• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.6
• /
• pp.504-511
• /
• 1990

Weather data acquisition and potential evapotranspiration (PET) calculation procedure were investigated to support the agricultural development efforts in the mid-altitude mountainous region of Cheju Island. Automated weather stations (AWS) were installed at two points representing the east and the west of the study area. A personal computer was employed to collect the near-real time weather data from AWS through the public telephone line. Hourly data were available for solar radiation, air and soil temperature, relative humidity, wind speed and direction, and precipitation. Based on the data for the month of June 1989, daily climatic features were comparatively analyzed for the two areas and the Penman equation was used to calculate PET. Air temperature was higher by 1 to 2 degree C in the east due mainly to the higher solar radiation and partly to the Fohn effect caused by the daytime southwesterly blowing over Mt. Halla. Diurnal march of soil temperature lagged by 4 hours behind that of air temperature and the diurnal range for 10cm subsurface soil was 3 degree C. Wind was consistently stronger and a marked sea-land breeze circulation was detected in the west. Calculated PET values were higher in the east by 6% than in the west. Overall values from the east and the west of the mid-altitude mountainous region were higher by 30% than those of the coastal region, which were estimated from the Class A Pan evaporation measured by the Korea Meteorological Service Offices.

• Korean Journal of Plant Resources
• /
• v.19 no.4
• /
• pp.530-536
• /
• 2006

Hardwood cutting propagation and early growth characteristics were investigated in order to develop the method of cutting propagation and to find out growth characteristics in the low altitude for in situ and ex situ conservation of Empetrum nigrum var. japonicum K. Koch, which is typical arctic alpine plants on Mt. Halla. The growth of roots and shoots was different depending on hormone concentrations or soil conditions. The survival rate, rooting rate, root growth, number of root and shoot growth increased with treatment of 100 mg/l or 500 mg/l NAA. Consequently, optimum condition of hardwood cutting was at treatment with 100 mg/l or 500 mg/l NAA. When plantlets from hardwood cuttings were exposed to the field condition, after 7 months survival rate was 73.3% without shading while $91.1{\sim}94.4%$ at shading conditions. In the green house, however, survival rate of plantlets were $95.6{\sim}97.8%$ without shading. The growth of plantlets was different depending on sites and shading conditions. Particularly, the best growth was obtained when the plantlets were grown in shading conditions. It indicates that relative humidity and light intensity are correlated with the growth in the low altitude area.

• Ecology and Resilient Infrastructure
• /
• v.2 no.3
• /
• pp.198-205
• /
• 2015

Impacts of climate change on aquatic ecosystems range from changes in physiological processes of aquatic organisms to species distribution. In this study, MaxEnt that has high prediction power without nonoccurrence data was used to simulate fish distribution changes in the Geum river watershed according to climate change. The fish distribution in 2050 and 2100 was predicted with RCP 8.5 climate change scenario using fish occurrence data (a total of 47 species, including 17 endemic species) from 2007 to 2009 at 134 survey points and 9 environmental variables (monthly lowest, highest and average air temperature, monthly precipitation, monthly lowest, highest and average water temperature, altitude and slope). The fitness of MaxEnt modeling was successful with the area under the relative operating characteristic curve (AUC) of 0.798, and environmental variables that showed a high level of prediction were as follows: altitude, monthly average precipitation and monthly lowest water temperature. As climate change proceeds until 2100, the probability of occurrence for Odontobutis interrupta and Acheilognathus yamatsuatea (endemic species) decreases whereas the probability of occurrence for Microphysogobio yaluensis and Lepomis macrochirus (exotic species) increases. In particular, five fish species (Gnathopogon strigatus, Misgurnus mizolepis, Erythroculter erythropterus, A. yamatsuatea and A. koreensis) were expected to become extinct in the Geum river watershed in 2100. In addition, the species rich area was expected to move to the northern part of the Geum river watershed. These findings suggest that water temperature increase caused by climate change may disturb the aquatic ecosystem of Geum river watershed significantly.

• Journal of Soil and Groundwater Environment
• /
• v.26 no.3
• /
• pp.25-36
• /
• 2021

This study evaluated monthly, seasonal and altitudinal changes of oxygen and hydrogen isotope compositions of wet precipitation samples (n = 238) that were collected for last four years from 7 altitudes (from 265 to 1,500 m above sea level) in the Jeju Samdasoo watershed at the southeastern part of Jeju island, in order to examine the recharge characteristics of groundwater that is pumped out for the production of the Samdasoo drinking mineral water. Precipitation samples showed a clear seasonal change of O-H isotopic composition as follow, due to the different air masses and relative humidity: 𝛿D = 7.3𝛿¹⁸O + 11.3 (R² = 0.76) in the wet season (June to September), while 𝛿D = 7.9𝛿¹⁸O + 9.5 (R² = 0.91) in the dry season (October to May). In contrast, the stable isotope compositions of groundwater were nearly constant throughout the year and did not show a distinct monthly or seasonal change, implying the well-mixing of infiltrated water during and after its recharge. An altitudinal effect of the oxygen isotope compositions of precipitation was also remarkable with the decrease of -0.19‰ (R² = 0.91) with the elevation increase by 100 m. Based on the observed altitudinal change, the minimum altitude of groundwater recharge was estimated as 1,200 m above the sea level in the Jeju Samdasoo watershed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.899-907
• /
• 2022

According to the Unmanned aircraft system Traffic Management (UTM), drones are permitted to fly up to 150m above ground, which is located in the atmospheric boundary layer where there is considerable wind fluctuation due to turbulence. Although it is difficult to predict when turbulence will occur drone aviation safety could be enhanced by having a better understanding of the characteristics of vertical profile of wind in the flight area. We used wind lidar (WIndMast 350M) to observe vertical profiles of wind at the test site for aviation meteorological observation equipment located near Incheon International Airport in July and September, 2022. In this study, we utilized the observed wind profile data to propose a technique for obtaining information that could help improve the drone aviation safety. The Fourier transform analysis is used to evaluate the temporal characteristics of the horizontal wind speed at various vertical levels up to 350m. We also examined the relative contribution of the variance of wind having scales of less than an hour, a crucial scale for drone flight, to the variance of wind having all scales at each vertical altitude for days with and without precipitation.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.59-66
• /
• 2005

A new ion transport code for planetary ionospheric studies has been developed with consideration of velocity differences among ion species involving ion-ion collision. Most of previous planetary ionosphere models assumed that ions diffuse through non-moving ion and neutral background in order to consolidate continuity and momentum equations for ions into a simple set of diffusion equations. The simplification may result in unreliable density profiles of ions at high altitudes where ion velocities are fast and their velocity differences are significant enough to cause inaccuracy when computing ion-ion collision. A new code solves explicitly one-dimensional continuity and momentum equations for ion densities and velocities by utilizing divided Jacobian matrices in matrix inversion necessary to the Newton iteration procedure. The code has been applied to Martian nightside ionosphere models, as an example computation. The computed density profiles of $O^+,\;OH^+$, and $HCO^+$ differ by more than a factor of 2 at altitudes higher than 200 km from a simple diffusion model, whereas the density profile of the dominant ion, $O_2^+$, changes little. Especially, the density profile of $HCO^+$ is reduced by a factor of about 10 and its peak altitude is lowered by about 40 km relative to a simple diffusion model in which $HCO^+$ ions are assumed to diffuse through non-moving ion background, $O_2^+$. The computed effects of the new code on the Martian nightside models are explained readily in terms of ion velocities that were solved together with ion densities, which were not available from diffusion models. The new code should thus be expected as a significantly improved tool for planetary ionosphere modelling.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.3
• /
• pp.78-85
• /
• 2004

The non-planned development of the rural area surrounding the Metropolitan area has become a social problem. The land development program until now has an aspect of not combining the spacial plan and the environmental plan. The land use and city development system based on development should change into a form that combines developing the area and conserving the environment. Therefore, this research attempts to compare the results of the overlay analysis and the gravity matrix which are ways to evaluate the value land that has a high environmental conservation value. The research area is the town of Seonggeo-eup, Cheonan City, and the reason for selecting this area is because it is expected to be densely populated as a connected area to the Metropolitan and the development pressure, such as expanding the industrial area, is high due to convenient transportation. The environmental factors used in the research are the relative altitude, incline, age-class, natural degree of the ecology, classification of the land covering and the NDVI, and the research methods used are the overlay analysis of the GIS and the statistical method. The overlay analysis results showed level 1 13.2%, level 2 30.7%, level 3 47.4%, level 4 1.0%, level 5 2.4%, level 6 5.4% and so on. The gravity matrix was classified as level 1 27.0%, level 2 9.3%, level 3 58.2%, level 4 2.4%, level 5 2.3%, level 6 0.9% and so on. These results are more appropriate than current methods for plans that value the environment because the analyzed results of the gravity matrix have a tendency to highly condense the environmentally valuable area. Consequently, if the spacial and environmental plans combine and therefore expand the efficient use of the land in the current state where the nation's concern in environment is getting higher, it is thought that it will contribute highly on the development of the nation's life quality.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.1
• /
• pp.123-132
• /
• 1995

We developed a S/W system to simulate the orbit tracking data as nearly equal as the real data obtained at the tracking antenna by modeling various causes that could have effects on the tracking data (range, range rate, azimuth, elevation) of an artificial satellite. Using the S/W developed we produced delay values of tracking data due to the light-time effect and the terrestrial atmosphere. According to the simulation results due to the Earth atmosphere, the values delayed by the troposhpere were increased as the temperature, relative humidity, and pressure of the troposphere are more larger. However, delay values due to the ionosphere were dependent on both the maximum electron density and the frequencies used. They are more and more increased as the maximum electron density and frequency are more larger. And the delaying values by the light-time effect are more larger by the fast orbital motion as the altitude of an artificial satellite is more lower.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.470-482
• /
• 2008

Seasonal variations of chemical composition and optical properties of aerosols at Seoul and Gosan were investigated using the ground-based aerosol measurements and an optical model calculation. The mass fraction of elemental carbon was $8{\sim}17%$, but its contribution on light absorption was high up to $29{\sim}48%$ in Seoul. In Gosan, the contribution of water soluble aerosols on aerosol extinction was $83{\sim}94%$ due to the high mass fraction of these particles in the range of $56{\sim}88%$. Model calculation showed that the water holding capacity of aerosols was larger in Gosan than in Seoul because of higher relative humidity and temperature along with abundant water soluble aerosols. Difference between measured and calculated aerosol optical depths was the highest in summer. This was because aerosol optical depth calculated from ground-based measurements could not consider aerosol loadings at high altitude in spite of high column-integrated aerosol loadings observed by Sun photometer. Although hygroscopic growth was expected to be dominant in summer, the mass concentration of water soluble aerosols was too low to permit this growth.

• Journal of Computational Design and Engineering
• /
• v.3 no.1
• /
• pp.37-52
• /
• 2016

To injection mould polymers, designing mould is a key task involving several critical decisions with direct implications to yield quality, productivity and frugality. One prominent decision among them is specifying sprue-bush conduit expansion as it significantly influences overall injection moulding; abstruseness anguish in its design criteria deceives direct determination. Intuitively designers decide it wisely and then exasperate by optimising or manipulating processing parameters. To overwhelm that anomaly this research aims at proposing an ideal design criteria holistically for all polymeric materials also tend as a functional assessment metric towards perfection i.e., criteria to specify sprue conduit size before mould development. Accordingly, a priori analytical criterion was deduced quantitatively as expansion ratio from ubiquitous empirical relationships specifically a.k.a an exclusive expansion angle imperatively configured for injectant properties. Its computational intelligence advantage was leveraged to augment functionality of perfectly injecting into an impression gap, while synchronising both injector capacity and desired moulding features. For comprehensiveness, it was continuously sensitised over infinite scale as an explicit factor dependent on in-situ spatio-temporal injectant state perplexity with discrete slope and altitude for each polymeric character. In which congregant ranges of apparent viscosity and shear thinning index were conceived to characteristically assort most thermoplastics. Thereon results accorded aggressive conduit expansion widening for viscous incrust, while a very aggressive narrowing for shear thinning encrust; among them apparent viscosity had relative dominance. This important rationale would certainly form a priori design basis as well diagnose filling issues causing several defects. Like this the proposed generic design criteria, being simple would immensely benefit mould designers besides serve as an inexpensive preventive cliché to moulders. Its adaption ease to practice manifests a hope of injection moulding extremely alluring polymers. Therefore, we concluded that appreciating injectant's polymeric character to design exclusive sprue bush offers a definite a priori advantage.