• 제목/요약/키워드: Rejection Ratio

검색결과 216건 처리시간 0.084초

다양한 증착변수에 따른 AIN 박막의 물성 및 SAW 소자의 특성 분석 (Effects of Deposition Conditions on Properties of AIN Films and Characteristics of AIN-SAW Devices)

  • 정준필;이명호;이진복;박진석
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제52권8호
    • /
    • pp.319-324
    • /
    • 2003
  • AIN thin films are deposited on Si (100) and $SiO_2$/Si substrates by using an RF magnetron sputtering method and by changing the conditions of deposition variables, such as RF power, $N_2$/Ar flow ratio, and substrate temperature ($T_sub$). For all the deposited AIN films, XRD Peak patterns are monitored to examine the effect of deposition condition on the crystal orientation. Highly (002)-oriented AIN films are obtained at following nominal deposition conditions; RF Power : 350W, $N_2$/Ar ratio = 10/20, T$_{sub}$ : $250^{\circ}C$, and working pressure = 5mTorr, respectively. AIN-based SAW devices are fabricated using a lift-off method by varying the thickness of AIN layer. Insertion losses and side-lobe rejection levels of fabricated SAW devices are extracted from their frequency response characteristics, which are also compared in terms of AIN thickness and substrate. Relationships between the film properties of AIN films and the frequency responses of SAW devices are discussed. It is concluded from the experimental results that the (002)-preferred orientation as well as the surface roughness of AIN film may play a crucial role of determining the device performances of AIN-SAW devices.s.

Study of n/γ discrimination using 3He proportional chamber in high gamma-ray fields

  • Choi, Joonbum;Park, Junesic;Son, Jaebum;Kim, Yong Kyun
    • Nuclear Engineering and Technology
    • /
    • 제51권1호
    • /
    • pp.263-268
    • /
    • 2019
  • The $^3He$ proportional chamber is widely used for neutron measurement owing to its high neutron detection efficiency and simplicity for gamma-ray rejection. In general, the neutron and gamma-ray signals obtained from the $^3He$ proportional chamber can be easily separated by the difference in the pulse heights. However, for a high gamma-ray field, the gamma-ray signal cannot be precisely eliminated by the pulse height due to gamma-ray pulse pileup which causes the pulse height of gamma-ray pulse to increase and making the pulses due to neutrons and gamma rays indistinguishable. In this study, an improved algorithm for $n/{\gamma}$ discrimination using a parameter, which is the ratio of the rise time to the pulse height, is proposed. The $n/{\gamma}$ discrimination performance of the algorithm is evaluated by applying it to $^{252}Cf$ neutron signal separation from various gamma-ray exposure rate levels ranging 0.1-5 R/h. The performance is compared to that of the conventional pulse-height analysis method in terms of the gamma elimination ratio. The suggested algorithm shows better performance than the conventional one by 1.7% (at 0.1 R/h) to 70% (at 5 R/h) for gamma elimination.

기상 레이다의 지형 클러터 제거를 위한 지형적응 클러터 맵 알고리듬 성능분석 (Performance Analysis on Terrain-Adaptive Clutter Map Algorithm for Ground Clutter Rejection of Weather Radar)

  • 김혜리;정정수;곽영길;김지원;김지현;고정석
    • 한국전자파학회논문지
    • /
    • 제25권12호
    • /
    • pp.1292-1299
    • /
    • 2014
  • 기상 레이다 시스템은 지상, 해상, 상공 등의 넓은 입체 공간에 분포하는 기상정보를 실시간으로 제공한다. 그러나 산악지역과 같이 강수 신호 주변에 지형 클러터가 존재하는 경우, 큰 지형 클러터 신호를 강수 신호로 오인하여 잘못된 기상 정보를 제공할 수 있다. 우리나라 국토는 산지가 많아서 지형 클러터의 영향으로 인한 기상 오류를 줄이기 위해서는, 국내 지형 환경에 적합한 클러터 제거 기법이 필요하다. 본 논문에서는 지형 특성을 반영한 클러터 맵을 만들어, 지형 클러터를 제거하는 C-Map 기법을 제안한다. 클러터 맵은 맑은 날의 원시 신호(I/Q) 자료를 이용하여 획득되고, 지형 클러터 제거는 클러터 맵과 수신 신호의 도플러 차이를 이용하여 수행된다. 제안된 알고리듬의 성능 분석은 소백산 강우 레이다 데이터를 이용하여 수행되었으며, 임계상수에 따른 지형 클러터 제거율은 91.17 %로 나타났다.

Polyethylene Glycol을 이용한 Cross-Flow Ultrafiltration에 있어서 운전조건의 영향 (The Effect of Operating Conditions on Cross-Flow Ultrafiltration with using Polyethylene Glycol)

  • 유근우;서형준
    • 공업화학
    • /
    • 제9권7호
    • /
    • pp.950-955
    • /
    • 1998
  • 본 연구는 두 종류의 Polyethlene Glycol(PEG, Mw; 8000, 20000)을 cross-flow로 한외여과(막; 분획분자량 6000, 20000)함에 있어서 시간, 운전압력, 유입농도, 그리고 순환유량의 변화에 따라 투과유속과 제거율의 관계를 조사하는데 목적을 두고 있다. 실험진행에 있어서 운전압력은 7, 14, 28 psi의 3단계로, 순환유량은 1000 mL/min와 2000 mL/min 두 가지로, 그리고 유입농도도 100 mg/L과 1000 mg/L의 두가지로 하여 실행하였다. 투과유속은 PEG의 분자량과 농도가 작을수록 압력증가와 함께 증가하였으며, 겉보기제거율($R_o$)은 PEG의 분자량과 농도가 클수록 증가하였다. 그러나 압력이 증가되었을 때 $R_o$는 감소하였다. 일정한 압력하에서 PEG수용액의 투과유속과 $R_o$는 시간변화(8 h)에 관계없이 일정하였다. 순환유량의 변화에 있어서 투과유속에는 거의 영향이 없었으나, $R_o$는 순환유량이 큰 경우가 높게 나타났으며, 두 순환유량의 경우 모두 압력증가와 함께 $R_o$는 감소하였다. 한편, 투과유속과 조작압력의 거동을 분석하기 위해 사용된 투과도비($\alpha$)는 조작압력과 순환유량의 증가와 함께 증가하였으며, 모든 경우에서 1보다 작게 나타났기 때문에 농도분극현상을 분석할 수 있었다. 그리고 물질전달계수로부터 얻은 진제거율(R)은 압력증가와 함께 감소하였으며, 선유속과 PEG의 분자량이 클수록 높게 나타났다.

  • PDF

L1/L2 이중-밴드 GPS 수신기용 RF 전단부 설계 (Design of the RF Front-end for L1/L2 Dual-Band GPS Receiver)

  • 김현덕;오태수;전재완;김성균;김병성
    • 한국전자파학회논문지
    • /
    • 제21권10호
    • /
    • pp.1169-1176
    • /
    • 2010
  • 본 논문에서는 L1/L2 이중-밴드 GPS(Global Positioning System) 수신기용 RF 전단부를 설계하였다. 수신기는 Low IF 구조이며, 인덕터를 사용하지 않는 광대역 저잡음 증폭기(Low Noise Amplifier: LNA)와 이미지 제거를 위하여 다상 여과기(poly-phase filter)를 포함하는 quadrature 하향 변환 주파수 혼합기(quadrature down-conversion mixer) 및 전류 모드 논리(Current Mode Logic: CML) 주파수 분배기로 구성되어 있다. 저잡음 증폭기와 이미지 제거 주파수 혼합기는 높은 이득과 헤드룸 문제를 해결하기 위하여 전류 블리딩 기술을 이용하였으며, 광대역 입력 정합을 구현하기 위하여 공통 드레인 피드백을 이용하였다. $0.18{\mu}m$ CMOS 공정을 이용해 제작된 RF 전단부는 L1 밴드에서 38 dB 그리고 L2 밴드에서 41 dB의 이득을 보이며, IIP3는 L1 밴드에서 -29 dBm, L2 밴드에서는 -33 dBm이다. 입력 정합은 50 MHz에서 3 GHz까지 -10 dB 이하를 만족하며, 잡음 지수(Noise Figure: NF)는 L1 밴드에서는 3.81dB, L2 밴드에서는 3.71 dB를 보인다. 이미지 주파수 제거율은 36.5 dB이다. 설계된 RF 전단부의 칩 사이즈는 $1.2{\times}1.35mm^2$이다.

이온 몰 전도도가 나노여과막에 의한 폐수 중의 중금속 분리특성에 미치는 영향 (Effect of Ionic Molar Conductivity on Separation Characteristics of Heavy Metals by Nanofiltration Membranes in Waste Water)

  • 오정익
    • 토지주택연구
    • /
    • 제4권1호
    • /
    • pp.119-124
    • /
    • 2013
  • 나노여과막은 일반적으로 하전막이며, 용질의 하전성, 막과의 상호작용에 의해서 특징 있는 분리특성을 보인다. 본 연구에서는 나노여과막에 의한 폐수 중의 중금속류의 제거에 미치는 하전특성을 조사했다. 크롬(Cr), 철(Fe), 구리(Cu), 아연(Zn), 비소(As), 주석(Sn), 납(Pb)을 각각 0.1mg/L 첨가한 모의폐수를 제조하여 나노여과막(a)와 나노여과막(b)를 이용하여 운전압력 0.24MPa, 온도 $25^{\circ}C$에서 여과실험을 수행하였다. 그 결과, 나노여과막(a)와 나노여과막(b)에 의한 염소 이온의 제거율은 12.8%, 3.5%였고, 황산이온의 제거율은 78%, 9.3%였고 TOC의 제거율은 70.4%, 26.2%이었다. 한편, 중금속의 제거율은 나노여과막(a)의 경우 크롬(Cr) 92.5%, 철(Fe) 90.9%, 구리(Cu) 93.1%, 아연(Zn) 92.6%, 비소(As) 74.6%, 주석(Sn) 97.3%, 납(Pb) 93.4%이었고, 나노여과막(b)의 경우는 크롬(Cr) 69.9%, 철(Fe) 84.6%, 구리(Cu) 87.0%, 아연(Zn) 73.3%, 비소(As) 15.2%, 주석(Sn) 80.1%, 납(Pb) 87.7%이었다. 여기서, 나노여과(a), 나노여과(b)의 경우 공통적으로 크롬, 철, 동, 아연, 주석, 납에 비하여 비소의 제거율은 상대적 낮았다. 상기 실험결과에서 폐수 중에 다량 함유되는 염소이온 및 황산이온에 대한 중금속류의 분리계수와 이온성분의 수중에서의 활동정도를 나타내는 인자인 이온 몰 전도도로 해석할 수 있었다. 그 결과, 몰 전도도 비가 큰 중금속 이온일수록, 나노여과막에 의한 중금속 이온의 제거율이 높아지는 경향을 알 수 있었다.

MZ세대에 대한 대중감성 연구: 소셜미디어(SNS) 감성 분석을 통해 (A Study on Popular Sentiment for Generation MZ: Through social media (SNS) sentiment analysis)

  • 안명숙
    • 문화기술의 융합
    • /
    • 제9권1호
    • /
    • pp.19-26
    • /
    • 2023
  • 본 연구에서는 소셜 미디어 빅데이터 감성분석 방법을 통해 'MZ세대'에 대한 대중 감성을 살펴보았다. 분석을 위해 소비자 계정 SNS 텍스트를 살펴보고 내용상 외부 감성과 MZ세대 본인들의 감성을 분류하여 긍정 및 부정 감성 요인들을 제시하였다. 이에 따른 결론은 'MZ세대' 관련하여 호감과 흥미의 긍정정서가 72.1%로, 부정적인 감성비율 27.9 % 보다 높았다. 긍정감성에서 기성세대들은 'MZ세대의 개성과 당당함에 대한 호감', '새로운 가치관을 가진 MZ세대에 대한 흥미'를 보였다. 이에 비해 MZ세대들은 '자신들의 당당함, 발랄함 및 개성 세대라는 점'과 '소소한 성장주의'에 대한 호감을 갖고 있다. MZ세대 외부의 부정감성은 'MZ세대의 결혼기피, 취업난, 빚투자 및 퇴사 트랜드에 대해 걱정', '꼰대 취급하는 MZ 세대 미움', 'MZ세대와 대화하기 힘듦'으로 나타났다. 한편, MZ세대 본인들이 느끼는 부정감성은 '일반화에 대한 거부감', '세대 및 젠더 갈등과 기성세대보다 심한 경쟁에 대한 거부감', '풍요로운 시대의 상대적 실패감', '예고된 기후재앙 속에서 살아야하는 슬픔'으로 나타났다. 따라서 기성세대는 MZ세대를 일반화하여 바라볼 것이 아니라 개인으로 보아야 하며, 세대간 이해와 공감으로 갈등을 완화해야한다. 세대 갈등, 젠더 갈등 및 환경문제 해결을 위한 공동체적인 고민의 필요성도 있다.

Preparation and Characterization of Chemically Stable PVDF-HFP Asymmetric Microfiltration (MF) Membranes

  • Lee, Yeon-Ee;JeGal, Jong-Geon
    • 멤브레인
    • /
    • 제22권2호
    • /
    • pp.104-112
    • /
    • 2012
  • Chemically stable Polyvinylidene fluoride-hexa-fluoropropane (PVDF-HFP) copolymer asymmetric membranes were prepared by the conventional phase inversion process, using Dimethyacetamide (DMAc) as a solvent and water as a non-solvent. To control the pore size and porosity of the PVDF-HFP membranes, tetra-ethoxysilane (TEOS) was used as a pore-forming agent. The prepared membranes were characterized, using several analytical methods such as Fourier Transform Infrared spectroscopy (FTIR), Thermo-gravimetric analyzer (TGA), Field Emission Scanning Electronic Microscopy (FESEM). TEOS turned out to increase porosity and make homogeneous pores on the membranes. Depending on the composition of the dope solutions, the pore size was ranged from 0.1 to 1.0 ${\mu}m$. The flux of the PVDF-HFP membranes prepared by using TEOS as a pore forming agent was increased substantially without much decrease in the rejection. When 15 wt% PVDF-HFP solution was blended with 13 wt% TEOS solution at composition ratio of 70/30 in wt%, the water flux at 2 bars was about 2 $m^3/m^2day$.

방송광고내용규제와 개선방안에 대한 연구 (A Study on the Regulation of Broadcasting Advertising Contents)

  • 김용호
    • 경영과정보연구
    • /
    • 제16권
    • /
    • pp.95-115
    • /
    • 2005
  • Although advertising plays an important role of information source for consumer, also advertising affect negative influence to the consumer and social system. Under the such a concept, this study reviewed the social responsibility of advertising and the freedom of expression including the foreign country's advertising regulation system as the theoretical background of advertising regulation. In addition, this study analyzed the case of the advertisement reviews by Korea Advertising Review Board(august 1, 2000, the business concerning prior deliberation of broadcast advertisements was entrusted to the Korea Advertising Review Board, a civilian self-regulatory body, by the Korean Broadcasting Commission) and Fare Trade Commission. As the result of data analysis, some problems of regulation system and codes are suggested and discussed as follows: (1) the high ratio of rejection (2) using the unnecessary foreign language (3) inconsistency application of deliberation standard.

  • PDF

저전압용 CMOS 온-칩 기준 전압 및 전류 회로 (CMOS on-chip voltage and current reference circuits for low-voltage applications)

  • 김민정;이승훈
    • 전자공학회논문지C
    • /
    • 제34C권4호
    • /
    • pp.1-15
    • /
    • 1997
  • This paper proposes CMOS on-chip voltage and current reference circuits that operate at supply voltages between 2.5V and 5.5V without using a vonventional bandgap voltage structure. The proposed reference circuits based on enhancement-type MOS transistors show low cost, compatibility with other on-chip MOS circuits, low-power consumption, and small-chip size. The prototype was implemented in a 0.6 um n-well single-poly double-metal CMOS process and occupies an active die area of $710 um \times 190 um$. The proposed voltage reference realizes a mean value of 0.97 V with a standard deviation of $\pm0.39 mV$, and a temperature coefficient of $8.2 ppm/^{\circ}C$ over an extended temeprature range from TEX>$-25^{\circ}C$ to $75^{\circ}C$. A measured PSRR (power supply rejection ratio) is about -67 dB at 50kHz.

  • PDF