본 논문에서는 Inmarsat M4 시스템의 수신기의 실제 구현에 적합한 16-QAM (Quadrature Amplitude Modulation) carrier recovery loop를 제안한다. Inmarsat M4 시스템 규격에서 권고하는 frequency tolerance는 ${\pm}924\;Hz$ (Signal bandwidth: 33.6 kHz) 로서 이러한 상대적으로 큰 주파수 옵셋 환경에서 안정된 동작이 가능한 carrier recovery loop 설계가 요구된다. 일반적인 PLL(Phase Locked Loop) 만을 이용한 carrier recovery loop는 상대적으로 큰 주파수 옵셋 환경에서 안정적인 성능을 보장할 수 없으며, 이에 따라 본 논문에서는 상대적인 주파수 옵셋이 큰 환경에서도 안정적이 동작이 가능한 Inmarsat M4 시스템을 위한 carrier recovery loop 루프를 제안한다. 제안된 carrier recovery loop는 우선 carrier recovery 이전에 UW 신호 detection 을 위해 주파수 옵셋에 강인한 differential filter 기반의 noncoherent 방식의 detector를 이용하여 UW detection을 수행하였으며, 이후 초기 주파수 옵셋 포착을 위해 UW(Unique Word) 신호를 이용한 차동 방식의 CP(Cross Product)-AFC를 적용하였다. 또한 일반적으로 알려진 16-QAM NDA (Non Data Aided) 방식 대신 안정적인 jitter 성능을 위하여 16-QAM DD(Decision Directed) 방식의 PLL 을 적용하여 위상 추적을 수행하였으며, 성능 검증을 통해 제안된 16-QAM carrier recovery loop가 만족스러운 성능과 신뢰성 있는 동작이 가능함을 입증하였다.
높은 해상도를 갖는 UWB 신호는 무선 개인영역망에서 거리추정 및 위치추정에 사용된다. 이들 노드는 국부클럭으로 동작하고, 노드간의 클럭 주파수 차이는 이동노드의 위치를 추정하는 거리추정 알고리즘에 심각한 영향을 미친다. IEEE802.15.4a의 저속 UWB에서는 추가적인 망동기의 도움 없이 수행하는 TWR 및 SDS-TWR의 비동기 양방향 거리추정 방식을 기술하고 있으나 클럭 주파수차이의 영향을 없애지는 못하고 있다. 그러므로 UWB 물리기능에 두 노드의 수정발진기 주파수 차이를 추정하는 방식이 필요하다. 고속 UWB에서는 추적회로를 사용한 수정발진기 편이 추정이 표준에 별도로 요구되지 않고 있다. 그러나 잡음이 없는 환경에서는 노드간의 수정발진기 편이 추정이 가능하다. 본 논문에서는 상대주파수 편이를 사용하여 TWR 기반의 거리추정 수식을 유도하였으며, 이상적인 수식에서의 잔여 오차를 분석하였다. 또한 시뮬레이션으로 상대주파수 편이 알고리즘의 성능을 평가하고, TWR 횟수에 따른 거리추정오차를 분석하였다. 결과적으로 클럭 해상도가 낮더라도 다수의 TWR을 사용한 상대주파수 편이 보상 방식에 의하여 거리추정오차의 성능이 개선됨을 알 수 있다.
WPAN에서는 해상도가 높은 UWB 신호를 사용하여 노드 간의 거리를 추정하고 이로부터 이동노드의 위치를 추정한다. 비동기 거리추정 방식은 고정노드와 이동노드 간에 비동기 상태에서 노드간의 거리를 추정하는 바 각 노드 국부클럭의 주파수 차이에 의한 영향이 심각하다. 고속 UWB에서는 각 노드 국부클럭의 주파수 차이에 의한 영향을 감소시키기 위하여 비동기 TWR 방식을 연속으로 수행하고, 상대주파수 편이 보상방안을 제시하고 있다. 본 논문에서는 고속 UWB의 상대주파수 편이 보상 수식을 완성하고, 이를 적용하는데 대한 문제점을 분석하고, 정확한 주파수편이 보상 방안을 제안한다. 거리추정 방식은 원래의 TWR, 상대주파수 편이 보상 및 정확한 주파수 편이 보상 방식에 의한 TWR에 대하여 시뮬레이션으로 성능을 분석하였다. 상대주파수편이 방식과 정확한 주파수편이 방식은 잡음이 없는 상태에서는 유사한 성능을 나타내었다. 제안된 정확한 주파수 편이 방식은 SNR이 열악한 환경에서 상대주파수 편이 보상 방식보다 정확한 거리를 추정하는 것을 확인하였다.
The KOMPSAT-2 satellite is a push-broom system with MSC (Multi Spectral Camera) which contains a panchromatic band and four multi-spectral bands covering the spectral range from 450nm to 900nm. The PAN band is composed of six CCD array with 2528 pixels. And the MS band has one CCD array with 3792 pixels. Raw imagery generated from a push-broom sensor contains vertical streaks caused by variability in detector response, variability in lens falloff, pixel area, output amplifiers and especially electrical gain and offset. Relative radiometric calibration is necessary to account for the detector-to-detector non-uniformity in this raw imagery. Non-uniformity correction (NUC) is that the process of performing on-board relative correction of gain and offset for each pixel to improve data compressibility and to reduce banding and streaking from aggregation or re-sampling in the imagery. A relative gain and offset are calculated for each detector using scenes from uniform target area such as a large desert, forest, sea. In the NUC of KOMPSAT-2, The NUC table for each pixel are divided as HF NUC (high frequency NUC) and LF NUC (low frequency NUC) to apply to few restricted facts in the operating system ofKOMPSAT-2. This work presents the algorithm and process of NUC table generation and shows the imagery to compare with and without calibration.
대한원격탐사학회 2008년도 International Symposium on Remote Sensing
/
pp.277-280
/
2008
Enhancing the positioning precision is the primary pursuit of GPS users. To achieve this goal, most studies have focused on the relationship between GPS receiver clock errors and GPS positioning precision. This study utilizes undifferentiated phase data to calculate GPS clock errors and to compare with the frequency of cesium clock directly, thus verifying estimated clock errors by the method used in this paper. The relative frequency offsets from this paper and from National Standard Time and Frequency Laboratory of Taiwan match to $1.5{\times}10^{12}$ in the frequency instability, suggesting that the proposed technique has reached a certain level of quality. The built-in quartz clocks in the GPS receivers yield relative frequency offsets that are 3 to 4 orders higher than those of rubidium clocks. The frequency instability of the quartz clocks is on average two orders worse than that of the rubidium clock. Using the rubidium clock instead of the quartz clock, the horizontal and vertical positioning accuracies were improved by 26-78% (0.6-3.6 mm) and 20-34% (1.3-3.0 mm), respectively, for a short baseline. These improvements are 7-25% (0.3-1.7 mm) and 11% (1.7 mm) for a long baseline. Our experiments show that the frequency instability of clock, rather than relative frequency offset, is the governing factor of positioning accuracy.
Lee, Ho Seong;Kwon, Taeg Yong;Lee, Young Kyu;Yang, Sung-hoon;Yu, Dai-Hyuk;Park, Sang Eon;Heo, Myoung-Sun
Journal of Positioning, Navigation, and Timing
/
제10권3호
/
pp.197-206
/
2021
We compared two typical ensemble time scale algorithms; AT1 and Kalman filter. Four commercial atomic clocks composed of two hydrogen masers and two cesium atomic clocks provided measurement data to the algorithms. The allocation of relative weights to the clocks is important to generate a stable ensemble time. A 30 day-average-weight model, which was obtained from the average Allan variance of each clock, was applied to the AT1 algorithm. For the reduced Kalman filter (Kred) algorithm, we gave the same weights to the two hydrogen masers. We also compared the frequency stabilities of the outcome from the algorithms when the frequency offsets and/or the frequency drift offsets estimated by the algorithms were corrected or not corrected by the KRISS-made primary frequency standard, KRISS-F1. We found that the Kred algorithm is more effective to generate a stable ensemble time scale in the long-term, and the algorithm also generates much enhanced short-term stability when the frequency offset is used for the calculation of the Allan deviation instead of the phase offset.
9.2GHz 주파수 차이로 위상잠금(phase-locking)된 레이저 시스템을 제작하여 그 특성을 조사하였다. 외부공진기 다이오드 레이저 2대를 제작하고, 두 레이저가 9.2GHz 주파수 차이를갖도록 디지털 회로를 이용하여 위상잠금 하였다. 위상잠금된 두 레이저의 맥놀이 신호의 스펙트럼을 측정하였으며, 이로부터 신호의 반송률이 약 93%임을 알 수 있었다. 위상잠금된 두 레이서의 상대 선폭은 2Hz 이하였다. 위상잠금된 두 레이저의 맥놀이 신호의 위상잡음을 측정하였으며, 측정된 위상잡음 스펙트럼으로부터 적분시간 1s 이하에서 상대적인 주파수 안정도를 계산하였다. 적분시간 1s 이상에서는 주파수 측정방법으로 상대적인 주파수 안정도를 측정하였는데, 적분시간 20s 에서 알란편차는 $2.7{\times}10^{-19}$였다.
본 논문은 UWB (Ultra Wide Band) 시스템의 성능 개선을 위해서 Superframe 주기를 이용한 MAC(Medium Access Control) 계층 time slot 동기 알고리즘을 제안한다. Multi-band ORM Alliance (MBOA) 에서 제안한 UWB시스템에서는 Time Slot의 동기를 위해서 Medium Access Slot (MAS) 와 MAS사이의 guard time에 단말기들 간의 MAC 계층 주파수 오프셋으로 야기될 수 있는 시간 오차의 최대값인 MaxDrift를 더해주게 된다. MaxDrift를 더한 만큼 MAS에서 데이터를 전송할 수 있는 시간이 줄어들게 되므로 각각의 MAS에 MaxDrift를 더해주는 방식은 전체 시스템 성능의 저하를 가져오게 된다. 본 논문에서는 시스템의 성능을 높이고자 time slot동기를 guard time을 증가시키는 방식이 아닌, Superframe주기로 전송되는 연속된 Beacon Frame을 수신하여 주파수 오프셋 값을 estimation하여 보정해주는 방법을 제안한다. Piconet을 초기화시킨 Device는 내부 clock을 이용해서 Superframe주기로 Beacon을 전송을 하므로, Piconet에 접속하려는 단말기들은 연속된 Beacon을 수신하여 Piconet을 생성한 단말기의 MAC계층과 수신한 단말기와의 MAC계층 주파수 오프셋을 구할 수 있다. 각각의 수신 단말기에서 측정한 상대적 주파수 오프셋 값을 내부적으로 estimation한 각각의 MAS의 position에 가감시켜 Piconet을 생성한 단말기에서 estimation한 MAS position에 동기를 맞출 수 있다. 제안된 알고리즘을 통해서 단말기들 간의 최대 주파수 오프셋 값과 관계없이 MaxDrift로 인해서 낭비되는 시간을 각 MAS당 1clock 이내로 줄일 수 있다. 제안된 알고리즘을 하드웨어로 합성한 결과 390개의 Logic Cell이 소모되었으며, 시뮬레이션 결과 최대주파수 오프셋이 20ppm, 40ppm, 80ppm일 때 MAS당 오차범위가 main clock의 1clock이내였으며 기존의 방법에 비해서 각각 1%, 2%, 4%의 throughput이 향상되었다.
3GPP의 LTE/LTE-Advanced 시스템은 OFDM(Orthogonal Frequency Division Multiplexing) 기술적용으로 주파수 할당에 의한 간섭분석 및 주파수 공유평가가 중요하다. 이에 본 논문에서는 LTE 두 사업자/시스템간의 인접채널 간섭 분석에 의한 주파수 공유연구를 수행하였다. 업링크 및 다운링크에서의 시스템 용량 및 스루풋(throughput) 손실에 대한 시뮬레이션 분석이 이루어져 5% 손실율의 주파수 공유기준으로 요구되는 ACIR(Adjacent Channel Interference Ratio) 값을 정의하였다. 유저(user)의 위치, 간섭 대역폭, 시스템 분리 옵셋(separation offset) 등의 파라미터들에 의해 주파수 공유를 위해 요구되는 ACIR 값에 미치는 영향이 분석되었으며, 이러한 결과 데이터 및 간섭분석 방법들은 향후 LTE RF 표준 및 주파수 유효이용에 참고자료로 활용될 것이다.
JSTS:Journal of Semiconductor Technology and Science
/
제15권2호
/
pp.202-207
/
2015
A CMOS relaxation oscillator, with high robustness over process, voltage and temperature (PVT) variations, is designed in $0.18{\mu}m$ CMOS. The proposed oscillator, consisting of full-differential charge-discharge timing circuit and switched-capacitor based voltage-to-current conversion, could be expanded to a simple open-loop frequency synthesizer (FS) with output frequency digitally tuned. Experimental results show that the proposed oscillator conducts subcarrier generation for frequency-modulated ultra-wideband (FM-UWB) transmitters with triangular amplitude distortion less than 1%, and achieves frequency deviation less than 8% under PVT and phase noise of -112 dBc/Hz at 1 MHz offset frequency. Under oscillation frequency of 10.5 MHz, the presented design has the relative FS error less than 2% for subcarrier generation and the power dissipation of 0.6 mW from a 1.8 V supply.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.