• 디지털산업정보학회논문지
• /
• 제6권3호
• /
• pp.9-17
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used superposition which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time. Through this study, in terms of superposition model and simply model, the optimal time to using superposition model release the software developer to determine how much could count will help.

• 디지털산업정보학회논문지
• /
• 제6권2호
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• 대한산업공학회지
• /
• 제15권1호
• /
• pp.51-63
• /
• 1989

This paper considers software release problems based on Goel-Okumoto and S-shaped reliability growth models. Test of the software system is terminated after a preassigned time T, and it is released to the operational phase. It is assumed that correction cost of an error is increasing with test or operation time. Optimum software release time is obtained using total expected cost on the software life time as a criterion for optimization. In addition, optimal software release policies under the constraint of a software reliability requirement are discussed.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Mechanical Science and Technology
• /
• 제16권6호
• /
• pp.776-784
• /
• 2002

We have performed experimental studies for the improvements of pneumatic brake systems of freight trains. Currently, most of the freight trains operated by the Korean National Railroad have either empty-load or diaphragm type brake systems. In this study, appropriate methods that the air pressure characteristics in both type of brake systems are in accordance with each other have been investigated. We have also performed running tests using a 30 car-train set to design optimum capacity of a quick release valve. The test results show that the quick release valve is considerably effective in shortening the release time of the diaphragm type brake system. In the case of a normal brake application, the diaphragm type brake system with the quick release valve reduces the release time to 34% of that of the system without the quick release valve. This release time is almost equivalent to that of the empty-load type brake system. Accordance of braking performance in different types of brake systems in a train set is expected to prevent wheel flats and to reduce maintenance costs.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1157-1166
• /
• 2021

In this study, a numerical sensitivity analysis was performed to determine the fire suppression time for a large number of water mist nozzles in a large fire compartment. Fire simulations were performed using FDS (Fire dynamics simulator) 6.5.2 under the same condition as the test scenario 5 of the International Maritime Organization (IMO) 1165 test protocol. The sensitivities of input parameters including cell size, extinguishing coefficient (EC), droplets per second (DPS), and peak heat release rate (HRR) of fuel were investigated in terms of the normalized HRR and temperature distribution in the compartment. A new method of determining the fire suppression time using FDS simulation was developed, based on the concept of the cut-off time by cut-off value (COV) of the heat release rate per unit volume (HRRPUV) and the cooling time by the HRR cooling time criteria value (CTCV). In addition, a method was developed to determine the average EC value for the simulation input, using the cooling time and cut-off time.

• 한국토양비료학회지
• /
• 제35권6호
• /
• pp.381-386
• /
• 2002

관행시비 (4회 분시)에 비해 완효성 비료 2회 분시가 수량이 12.5% 증수하였으나, 1회 분시는 $6{\pm}3%$ 감소하였다. 관행시비에 비해 완효성 비료 2회 분시가 총질소, 총 아미노산, 엽록소, 비타민 C 함량과 감칠맛 주성분인 theanine, glutamic acid, arginine 함량이 많았고, tannin 함량은 적은 편이였으나, 완효성 비료 1회 분시는 2회분시와는 반대의 경향을 나타냈다. 형상, 향, 맛 등 제다품질은 완효성 비료 2회분시가 1회분시나 관행 시비 4회 분시에 비해 우수하였다. 결론적으로 완효성 비료의 분시효과가 우수한 이유는 비료성분이 서서히 용출되어 나와 효과적으로 작물에 공급되는 한편 비료성분의 손실을 줄일수 있었기 때문으로 판단된다.

• 소성∙가공
• /
• 제31권1호
• /
• pp.29-38
• /
• 2022

Recently, the composite material market is gradually growing. Various composite forming processes have been developed in order to reduce the production cost of the composite material. Unlike the conventional forming process, the microwave composite forming process has the advantage of reducing the processing time because the composite material is heated directly or indirectly at the same time. Due to this advantage, in this study, a double cantilever beam test was conducted with specimens manufactured by the microwave composite forming process. The purpose of this study was to compare mode-I energy release rate for specimens manufactured by prepreg compression forming and microwave composite forming processes. First, a microwave oven was proposed to conduct the microwave composite forming process. Double cantilever beam specimens were manufactured. After that, the double cantilever beam test was conducted to obtain the mode-I energy release rate. Mode-I energy release rates of specimens manufactured by the microwave composite forming and prepreg compression forming processes were then compared. As a result, mode-I energy release rates of specimens fabricated by the microwave composite forming process were similar to those fabricated with the prepreg compression forming process with a relatively reduced process time.

• 한국화재소방학회논문지
• /
• 제32권6호
• /
• pp.28-33
• /
• 2018

건축물 구획공간에 따른 화재성상 및 열방출율을 측정하기 위하여 실물규모 침대 매트리스의 표준화재시험방법(KS F ISO 12949 : 2011)으로 화재시험을 수행하였다. 개방형공간과 구획공간 모두 버너착화 후 초기 약 3분까지는 유사한 화재성장의 경향을 보이는 것으로 확인되었다. 3분후 구획공간에서의 열방출율이 개방형 공간보다 증가되어 높은 것으로 확인되었다. 침대 매트리스(SS)의 경우, 개방형 공간에서의 최대열방출율은 735 kW이며, 구획공간에서의 최대열방출율은 992 kW 로 측정되었다. 침대 매트리스(Q)의 경우 3분후 구획공간에서의 열방출율이 개방형 공간보다 급격하게 증가되는 것으로 확인되었다. 개방형 공간에서의 최대열방출율은 1,087 kW, 이 때의 측정시간은 346s 이며, 구획공간에서의 최대열방출율은 2,127 kW, 이때의 측정시간은 287 s 측정되어 구획공간에 따른 최대열방출율 및 측정시간의 차이가 확인되었다.

• 한국약용작물학회지
• /
• 제11권3호
• /
• pp.190-194
• /
• 2003

두물차의 수량은 관행시비 (4회 분시)에 비해 완효성 비료 9월, 3월 분시 2회 와 3월 1회 분시는 수량차가 없었으나 9월 1회 분시는 감수되었다. 관행시비에 비해 완효성비료 2회 분시가 총 질소, 총 아미노산은 많았고, tannin과 caffeine 함량은 적은 경향이었으며 엽록소, 비타민 C, 유리당 함량과 감칠맛 주성분인 theanine 함량은 차이가 없었다. 형상, 향, 맛 등 제다품질은 완효성 비료 2회 분시가 1회 분시나 관행 시비 (4회 분시)에 비해 우수하였다. 그러나 완효성 비료처리는 토양비료성분 중 질소, 인산, 칼리의 효율성을 향상시켜 차잎 수량 및 품질을 증가시킨다고 생각된다.