14 no.3
• /
• pp.283-290
• /
• 1993

In thls study, the effects of the composltional change of cast Ni-Ti alloys on its characteristics including mechanical properties, phase transformation temperature, and ion releasing rate were investigated. brittle:behavior was shown in the stress-strain curve of the alloy containing low Ti content (Ni-44.0%Ti). By increasing the Ti content, the trend in stress-strain curves changed from that of superelasticity to that of shape memory effect(Ni-44.4%Ti, Ni-45.1%Ti, Ni-45, 5%Ti). Phase transformation temperature ($A_f, {\;}M_5$ point) increased with increasing the Ti content. lon releasing rate of four types of Mi-Ti alloys was very low compared to that of the dental commerical Ni-Cr alloy.

• Transactions of Materials Processing
• /
• v.21 no.4
• /
• pp.246-251
• /
• 2012

The mechanism for mechano-luminescence(ML) in SAO phosphor was investigated quantitatively by measuring the emission intensity under three different tensile conditions. It was found that the ML of SAO was strongly dependent on the dynamic loading rate rather than by the applied load itself. The mechano-luminescent emission in SAO was evaluated based on the trap-releasing process. It was found that the shape of the ML curve in the transient regime obtained from the rate equation has good agreement with the experimental data.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.29-38
• /
• 2001

In this study, the fractional composition and the releasing of nutrients and metals from sediments of Boryung reservoir were investigated. Based on present study, the forms of sediment phosphorus of the four sites in reservoir were classified as adsorbed phosphorus, non apatite inorganic phosphorus(NAI-P), apatite phosphorus and residual phosphorus. Residual phosphorus showed the highest fration, NAI-P second, apatite phosphorus third and absorbed phosphorus fourth. The sedimentation rate of T-P and T-N in aerobic condition were $0.31mg/m^2{\cdot}day$ and $29mg/m^2{\cdot}day$. The sedimentation rate of T-P and T-N in anaerobic condition were $0.12mg/m^2{\cdot}day$ and $13.6mg/m^2{\cdot}day$. The releasing rate of T-P and T-N in anaerobic condition were $0.23mg/m^2{\cdot}day$ and $10.5mg/m^2{\cdot}day$.