• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.659-664
• /
• 2000

In this paper, We have discussed on the modeling of machined outer geometry which was established for the case of round shape machining, also the effects of externally machined profile are analyzed and its modeling realiability was verified by the experiments of roundness testing, especially in lathe operation. In this study, we established harmonic geometric model with the parameter harmonic function. In general, we can calculate the theoretical roundness profile with arbitrary multilobe parameter. But in real experiments, only 2-5 lobe profile was frequently measured. the most frequently ones are 3 and 5 lobe profile in experiments. With this results, we can predict that these results may be applies to round shape machining such as turning, drilling, boring, ball screw and cylindrical grinding operation in bearing and shaft making operation with the same method. In this study, simulation and experimental work were performed to show the profile behaviors. we can apply these new modeling method in real process for the prediction of part profile behaviors machined such as in round shape machining operation.

• 한국항행학회논문지
• /
• 제12권6호
• /
• pp.653-658
• /
• 2008

자동차에 적용되는 각종 전자 부품의 복잡도는 21세기를 맞이하면서 급속도로 변화하고 있다. 특히, 각종 전기, 전자 시스템의 급증은 자동차의 안전과 직결되는 문제로 인식되고 있다. 차량의 전장 및 전자부품을 연결해주는 커넥터는 인간의 신경망과 같아서 조그마한 접촉 불량도 차량의 운전에 심각한 영향을 미칠 수 있다. 차량의 진동과 커넥터 단자의 열 변형으로 인한 프레팅 부식은 산화막을 형성하여 접촉저항을 증가시키고 특히 산화층은 진접촉면적의 감소와 상승저항 등 터널 효과에서 급격한 상승을 보이는 결과로 제어신호를 왜곡하여 작동기의 동작오류를 초례한다. 본 논문에서는 이러한 프레팅 부식 현상을 검증하기 위한 주석으로 도금된 구리 커넥터에 스텝핑 모터를 사용하여 일정한 변위를 갖는 미세 진동을 유발하여 프레핑 부식의 진행과 접촉저항의 변화를 고찰하여 이에 대한 대비책을 강구하고자 한다.

• The Korean Journal of Pain
• /
• 제23권4호
• /
• pp.266-269
• /
• 2010

Spinal cord stimulation (SCS) is used to manage chronic pain syndromes and it is accepted a cost-effective therapy. Child-bearing women who had SCS become or choose to become pregnant despite these policies pregnancy is a relative contraindication. A 32-year-old woman had SCS as a treatment for the CRPS I of the left lower extremity, During various check up tests, we happen to find out that her serum beta-hCG was positive and confirmed pregnancy. SCS is not recommended in pregnancy because the effects of SCS on pregnancy and nursing mothers had not been confirmed. However, many female patients suffering from chronic pain may expect future pregnancy and we think that they must be informed about the possibility of pregnancy and the effects of SCS device implantation in the course of pregnancy. First of all, a good outcome requires a multidisciplinary team approach, including obstetrics, neonatology, pain medicine and anesthesia, as was used from an early pregnancy. Unfortunately, she had a misabortrion after 6 weeks.

• 한국지반환경공학회 논문집
• /
• 제4권1호
• /
• pp.59-66
• /
• 2003

건설공사에서 발생하는 환경문제에 대한 관심이 고조되는 가운데 기성 말뚝을 항타하는 과정에서 유발되는 소음, 진동문제를 해결하기 위해 저소음, 저진동 공법인 매입말뚝공법이 많이 적용되고 있다. 국내에서는 매입말뚝공법으로 SIP공법이 주로 사용되고 있다. 그러나 아직까지 SIP공법에 관한 합리적인 지지력 산정식이 제시되어있지 못한 실정이다. 이에 대해 본 연구에서는 SIP 말뚝의 주면저항력 특성을 고찰하여 이러한 문제점들을 개선, 보완하기 위하여 다양한 조건에서 SIP말뚝 주면과 지반사이의 경계면에 대하여 직접전단 시험을 실시하였다. 시험 결과를 토대로 통일분류상 SM, SC 지반에서의 SIP말뚝 주면저항력 특성을 고찰하고 해당 지반에서 주면저항력 산정식을 제시하였다. 또한, 말뚝 경계요소의 저항력에 대한 새로운 비선형 수치 모델식과 계수산정식을 제안하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.780-785
• /
• 2003

Recently the trends in information storage devices need small size, mobility, high capacity, and low power consumption etc. To satisfy those, the development of high performance actuator is an important issue. Compared with general linear actuator for optical disk drive, swingarm type rotary actuator is suitable to design in small form factor and has fast access time for random access. Swingarm actuator is designed considering the structural problem and the actuating force of VCM(Voice Coil Motor). The increase of mass caused by optical components makes vibration problems of swing-arm, therefore resonance frequency should be increased and inertia has to be reduced. ANSYS FEM tool is employed in optimizing swingarm. The VCM is designed using 3-D electro-magnetic analysis, and parameters of magnetic circuit are determined to matte large flux density. The large flux density enables to achieve low power consumption. VCM holder is designed to get the mass balance of total actuator and this balance reduces the magnitude of critical mode relative to pivot bearing, It is expected that swingarm type rotary actuator designed by this method is available to variable type of micro optical disk drives.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.905-909
• /
• 2010

Magnetic beads (Dynabeads$^{(R)}$) embedded in ~1 micron size polystyrene beads bearing surface carboxylic acid groups were modified with aminobenzyl ethylenediaminetetraacetic acid (ABEDTA) to concentrate or separate metal ions using pH gradients on micro and nano scales. The immobilization of ABEDTA was achieved by amide formation. The presence of the metal chelating functional group in the fully deprotonated form was confirmed by FT-IR. The chelation efficiency of beads was tested by determining metal ions in supernatant using GFAAS when pH gradients from 3 to 7. Mixtures of Cu and Mg and of Cd and Mn (at 10 ng/mL of metal) were separated as the difference in formation constant with the functional group of ABEDTA. The separation was repeated twice with relative standard deviation of <18%. A polydimethylsiloxane (PDMS) microchip column packed with EDTA-coated magnetic beads was optimized to concentrate metal ion for practical applications by eluting a Cu solution of micro scale at pH 3.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.144-153
• /
• 1998

Base isolation is an innovative design strategy that provides a practical alternative for the seismic design of structures. Base isolators, mainly employed to isolate large structures subjected to earthquake ground excitations and to rehabilitate structures damaged by past earthquakes, deflect and absorb the seismic energy horizontally transmitted to the structures. This study demonstrates that the base isolation system may offer effective performance for bridges during severe seismic events through shaking table tests. Two base isolation system using laminated rubber bearings with and without hydraulic dampers are tested. The test results strongly show that the laminated rubber bearings cause the natural period of the bridge structure increased considerably, which results in the deck acceleration and the shear forces on the piers reduced significantly. The results also demonstrate that the hydraulic dampers enhance the system's capacity in dissipating energy to reduce the relative displacement between the bridge deck and the pier.

• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.691-702
• /
• 2017

Clearances are essential for the assemblage of mechanisms to allow the relative motion between the joined bodies. This clearance exists due to machining tolerances, wear, material deformations, and imperfections, and it can worsen the mechanism performance when the precision and smoothly-working are intended. Energy is a subject which is less paid attention in the area of clearance. The effect of the clearance on the energy of a flexible slider-crank mechanism is investigated in this paper. A clearance exists in the joint between the slider and the coupler. The contact force model is based on the Lankarani and Nikravesh model and the friction force is calculated using the modified Coulomb's friction law. The hysteresis damping which has been included in the contact force model dissipates energy in clearance joints. The other source for the energy loss is the friction between the journal and the bearing. Initial configuration and crank angular velocity are changed to see their effects on the energy of the system. Energy diagrams are plotted for different coefficients of friction to see its influence. Finally, considering the coupler as a flexible body, the effect of flexibility on the energy of the system is investigated.

• 전자공학회논문지S
• /
• 제35S권7호
• /
• pp.72-85
• /
• 1998

In this paper, we propose a new method that sequentially estimates TDOA(Time Delay Of Arrival) and FDOA(Frequency Delay Of Arrival) for extracting the information about the bearing and relative velocity of a target in passive radar or sonar arrays. The objective is to efficiently estimate the TDOA and FDOA between two sensor signal measurements, corrupted by correlated Gaussian noise sources in an unknown way. The proposed method utilizes the one dimensional slice function of the third order cumulants between the two sensor measurements, by which the effect of correlated Gaussian measurement noises can be significantly suppressed for the estimation of TDOA. Because the proposed sequential algoritjhm uses the one dimensional complex ambiguity function based on the TDOA estimate from the first step, the amount of computations needed for accurate estimationof FDOA can be dramatically reduced, especially for the cases where high frequency resolution is required. It is demonstrated that the proposed algorithm outperforms existing TDOA/FDOA estimation algorithms based on the ML(maximum likelihood) criterionandthe complex ambiguity function of the third order cumulant as well, in the MSE(mean squared error) sense and computational burden. Various numerical resutls on the detection probability, MSE and the floatingpoint computational burden are presented via Monte-Carlo simulations for different types of noises, different lengths of data, and different signal-to-noise ratios.

• 한국지반신소재학회논문집
• /
• 제16권2호
• /
• pp.159-164
• /
• 2017

본 논문에서는 화강풍화토 조건에서 온도변화에 따른 지반의 하중지지 특성의 변화를 관찰하기 위해 실험을 진행하였다. 지반의 온도변화의 시간의 흐름에 의한 각 지층의 온도 및 체적함수율(V.W.C)를 지속하여 측정하여 온도변화가 보강토에 미치는 영향을 확인하였다. 또한 온도상승 후 지반에 수직으로 Loading-Unloading 작용을 통해 열에 의한 지반의 열-수리-역학적 관점에서의 하중지지력을 검토하였으며 비보강 지반과 실제 보강토 옹벽에서처럼 보강재와 배수층을 설치한 지반내 온도작용에 의한 배수작용과 보강재의 영향에 관하여 분석하였다. 그 결과 열교환 장치를 설치한 경우 수직하중의 강도가 더 크게 나타나 지반의 강도가 증가한 것으로 나타났다.