• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.351-357
• /
• 2006

In this study, quantitative sensitivity analysis on rockfill material influencing the dam crest displacement of Concrete-Faced Rockfill Dam(CFRD) subjected to earthquake loading was carried out. The purpose of this study is to indicate the most important input parameter and to show the quantitative variation of displacement at the crest of CFR type dam during earthquake loading with this input parameter. From the sensitivity analysis, it was found that the crest displacement of CFR type dam subjected to dynamic loading was absolutely affected by the shear modulus of rockfill material and the effect of friction angle of it was negligible. This relative difference of sensitivity was more outstanding in case of crest settlement than in case of crest horizontal displacement. Also, it was found that the extent of effect of shear modulus on the displacement at the crest of CFRD due to dynamic loading decreased as maximum amplitude of input acceleration increased.

• Geomechanics and Engineering
• /
• 제34권5호
• /
• pp.529-545
• /
• 2023

The coupled soil-pile-structure seismic response is recently in the spotlight of researchers because of its extensive applications in the different fields of engineering such as bridges, offshore platforms, wind turbines, and buildings. In this paper, a simple analytical model is developed to evaluate the dynamic performance of seismically isolated bridges considering triple interactions of soil, piles, and bridges simultaneously. Novel expressions are proposed to present the dynamic behavior of pile groups in inhomogeneous soils with various shear modulus along with depth. Both cohesive and cohesionless soil deposits can be simulated by this analytical model with a generalized function of varied shear modulus along the soil depth belonging to an inhomogeneous stratum. The methodology is discussed in detail and validated by rigorous dynamic solution of 3D continuum modeling, and time history analysis of centrifuge tests. The proposed analytical model accuracy is guaranteed by the acceptable agreement between the experimental/numerical and analytical results. A comparison of the proposed linear model results with nonlinear centrifuge tests showed that during moderate (frequent) earthquakes the relative differences in responses of the superstructure and the pile cap can be ignored. However, during strong excitations, the response calculated in the linear time history analysis is always lower than the real conditions with the nonlinear behavior of the soil-pile-bridge system. The current simple and efficient method provides the accuracy and the least computational costs in comparison to the full three-dimensional analyses.

• 대한기계학회논문집A
• /
• 제33권5호
• /
• pp.489-495
• /
• 2009

A novel technique to measuret of viscoelastic properties of polymers is proposed to investigate complex Poisson's ratio as a function of frequency. The forced vibration responses for the samples under the normal and the shear deformation are to be measured with varying load masses. The measured data were used to obtain the viscoelastic properties of the material based on an accurate 2D numerical deformation model of the sample. The 2D model enabled us to exclude data correction by the empirical form factor used in 1D model. Comprehensive measurements of viscoelastic properties of two slightly varied silicone RTV rubber ($Silastic^{(R)}$ S2) compositions were performed. Standard composition (90% PDMS polymer + 10% catalyst) and modified composition (92.5% polymer + 7.5% catalyst) were tested in temperature range from $30^{\circ}C$ to $70^{\circ}C$. Shear modulus, modulus of elasticity, loss factor, and both the real and the imaginary parts of the Poisson's ratio were determined for frequencies from 50 to 400Hz in the linear deformation regime (at relative deformations $10^{-4}{\sim}10^{-3}$).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.1029-1034
• /
• 2001

The effects of binder content and silica sand content on the freezing and thawing resistance of lightweight polymer concrete are examined. As a result, the mass loss and pulse velocity of lightweight polymer concrete decrease with increasing binder content and silica sand content. The relative dynamic modulus and durability factor of lightweight polymer concrete reaches minimum at a silica sand content of 50% and a binder content of 28%, and is inclined to increase with increasing binder content and silica sand content.

• Advances in concrete construction
• /
• 제6권4호
• /
• pp.363-373
• /
• 2018

Portland cement pervious concrete (PCPC) is an effective pavement material to solve or reduce the urban waterlogging problems. The Mechanical properties, the permeability, the abrasion resistance and the frost resistance of PCPC without fine aggregate were investigated. The increase of porosity was achieved by fixing the dosage of coarse aggregate and reducing the amount of cement paste. The results show that the compressive strength and the flexural strength of PCPC decrease with the increase of porosity. The permeability coefficient and the wear loss of PCPC increase with the increase of the porosity. The compressive strength and the flexural strength of PCPC subjected to 25 freeze-thaw cycles are reduced by 13.7%-17.8% and 10.6%-18.3%, respectively. For PCPC subjected to the same freeze-thaw cycles, the mass loss firstly increases and then decreases with the increase of the porosity. The relative dynamic modulus elasticity decreases with the increase of freeze-thaw cycles. And the lower the PCPC porosity is, the more obvious the dynamic modulus elasticity decreases.

• 한국농공학회논문집
• /
• 제46권7호
• /
• pp.47-53
• /
• 2004

Permeable polymer concrete can be applied to roads, sidewalks, river embankments, drain pipes, conduits, retaining walls, yards, parking lots, plazas, interlocking blocks, etc. This study was to explore a possibility of using blast furnace slag powder and stone dust of industrial by-products as fillers for Eco-permeable polymer concrete. Different mix proportions were tried to find an optimum mix proportion of the Eco­permeable polymer concrete. The tests were carried out at $20{\pm}1^{circ}C$ and $60{\pm}2\%$ relative humidity. At 7 days of curing, unit weight, coefficient of permeability, dynamic modulus of elasticity, compressive, flexural and splitting tensile strengths ranged between $1,821{\~}1,955 kg/m^{3}$, $0.056{\~}0.081\;cm/s$, $114{\times}0^{2}{\~}157{\times}10^{2}\;MPa,\;17.6{\~}24.7\;MPa,\;5.98{\~}7.94\;MPa\;and\;3.43{\~}4.70\;MPa$, respectively. It was concluded that the blast furnace slag powder and stone dust can be used in the Eco-permeable polymer concrete.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.41-44
• /
• 2008

본 연구의 목적은, X선조영촬영을 이용한 콘크리트강도의 평가 및 콘크리트열화의 수치화를 수행하는 것이다. 콘크리트강도를 추정하기 위하여, 물-시멘트비가 서로 다른 콘크리트를 제작하여, X선투과선량과 콘크리트강도의 관계를 구하였다. 이 실험에는 콘크리트 외에 몰탈, Non-AE 콘크리트를 이용한 실험도 수행하였다. 또한, 동결융해작용을 가해 상대동탄성계수를 변화시킨 공시체에 대하여, 열화의 수치화를 수행하였다. 실험의 결과, X선조영촬영법을 사용하면, 투과선변화량이 구해지므로, 콘크리트강도의 추정과 열화의 수치화가 가능하다는 것을 알았다.

• 한국건설순환자원학회논문집
• /
• 제4권1호
• /
• pp.96-100
• /
• 2009

모재콘크리트의 품질이 각기 다른 순환잔골재의 특성을 모르타르 시험에 의해 비교 고찰하였다. 모재콘크리트 강도가 클수록 밀도가 컸으며, 부착 시멘트페이스트의 공극량이 감소하므로 흡수율은 작게 나타났다. 순환잔골재를 사용한 모르타르의 압축강도 및 휨강도 특성은 신모르타르의 계면영역과 순환잔골재에 부착된 모르타르의 강도에 의해 지배적인 영향을 받으며, 모재콘크리트의 강도가 작을수록 다공성 재료가 되므로 강도발현이 작게 나타났다. 재령 180일에서 순환잔골재를 사용한 모르타르의 건조수축은 약 $1800{\sim}2000{\mu}m/m$ 정도로 천연잔골재를 사용한 모르타르보다 1.5배 정도 크게 나타났는데 이것은 순환잔골재에 부착된 모르타르가 다공성으로 흡수율이 크기 때문에 나타난 결과로 판단된다. 그러나 동결융해시험에서 순환잔골재를 사용한 모르타르의 내구성은 천연골재와 비슷한 수준으로 모재콘크리트의 강도에 의한 영향은 크지 않은 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제11권1호
• /
• pp.59-68
• /
• 2017

Mercury intrusion and nitrogen sorption porosimetry were employed to investigate the pore structure of calcium sulfoaluminate ($C{\bar{S}}A$) and portland cement pastes with cement-to-water ratio (w/c) of 0.40, 0.50, and 0.60. A unimodal distribution of pore size was drawn for $C{\bar{S}}A$ cement pastes, whereas a bimodal distribution was established for the portland cement pastes through analysis of mercury intrusion porosimetry. For the experimental results generated by nitrogen sorption porosimetry, the $C{\bar{S}}A$ cement pastes have a smaller and coarser pore volume than cement paste samples under the same w/c condition. The relative dynamic modulus and percentage weight loss were used for investigation of the concrete durability in freeze-thaw condition. When coarse aggregate with good freeze-thaw durability was mixed, air entrained portland cement concrete has the same durability in terms of relative dynamic modulus as $C{\bar{S}}A$ cement concrete in a freeze-thaw environment. The $C{\bar{S}}A$ cement concrete with poor performance of durability in a freeze-thaw environment demonstrates the improved durability by 300 % over portland cement concrete. The $C{\bar{S}}A$ concrete with good performance aggregate also exhibits less surface scaling in a freeze-thaw environment, losing 11 % less mass after 297 cycles.

• 한국건설순환자원학회논문집
• /
• 제10권2호
• /
• pp.143-151
• /
• 2022

동결융해에 의한 콘크리트 손상 발생 시기를 평가하기 위하여 상대동탄성계수와 표면반발경도를 이용하여 비교하였다. 비교 결과 W/C 70 실험체군에서는 표면반발경도에 의한 콘크리트 손상 발생 평가가 200 싸이클 이상 빠르게 나타나는 것으로 관찰되었다. 뿐만 아니라 이후 점점 심해지는 동해를 표현할 수 있는 데이터를 지속적으로 제공해주어 동해 발생하는 초기 시점부터 동해를 확인할 수 있다는 것을 나타냈다. W/C 60과 50 실험체군에서도 표면반발경도가 콘크리트 동해 손상을 상대동탄성계수 보다 빠르게 평가했으며, 물-시멘트비에 변화에 상관없이 전반적으로 동결융해 손상시기 상대적으로 빠르고 정확하게 평가한 것으로 판단된다.