• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.9-17
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used superposition which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time. Through this study, in terms of superposition model and simply model, the optimal time to using superposition model release the software developer to determine how much could count will help.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.1
• /
• pp.51-63
• /
• 1989

This paper considers software release problems based on Goel-Okumoto and S-shaped reliability growth models. Test of the software system is terminated after a preassigned time T, and it is released to the operational phase. It is assumed that correction cost of an error is increasing with test or operation time. Optimum software release time is obtained using total expected cost on the software life time as a criterion for optimization. In addition, optimal software release policies under the constraint of a software reliability requirement are discussed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Mechanical Science and Technology
• /
• v.16 no.6
• /
• pp.776-784
• /
• 2002

We have performed experimental studies for the improvements of pneumatic brake systems of freight trains. Currently, most of the freight trains operated by the Korean National Railroad have either empty-load or diaphragm type brake systems. In this study, appropriate methods that the air pressure characteristics in both type of brake systems are in accordance with each other have been investigated. We have also performed running tests using a 30 car-train set to design optimum capacity of a quick release valve. The test results show that the quick release valve is considerably effective in shortening the release time of the diaphragm type brake system. In the case of a normal brake application, the diaphragm type brake system with the quick release valve reduces the release time to 34% of that of the system without the quick release valve. This release time is almost equivalent to that of the empty-load type brake system. Accordance of braking performance in different types of brake systems in a train set is expected to prevent wheel flats and to reduce maintenance costs.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1157-1166
• /
• 2021

In this study, a numerical sensitivity analysis was performed to determine the fire suppression time for a large number of water mist nozzles in a large fire compartment. Fire simulations were performed using FDS (Fire dynamics simulator) 6.5.2 under the same condition as the test scenario 5 of the International Maritime Organization (IMO) 1165 test protocol. The sensitivities of input parameters including cell size, extinguishing coefficient (EC), droplets per second (DPS), and peak heat release rate (HRR) of fuel were investigated in terms of the normalized HRR and temperature distribution in the compartment. A new method of determining the fire suppression time using FDS simulation was developed, based on the concept of the cut-off time by cut-off value (COV) of the heat release rate per unit volume (HRRPUV) and the cooling time by the HRR cooling time criteria value (CTCV). In addition, a method was developed to determine the average EC value for the simulation input, using the cooling time and cut-off time.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.381-386
• /
• 2002

A field experiment was conducted to evaluate the effect of split-application of slow-release fertilizer on the tea plant. The yield of the 1st harvested tea leaves had increased 12% in the slow-release fertilizer(two time split manuring) compared with the traditional manuring(four time split manuring), but that of the slow-release fertilizer to one time split manuring had decreased $6{\pm}3%$. In case of the 1st harvested leave, the contents of chemical components related to quality such as total nitrogen, total amino acid, chlorophyll, vitamin C and theanine were somewhat higher in the leaves of slow-release fertilizer(two time split manuring) treatment than in the traditional manuring, but that of tannin was low. The one time split manuring of slow-release fertilizer had a contrary tendency with two time split manuring treatment. In scoring test, appearance and quality of green tea were more excellent in the two time split manuring compared with one time split manuring of slow-release fertilizer and with the traditional manuring (four time split manuring). Therefore, use of slow-release fertilizer increased yield and quality of tea leaves, and decreased loss of nitrogen, phosphate and potassium.

• Transactions of Materials Processing
• /
• v.31 no.1
• /
• pp.29-38
• /
• 2022

Recently, the composite material market is gradually growing. Various composite forming processes have been developed in order to reduce the production cost of the composite material. Unlike the conventional forming process, the microwave composite forming process has the advantage of reducing the processing time because the composite material is heated directly or indirectly at the same time. Due to this advantage, in this study, a double cantilever beam test was conducted with specimens manufactured by the microwave composite forming process. The purpose of this study was to compare mode-I energy release rate for specimens manufactured by prepreg compression forming and microwave composite forming processes. First, a microwave oven was proposed to conduct the microwave composite forming process. Double cantilever beam specimens were manufactured. After that, the double cantilever beam test was conducted to obtain the mode-I energy release rate. Mode-I energy release rates of specimens manufactured by the microwave composite forming and prepreg compression forming processes were then compared. As a result, mode-I energy release rates of specimens fabricated by the microwave composite forming process were similar to those fabricated with the prepreg compression forming process with a relatively reduced process time.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.28-33
• /
• 2018

To measure the full scale fire test and heat release rate of bed mattresses according to the building compartment space, a fire test was performed using the Standard test method to determine the heat release rate of mattresses and mattress sets (KS F ISO 12949: 2011). Both test locations showed similar fire growth until approximately 3 minutes after burner ignition. After 3 minutes, the heat release rate in the test room was higher than the open calorimeter. For bed mattresses (SS), the maximum heat release rate in the open calorimeter was 735 kW and the maximum heat release rate in the test room was 992 kW. For bed mattresses (Q), the heat release rate in the test room increased more rapidly than the open calorimeter. The maximum heat release rate in the open calorimeter was 1,087 kW (346 s) and the maximum heat release rate in the test room was 2,127 kW (287 s). The difference between the maximum heat release rate and the measurement time according to the test location was confirmed.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.190-194
• /
• 2003

A field experiment was conducted to evaluate effect by split-application of slow-release fertilizer on the tea plant. The yield of the 2nd harvested tea leaves was not different to the slow-release fertilizer of two time split manuring had been doing Sep. or Mar. compared with the traditional manuring had been doing four time split manuring, but that of the slow-release fertilizer to one time split manuring in Sep. had decreased $12.5{\pm}1.5%$. In case of the 2nd harvested leave, the contents of chemical components related to quality such as total nitrogen, total amino acid were somewhat higher in the slow-release fertilizer (two time split manuring) than in the traditional manuring, but those of tannin, and caffeine were low, and those of chlorophyll, vitamin C, free sugar and theanine were not different to out of treatments. In scoring test, appearance and quality of green tea were more excellence in the two time split manuring compared with one time split manuring of slow-release fertilizer and with the traditional manuring (four time split manuring). Therefore, I thought that use of slow-release fertilizer be increased yield and quality of tea leaves, and improved efficiency nature of nitrogen, phosphate and potassium out of soil fertilizer components.