• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.84-92
• /
• 2015

Multi-hop relay networks have been widely considered as a promising solution to extend the coverage area and to reduce the deployment cost by deploying the relay stations (RSs) in mobile communication systems. Suitable deployment for the RSs is one of the most important features of the demand nodes (DNs) to obtain a high data transmission rate in such systems. Considering a tradeoff among the network throughput, the deployment budget, and the overall coverage of the systems, efficient RS deployment schemes and corresponding algorithms must be developed and designed. A novel cluster-based RS deployment scheme is proposed in this paper to select the appropriate deployment locations for the relay stations from the candidate positions. To make an ideal cluster distribution, the distances between the DNs are calculated when deploying the RSs. We take into account the traffic demands and adopt a uniform cluster concept to reduce the data transmission distances of the DNs. On the basis of the different candidate positions, the proposed scheme makes an adaptive decision for selecting the deployment sites of the RSs. A better network throughput and coverage ratio can be obtained by balancing the network load among the clusters. Simulation results show that the proposed scheme outperforms the previously known schemes in terms of the network throughput and the coverage ratio. Additionally, a suitable deployment budget can be implemented in multi-hop relay networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.594-599
• /
• 2010

This paper studies the effect of the deployment position of the relay stations on the downlink signal-to-interference-noise-ratio (SINR) in multihop cellular networks. Two different relay deployment scenarios are considered where relay stations are located either inside cells or on the boundary among adjacent cells. The fundamental contribution is to compare fairly the average SINR between two scenarios with the proposed relay modeling framework that includes multi-cell geometries and inter-cell interferences. The mathematical results show that the SINR increases when relay stations are located inside cells because of higher received signal power.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.2098-2117
• /
• 2012

This paper jointly investigates the bandwidth allocation, transmission strategy and relay positions for two-way transmission aware cellular networks with network coding (NC). Our goal is to minimize the transmission power of mobile terminals (MTs). Consider a cellular system, where multiple MTs exchange information with their common base station, firstly, we propose an efficient bandwidth allocation method and then give a transmission strategy for each MT to determine whether to use relay stations (RSs) for its two-way transmission with the BS or not. To further improve the system performance, the optimal positions of RSs are also jointly discussed. A GA-based algorithm is presented to obtain the optimum positions for RSs. Besides, the impacts of frequency reuse on MT's transmission power and system spectral efficiency (SE) under different number of relays are also discussed in our work. Numerical results show that the proposed NC aware scheme can extend MTs' battery life at least 6% more than traditional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.227-238
• /
• 2012

In this paper, we propose a practical time-division half-duplex Estimate and Forward (EF) relaying protocol. The conventional EF relaying protocol works well only when the relay node is near the destination node. The proposed EF relaying protocol, however, determines adaptively relay parameters such as the quantization level of relay node and the power allocation between source and relay nodes according to the channel conditions. By doing so, the proposed EF relaying protocol provides low probability of bit error even when the relay node is far from the destination node. Consequently, the proposed EF protocol is suitable for the mobile relay systems. It is shown by simulations that the proposed EF relaying protocol shows lower bit error rate for all relay positions than a conventional EF protocol.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.466-473
• /
• 2011

This paper proposes a protection algorithm for a wind turbine generator (WTG) in a large wind farm. To minimize the outage section, a protection relay for a WTG should operate instantaneously for an internal fault or a connected feeder fault, whereas the relay should not operate for an internal fault of another WTG connected to the same feeder or an adjacent feeder fault. In addition, the relay should operate with a delay for an inter-tie fault or a grid fault. An internal fault of another WTG connected to the same feeder or an adjacent feeder fault, where the relay should not operate, is determined based on the magnitude of the positive sequence current. To differentiate an internal fault or a connected feeder fault from an inter-tie fault or a grid fault, the phase angle of the negative sequence current is used to distinguish a fault type. The magnitude of the positive sequence current is then used to decide either instantaneous operation or delayed operation. The performance of the proposed algorithm is verified under various fault conditions with EMTP-RV generated data. The results indicate that the algorithm can successfully distinguish instantaneous operation, delayed operation, or non-operation depending on fault positions and types.

• Journal of Communications and Networks
• /
• v.12 no.5
• /
• pp.466-474
• /
• 2010

Various types of cooperative relaying (CR) schemes exhibit different levels of throughput and outage performance because of their inherent trade-off between diversity gain and opportunity cost; in other words, the overhead that is associated with cooperation. This article attempts to answer whether cooperative communication is beneficial or not from the system-level viewpoint and furthermore, if it is, how its average throughput can be maximized while maintaining the target outage rate. In order to improve throughput at the required outage performance, we propose a unified selection criterion to deal with different levels of combining gain and opportunity cost associated with each scheme, which allows for the employment of different CR schemes for various positions of the mobile station. Our system-level simulation results for an IEEE 802.16j multi-hop relay confirm the varying levels of trade-offs among different CR schemes and furthermore, show that CR will be a useful means of maximizing the average throughput for a multi-hop relay system as long as each type of the cooperating scheme is carefully selected, depending on the position of the mobile stations.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.62-67
• /
• 2007

In some wireless sensor networks, the sensor nodes are required to be located sparsely at designated positions over a wide area, introducing the problem of adding minimum number of relay nodes to interconnect the sensor nodes. The problem finds its form in literature: the Minimum number of Steiner Points. Since it is known to be NP-hard, this paper proposes an approximation scheme to estimate the minimum number of relay nodes through the properties of the abstract from. Reducing the number of nodes in a sensor network, the amount of data exchange over the net will be far decreased.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.11 no.4
• /
• pp.1-8
• /
• 2007

In some wireless sensor networks, the sensor nodes are required to be located sparsely at designated positions over a wide area, introducing the problem of adding minimum number of relay nodes to interconnect the sensor nodes. The problem finds its a bstract form in literature: the Minimum number of Steiner Points. Since it is known to be NP-hard, this paper proposes an approximation scheme to estimate the minimum number of relay nodes through the properties of the abstract form. Note that by reducing the numb er of nodes in a sensor network, the amount of data exchange over the net will be far decreased.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.8
• /
• pp.1388-1403
• /
• 2011

A vehicular ad-hoc network (VANET) consists of vehicles that form a network without any additional infrastructure, thus allowing the vehicles to communicate with each other. VANETs have unique characteristics, including high node mobility and rapidly changing network topology. Because of these characteristics, routing algorithms based on greedy forwarding such as greedy perimeter stateless routing (GPSR) are known to be very suitable for a VANET. However, greedy forwarding just selects the node nearest to the destination node as a relay node within its transmission range. This increases the possibility of a local maximum and link loss because of the high mobility of vehicles and the road characteristics in urban areas. Therefore, this paper proposes a reliability-improving position-based routing (RIPR) algorithm to solve those problems. The RIPR algorithm predicts the positions, velocities, and moving directions of vehicles after receiving beacon messages, and estimates information about road characteristics to select the relay node. Thus, it can reduce the possibility of getting a local maximum and link breakage. Simulation results using ns-2 revealed that the proposed routing protocol performs much better than the existing routing protocols based on greedy forwarding.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.12A
• /
• pp.941-948
• /
• 2009

In the 3GPP LTE systems, SC-FDMA is adopted for the uplink owing to its good PAPR efficiency. In the frequency domain, however, the performance of SC-FDMA is degraded due to frequency selective fading. As a compromise, a Hybrid OFDMA/SC-FDMA was proposed in the LTE-Advanced systems. Hybrid scheme uses SC-FDMA in the edge of cell area, while it uses OFDMA nearby the base-station. In this paper, uplink relays based on hybrid scheme is proposed to increase the performance of the 3GPP LTE systems. With different positions of mobile and relay, the proposed scheme can adaptively select SC-FDMA or OFDMA to improve the link performance. Our simulation results show that the proposed scheme achieves a better performance in terms of end-to-end BER and power consumption.