• 대한전기학회논문지
• /
• 제43권7호
• /
• pp.1144-1151
• /
• 1994

The humidity-sensitive specimens-(BaS11T-S1xTCaS1xT)TiOS13T, x=0, 0.1, 0.2, 0.3, 0.4, 0.5-were fabricated by a solid-state reaction method which is easy in process control of microstructure and good in mass production, and their humidity-sensitive characteristics were examined. Ca inhibits grain growth and the open porosity increases with Ca substitution, and the specimens at x=0.5 show the best humidity sensitivity. Their humidity sensitivity is higher at the lower frequencies, and drift phenomenon in humidity sensitivity is exhibted with aging in the air, which disappears by a heat treatment. The electrical conduction with water adsorption is dominated by the ions, and the activation energy decreases with increasing relative humidity.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.351-357
• /
• 2006

In this study, quantitative sensitivity analysis on rockfill material influencing the dam crest displacement of Concrete-Faced Rockfill Dam(CFRD) subjected to earthquake loading was carried out. The purpose of this study is to indicate the most important input parameter and to show the quantitative variation of displacement at the crest of CFR type dam during earthquake loading with this input parameter. From the sensitivity analysis, it was found that the crest displacement of CFR type dam subjected to dynamic loading was absolutely affected by the shear modulus of rockfill material and the effect of friction angle of it was negligible. This relative difference of sensitivity was more outstanding in case of crest settlement than in case of crest horizontal displacement. Also, it was found that the extent of effect of shear modulus on the displacement at the crest of CFRD due to dynamic loading decreased as maximum amplitude of input acceleration increased.

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권10호
• /
• pp.5149-5153
• /
• 2012

Introduction: This study assessed the relationship of E-cadherin mRNA and protein expression with the diagnosis of lung cancer with the aim of providing an auxiliary diagnostic method. Methods: Semi-quantitative nested RT-PCR and western blotting were applied to detect E-cadherin mRNA transcripts and protein, respectively, in 30 cases of diagnostic lung cancer, 30 cases of clinically suspected patients with lung cancer and 30 cases of other disease. Immunohistochemical staining was also used to detect E-cadherin. Results: Remarkably decreased levels of relative E-cadherin mRNA value and increased E-cadherin protein negativity were observed in probable lung cancer, when compared with possible lung cancer and others. With a threshold of 1.45, relative E-cadherin mRNA value showed a sensitivity of 90% and a specifity of 83% for the diagnosis of lung cancer. The combination of decreased relative E-cadherin mRNA value and negative E-cadherin protein increased the specificity and sensitivity. Conclusion: These data suggest that Chinese patients with diagnostic lung cancer have similar decreased levels of relative E-cadherin mRNA and E-cadherin protein value in the lung cancer tissues as in lung cancer patients in other countries. Measurement of relative E-cadherin mRNA and protein values in lung cancer tissues has potential for lung cancer diagnosis.

• 센서학회지
• /
• 제21권6호
• /
• pp.440-445
• /
• 2012

Contact-type Linear Encoder-like Capacitive Displacement Sensor (CLECDiS) is a novel displacement sensor which has wide measurable range with high resolution. The sensor, however, is very sensitive to relative rotational alignment between stator and mover of the sensor as well as its displacement. In addition to, there can be some disturbances in the relative rotational alignment, so some noises occur in the sensor's output signal by the disturbances. This negative effect of the high sensitivity may become larger as increasing sensitivity. Therefore, this negative effect of the high sensitivity has to be compensated and reduced to achieve nanometer resolution of the sensor. In this study, a new type capacitive linear encoder with a mechanical guide is presented to reduce the relative rotational alignment problem. The presented method is not only to reduce the alignment problem, but also to assemble the sensor to the stage conveniently. The method is based on a new type CLECDiS that has mechanical guide autonomously. In the presented sensor, when the device is fabricated by micro-machining, the guide-rail is also fabricated on the surface of the sensor. By the direct fabrication of the guide-rail with high precision micro-machining, errors of the guide-rail can be reduced significantly. In addition, a manual yaw alignment is not required to obtain large magnitude of the output signal after the assembly of the sensor and the stage. The sensor movement is going to follow the guide-rail automatically. The prototype sensor was fabricated using the presented method, and we verify the feasibility experimentally.

• 한국토양비료학회지
• /
• 제32권3호
• /
• pp.268-273
• /
• 1999

토지이용 유형과 유효인산 함량이 다양한 56개 토양을 대상으로 범용 분광광도계를 사용한 Lancaster법과 분석과정 및 측정과정을 간편화시킨 Soiltek$^{(R)}$ KA-1에서 제시하는 방법으로 측정한 유효인산함량에 대하여 정확도 및 정밀도를 비교 분석하였다. 두 방법으로 분석된 인산함량은 고도의 유의성 있는 정의상관 ($r=0.998^{***}$)을 보였으며, 기울기는 0.97로 거의 일치하여 두 방법간의 정확성은 차이가 없었다. 또한, 두 방법으로 측정된 인산함량 분석결과의 표준편차, CV, 상대정밀도(RS)는 거의 차이가 없으므로 정밀도에서도 차이가 없었다. 따라서, 분석과정 및 기기조작의 편리성 및 신속성을 고려한다면 Soiltek$^{(R)}$ KA-1에서 제시하는 방법으로 유효인산 함량을 측정하는 것도 유용한 방법이라고 생각된다.

• Nuclear Engineering and Technology
• /
• 제37권6호
• /
• pp.605-610
• /
• 2005

A method to estimate the relative sensitivity of a self-powered rhodium detector for an upcoming cycle is developed by combining the rhodium depletion data from a nuclear design with the site measurement data. This method can be used both by nuclear power plant designers and by site staffs of Korean standard nuclear power plants for determining which rhodium detectors should be replaced during overhauls.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.93-99
• /
• 1996

The formation properties and oxidation mechanism of electrochemically oxidized porous silicon(OPS) films have been studied. To examine the humidity-sensitive properties of OPS films, surface-type and bulk-type humidity sensors were fabricated. The oxidized thickness of porous silicon layer(PSL) increases with the charge supplied during electrochemical humidity sensor shows high sensitivity at high relative humidity in low temperature. The sensitivity and linearity can be improved by optimizing a porosity of PSL. (author). refs., figs.

• Radiation Oncology Journal
• /
• 제17권3호
• /
• pp.256-260
• /
• 1999

목적 : 얇은 박막을 위에 얹은 TLD 선량계의 반응 값에 영향을 미치는 인자를 조사하였고, 특히, 금속박막을 얹은 TLD 선량계의 광자에너지와 표면 흡수선량에 대한 의존성을 조사하였다. 방법 및 재료 : 본 연구에서는 TLD-100과 TLD-100 위에 얹은 Slt은 물질로는 주석, 금, 그리고 TE 플라스틱 판을 사용하였다. 각 금속 박막의 두께는 0.1 mm, TE 플라스틱 판의 두께는 1 mm였고 각 박막의 면적은 TLD-100의 면적과 같이 하였다. 방사선치료에 많이 산이는 6 MV에서 15 MV사이의 광자에너지에 대한 TLD-100의 반응감도와 금박막을 얹은 TLD-100의 반응감도, 그리고 주석 박막을 얹은 TLD-100의 반응감도를 비교해 보았다. 결과 : 금속 박막을 얹은 TLD의 경우 표면 흡수선량의 증가가 명백히 나타나고, 금 박막을 얹은 TLD의 경우 10MV에서 정상 TLD보다 약 1.83배 정도 과잉 반응하는 것으로 관측되었으며, 흡수선량에 따른 반응감도의 변화는 주석을 얹은 TLD의 경우가 가장 작았다 금속 박막을 얹은 TLD의 일반 TLD에 대한 상대 반응감도는 에너지에 대한 의존성을 거의 나타내지 않았다. 그리고 311은 박막의 조직에 대한 등가 두께에 따라 반응감도가 증가하였다. 결론 : 금속박막을 얹은 TLD 선량계의 반응값이 고 에너지(6-15 MV)에 대한 의존성을 거의 나타내지 않았으며, 흡수선량에 대한 선형성도 뛰어난 것으로 관측되었다. 따라서 금속박막을 얹은 TLD 선량계는 매우 작은 크기의 광자빔과 표면흡수선량의 측정에 매우 적합한 것으로 사료된다.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.143-150
• /
• 2003

Frictional properties of ultra-thin carbon coatings on silicon wafer were investigated based on Taguchi experimental design method. Sensitivity analysis was performed with normal load, relative humidity, deposition process, and coating thickness as the variables. It was found that despite low thickness, the carbon coating resulted in relatively low friction coefficient. Also, the frictional behavior was affected significantly by humidity and normal load.

• 대한의용생체공학회:의공학회지
• /
• 제21권3호
• /
• pp.295-301
• /
• 2000

뼈의 성장에 미치는 많은 요소들 중에서 implant의 상대적인 미세운동(relative micromotion)은 뼈의 implant와의 접합을 방해하는 것으로 알려져 왔다. 그런데 이러한 상대적인 운동 및 spinal stability에 직접적으로 영향을 주는 하중조건, spinal material의 물성치, spinal geometry 및 뼈와 implant의 접촉면에서의 마찰계수를 고려하기 위하여, 하나의 titanium interbody cage 가 삽입된 human lumbar segments (L4-L5)의 유한요소 모델이 개발되었다. 이러한 유한요소 모델의 해석을 통하여 상대적인 미세운동, Posterior의 수직적인 변위, von Mises 응력 및 마찰력이 예측되었다. Cancellous bone. annulus fibers 및 ligaments의 기계적인 물성치의 감소 또는 접촉면에서의 마찰계수의 감소는 상대적인 미세운동 (relative micromotion or slip distance)을 증가 시켰다. 접촉면에서의 normal force는 뼈의 밀도 (cancellous bone density) 가 감소하거나 접촉마찰계수가 증가하면 감소했다. 특히 하중조건에 있어서, compressive preload에 대한 torsion의 추가는 접촉면의 anterior부위에서 상대적인 미세운동을 증가 시켰다. 하지만 디스크면적이 증가할수록 상대적인 미세운동은 감소했다. 결론적으로, 접촉면의 기계공학적 거동 (Relative micromotion, stress response, posterior axial displacement and contact normal force)은 접촉면의 마찰계수 뼈의 밀도, 하중조건 및 노화에 따른 형상/물성의 변화에 매우 민감함을 보이고있다.