• Korean Journal of Community Nutrition
• /
• v.28 no.5
• /
• pp.404-413
• /
• 2023

Objectives: This study compared serum lipid concentration according to drinking habits. Methods: We analyzed data from the 7th Korea National Health and Nutrition Examination Survey (KNHANES VII). The study included 8,525 adults (3,651 males and 4,874 females), aged 30 - 59 years. Results: There were differences in age, gender, education level, smoking status, physical activity, and waist circumference between drinkers and abstainers. The serum low-density lipoprotein-cholesterol (LDL-C) level of the drinkers was lower than those of the abstainers (P < 0.05). The serum triglyceride (TG) and high-density lipoprotein-cholesterol (HDL-C) concentrations were highest in the group that consumed alcohol 'more than twice a week' relative to the other groups (P < 0.001). The LDL-C and atherogenic index (AI) levels were lowest in the 'more than twice a week' drinking group compared to the other groups (P < 0.001). The serum TG and HDL-C concentrations were the highest in the '7 glasses/time' group (P < 0.001). The serum LDL-C concentration was the lowest in the '7 glasses/time' group (P < 0.001). Notably, the higher the frequency of binge drinking (7 glasses or more), the higher the concentration of TG (P < 0.001). The serum HDL-C concentration was significantly higher in the 'no binge' and 'more than once a week' groups compared to the other groups (P < 0.001). The serum LDL-C concentration and AI score were the lowest in the 'more than once a week' group (P < 0.001). Conclusions: As the quantity and frequency of drinking increased, the serum TC concentration increased. Moreover, an increase in the serum HDL-C concentration led to a decrease in AI. The factors exacerbating cardiovascular disease increased simultaneously due to drinking. Our results suggest that for individuals with hypertriglyceridemia and patients with low HDL-cholesterolemia, separate guidelines based on the quantity and frequency of alcohol consumption are warranted.

• Journal of Korean Society of Forest Science
• /
• v.81 no.4
• /
• pp.303-309
• /
• 1992

This study eras carried out to investigate the ecological changes on the plant community at erosion controlled area in Yoju-gun, Kyonggi-do. The results of the study were as follows : 1. The depth of organic matters in the soil profile from 4 to 14 years was estimated to be $Y_{(cm)}=0.436X_{(yr)}-0.931$(r=0.978), and 02 layer was $Y_{(cm)}=0.339_{(yr)}-0.931$ (r=0.954). 2. On upper plant layer. Alnus spp. was decreased, on an average, 32% of relative coverage, 12.4% of relative density and 16.8% of relative frequency in each plot for 3 years, as this area was damaged by Agelastica coerulea Baly for 2-3 years. 3. On upper plant layer, relative coverage of Pinus spp. was increased after 6, 7 years in erosion controlled area and was taked the highest plant (more then 40%) from 10 to 14 years. 4. On lower plant layer, relative density of Quercus ssp. (these species has not been planted and sown on erosin controlling) was increased all the plot. 5. The increase of the whole crown projection area was estimated to be $Y_{(m^2)}=18.020X_{(yr)}+18.834$(r=0.954) 6. The biomass was estimated to be 14.88t/ha on elapsed 6 years, 22.84t/ha on 8 years, 35.08t/ha on 10 years, 47.80t/ha on 12 years, 58.13t/ha on 14 years.

• The Korean Journal of Ecology
• /
• v.16 no.3
• /
• pp.329-339
• /
• 1993

Effects of relative light intensity and N, P fertilization on the growth and ramet dynamics of the rhizomatous plants, Arundinella hirta, Miscanthus sinensi and Spdiopogon sibiricus were studied in Chuncheon, Kangweon-Do. Ramets emerged in one pulse a year, withered in one pulse at the end of the growing season in M. sinensis and S. sibircus stands, while the birth and death pulse in A. hirta stands were two times. Total births of ramet were 9 times and 3.6 times greater in the unshaded fertilized stands of A. hirta and M. sinensis than in the shaded, However, those of S.sibiricus were 2.1 times greater in the shaded stands. Flowering rates of A. hirta, M.sinensis and S.sibiricus I the unshaded fertilized stands were 1.8, 2.7 and 1.04 times greater than in the shaded unfertilized stands, respectively. Height of ramets of A. hirta and M.sinensis were the hightest in the unshaded fertilized stands. However, that of s.sibiricus was the highest in the shaded fertilized stand. Aboveground production of A.hirta in the fertilized stand was 2.4 times greater in the unshaded stand than in the shaded one. Results of inflorescence frequency, shoot height and the ratio of aboveground to belowground were smiliar to the total births. The added fertilizer markedly increased the ramet density and the shoot productivity of three rhizomatous plants, especially of A. hirta.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.201-207
• /
• 2017

An electron-excited temperature ($T_{ex}$) is not determined by the Boltzmann plots only with the spectral data of $4p{\rightarrow}4s$ in an Ar-plasma jet operated with a low frequency of several tens of kHz and the low voltage of a few kV, while $T_{ex}$ can be obtained at least with the presence of a high energy-level transition ($5p{\rightarrow}4s$) in the high-voltage operation of 8 kV. The optical intensities of most spectra that are measured according to the voltage and the measuring position of the plasma column increase or decay exponentially at the same rate as that of the intensity variation; therefore, the excitation temperature is estimated by comparing the relative optical-intensity to that of a high voltage. In the low-voltage range of an Ar-jet operation, the electron-excitation temperature is estimated as being from 0.61 eV to 0.67 eV, and the corresponding radical density of the Ar-4p state is in the order of $10^{10}{\sim}10^{11}cm^{-3}$. The variation of the excitation temperature is almost linear in relation to the operation voltage and the position of the plasma plume, meaning that the variation rates of the electron-excitation temperature are 0.03 eV/kV for the voltage and 0.075 eV/cm along the plasma plume.

• The Journal of Korean Society for School & Community Health Education
• /
• v.21 no.3
• /
• pp.1-19
• /
• 2020

Objectives: This study was attempted to examine the relationship between hand grip strength and dyslipidemia. and it was analyze the effect of hand grip strength on dyslipidemia and discuss the problems that may occur. Methods: The study focused on 'the National Health and Nutrition Survey's 7th Year 1, 2, and 3 (2016-2018)' as their primary data. Among people who measured dyslipidemia and relative hand grip strength, 12,636 people were selected as the final study after excluding missing values. Frequency analysis, mean analysis, and regression analysis was used to determine dyslipidemia and hand grip strength indices according to the subjects' characteristics study and verify the research hypothesis. Results: Outcomes show that 4,542 (35.9%) of the subjects were dyslipidemia, and when the hand grip strength of the subjects increased by 1kg, Dyslipidemia decreased by 0.217 less. The result of subdivided and analyzed dependent variables presented that every time the hand grip strength increased by 1kg, the L-HDL -C decreased by 0.325 less, but it did not affect H-LDL-C and H-TG. Conclusion: In order to reduce dyslipidemia, it is essential to recognize the necessity of muscular exercise and fulfill it. Focus on health care, such as health conditions, health behavior, and make efforts to participate in health education. If so, it is expected to help reduce the economic burden, such as the treatment of dyslipidemia and improve the quality of life free from mechanical circulatory diseases.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.123-132
• /
• 1987

Yttria-stabilized zirconia with erbia-lanthana were investigated with respect to the amount of Ln2O3 (Ln; Er, La) addition in the range of 0.5∼5 mol% to the base composition of 8 mol% yttriazirconia. Following analysis and measurement were adopted for the characterization of synthesizes of solid electrolyte; phase transformation, lattice parameter, crystallite size, relative density, chemical composition and SEM/EDS. Electrical conductivity by two-probe method versus temperature from 350$^{\circ}C$ to 800$^{\circ}C$ and frequency in the range of 5Hz∼13MHz by complex impedance method was also conducted together with the determination of oxygen ion transference number by EMF method for the evaluation of their electrical properties. The results were as followsing; Electrical conductivity were decreased with increase in Ln2O3 content, but their activation energies increased. In the case of La2O3 addition, espicially, its electrical conductivity was decreased owing to the segregation of second phases at the grain-boundary. Grain-boundary conductivity of the specimen contained 0.5 mol% Er2O3 exhibited a maximum conductivity among thecompositions experimented. However, their bulk conductivities decreased in both case. Oxygen ion transference number was also reduced with decrease in oxygen partial pressure. For example, in the case of Er2O3 addition it retained value in the range of 0.97∼0.94 abvove 4.74${\times}$10-2in oxygen partial pressure. With the increase in the quantities of the evaporation of additive components, the crystallite size of stabilized zirconia decreased, and their relative density also reduced owing to the formation of porosity in their matrices. In the case of La2O3 the sinterbility was improved in the limited amount of addition up to 0.5 mol%, in the same range of addition the strength of sintered bodies were improved perhaps owing to the precipitation of metastable tetragonal phase in the fully stabilized zirconia.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.669-676
• /
• 2004

In this paper, a new algorithm is proposed for resolving multiple broadband incoherent sources incident on a uniform linear array. The proposed method dose not require any initial estimates for finding the transformation matrix, while the Coherent Signal-Subspace Method(CSM) proposed by Wang and Kaveh requires preliminary estimates of multigroup source location. An effective procedure is derived for finding the enhanced spectral density matrix at the center frequency using signal enhancement approach and then constructing a common signal subspace by selecting a unitary transformation matrix which is obtained via rotation of signal subspace method. The proposed approach is found to provide superior performance relative to that obtained with the CSM method in terms of sample bias of direction-of-arrival estimates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.463-466
• /
• 2001

In recent year, Ferroelectric $BLT(Bi_{4-x}La_{x}Ti_{3}O_{12})$ is a promising candidate materials. This study was practiced to make good conditions of BL T targets. In this study, calcination and sintering temperature were kept at $750^{\circ}C$, $1100^{\circ}C$ for 2 hour respectively. the density obtained 7.612, 7.98, $7.877g/cm^{3}$ as $La_{2}O_{3}$ contents were 0.0mol%, 0.25mol%, 0.5mol%. Especially, the lanthanum content of 0.5 mol% measured C-axis (117) preferred orientation more than the others targets in the XRD. In $\varepsilon_{r}-f$ relationship using by HP 4194 A impedance analyzer, the 0.5 mol% observed above 200 relative dielectric constant. but the dissipation factor was higher than others targets at 100Hz~13MHz range. SEM photograph with the content of $La_{2}O_{3}$ was observed like rod and plate types.

• Journal of the Korean Ceramic Society
• /
• v.34 no.6
• /
• pp.583-590
• /
• 1997

The effects of Mn2O3 and Y2O3 additives on the microstructure and dielectric properties of Sr(Zr, Ti)O3 have been investigated. Powders with Sr(Zr1-xTix)O3(0$\leq$x$\leq$0.1) composition were prepared by the conventional solid state processing from commercial TiO2 and precipitation-processed ZrO2. The powders containing sintering additives of Mn2O3 and Y2O3 were compacted and then sintered at 1,55$0^{\circ}C$ for 4 h to get>97% relative density. Mn2O3 suppressed the grain growth and Y2O3 enhanced the density of sintered body. The oxidation state of Mn ions were determined by a chemical wet method and EPR spectroscopy. Mn ions were present as Mn2+ and Mn4+ in SrZrO3, while as Mn3+ and Mn4+ in Ti-substituted Sr(Zr, Ti)O3. With the substitution of Ti, the lattice parameters of SrZrO3 decreased and its dielectric constant increased with remarkable decrease in Q value. The dielectric constant of Sr(Zr, Ti)O3 was in the range of 30 to 40, Q values 1,200~5,400 at 6 GHz and temperature coefficient of resonant frequency -67~100 ppm/K.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.