• 제목/요약/키워드: Reinforcement condition

검색결과 597건 처리시간 0.022초

신형상의 데크플레이트를 이용한 합성슬래브의 구조적 거동에 관한 연구 (A Study on the Structural Behavior of the Composite Slabs Using the New Shaped Deck Plate)

  • 김창우;최성모;강도안;김동규
    • 한국강구조학회 논문집
    • /
    • 제9권4호통권33호
    • /
    • pp.589-600
    • /
    • 1997
  • 냉간성형된 데크플레이트는 건물의 바닥슬래브에 콘크리트 타설시 거푸집용으로만 주로 사용되었으나, 콘크리트와의 일체성을 높임으로써 주인장재 역할을 할 수 있는 합성용 데크가 등장하고 있다. 본 논문은 새로 개발된 합성용 데크의 구조성능 평가를 위한 연구의 결과를 제시하고 있다. 신형상의 데크는 콘크리트와 데크사이의 합성효과를 개선하기 위하여 locking rib와 dove tail 및 강력한 엠보싱이 추가되었다. 콘크리트와 데크플레이트사이의 합성효과를 규명하기 위하여 28개의 실험체가 실험되어 졌다. 본 연구의 중요, 변수는 스팬, 데크플레이트 두께, 지지조건, 지지점에 전단연결재의 유무등이다.

  • PDF

Fly Ash을 이용한 Shotcrete 재료의 개발에 관한 연구 (A Study on Development of Shotcrete Material using Fly Ash)

  • 한오형;강추원
    • 화약ㆍ발파
    • /
    • 제21권2호
    • /
    • pp.21-30
    • /
    • 2003
  • 현재 터널 굴착시 기초 지보수단으로 활용되고 있는 숏크리트는 암반의 굴착 특성상 조기에 얇은 두께로 타설하여도 높은 강도를 유지할 수 있다는 장점 때문에 그동안 우수한 장비와 재료가 개발되어 비약적인 발전을 거듭해 오고 있다. 또한, 계측기술의 발달로 지하암반 거동상태도 조기에 자세히 파악되어 강도와 두께 등 거의 정확한 설계가 이루어지고 있으며, 신소재의 보강재료도 지속적으로 개발되고 있다. 국내 석탄 화력발전소에서 발생되는 석탄회에는 fly ash와 bottom ash가 있으며, 이러한 석탄회는 시멘트, 골재, 건축, 토목 및 농수산 분야에 이르기까지 많은 분야에 기술개발이 되었으며, 연구가 활발히 진행 중에 있다. 따라서, 본 연구에서는 fly ash를 혼합한 콘크리트를 숏크리트 재료로서 활용하기 위해 기존의 숏크리트 배합설계에서 fly ash를 시멘트의 대체재로서 사용할 때, 압축강도의 향상 및 굴착면의 타설 리바운드 율을 저하시키는 최적의 함량에 대하여 실험을 실시하였다. 그 결과, fly ash를 시멘트에 15% 중량 치환했을 때, 약 10%의 압축강도의 향상과 리바운드 율이 6%감소되었다.

지반보강재로서 폐타이어 사용에 따른 환경영향 분석 (Environmental Characteristics of Waste Tire for Use as Soil Reinforcement)

  • 조진우;이용수
    • 한국지반환경공학회 논문집
    • /
    • 제14권1호
    • /
    • pp.61-68
    • /
    • 2013
  • 본 연구에서는 지반보강재로서 폐타이어 사용에 따른 환경영향을 평가하기 위하여 실내실험 및 현장시험시공을 수행하였다. 실내실험을 통하여 폐타이어의 용출특성에 가장 큰 영향을 미치는 폐타이어의 입경과 배수조건을 변화시켜가며 유출수의 pH, 탁도, TOC, Zn 농도를 분석하였다. 또한, 현장시험시공을 통하여 폐타이어를 이용한 보강토 옹벽 시공 후 하부 집수정의 수질을 분석하였다. 입경에 따른 용출실험 결과 폐타이어 입경이 증가할수록 용출농도가 감소하는 것을 확인할 수 있었으며, 이는 비표면적의 차이 때문으로 판단된다. 배수조건에 따른 용출실험 결과 배수조건인 경우 시간이 경과할수록 용출농도가 감소하여 주변 환경에 큰 영향을 미치지 않을 것으로 판단되나, 비배수 조건인 경우 시간이 경과할수록 용출농도가 증가하는 현상을 발견할 수 있었다. 1년간의 현장모니터링 결과 폐타이어로 보강된 옹벽으로부터 발생되는 침출수는 전반적으로 용출농도가 높지 않은 것으로 나타났으며, 침출수 발생 초기에 농도가 증가하다가 이후 점점 감소하여 원수인 우수와 비슷해지는 경향을 나타내었다. 따라서 폐타이어를 지반보강재로 사용함에 따라 발생하는 환경적 영향은 무시할 수 있는 수준임을 알 수 있었다.

통합 뉴스룸 도입 이후 뉴스생산 노동과정의 변화: CBS 통합뉴스룸 사례연구 (Changes in News-Production Labor Process Since The Introduction of Convergent Newsroom : A Case Study on The CBS Convergent Newsroom)

  • 윤익한;김균
    • 한국언론정보학보
    • /
    • 제55권
    • /
    • pp.164-183
    • /
    • 2011
  • 디지털 컨버전스의 기술 혁신은 언론 부문에서 핵심적인 노동이라고 할 수 있는 기자노동에도 막대한 영향을 주고 있다. 노동과정론에 따르면, 자본주의적 생산양식에서 기술혁신으로 인해 노동자들은 노동에 대한 통제력을 상실해가면서 탈숙련화의 과정을 겪어 왔고, 경영진들은 억압적인 노동조건을 은폐하고 노동자들을 더욱 효율적으로 통제하기 위해 이데올로기적, 정치적 장치들을 도입해 왔다. 이러한 문제의식 위에서 본 연구는 뉴스룸 통합의 기술혁신이 기자노동의 숙련도에 어떠한 영향을 주는지, 또 경영진들이 기자들을 통제하기 위해 사용하는 전략이 무엇인지를 CBS 통합뉴스룸의 사례를 통해 실증적으로 분석하였다. 분석 결과, 통합뉴스룸 도입으로 인해 기자들은 숙련노동에 대한 통제력을 상실해가면서 탈숙련화되고 있었다. 또한, 경영진들은 새로운 뉴스생산관행, 가족주의 노사문화에 대한 노동자들의 동의를 획득해 나갔으며, 내부노동시장 분절화를 통해 기업권력의 강화와 노동사회의 고립화 전략을 취하고 있었다.

  • PDF

친환경 리모델링 철거공사 프로세스 모델 개발 (Development a Process Model of Environment-friendly Demolition Works for Aged Housing Remodeling)

  • 황영규;김경래
    • 한국건설관리학회:학술대회논문집
    • /
    • 한국건설관리학회 2008년도 정기학술발표대회 논문집
    • /
    • pp.85-92
    • /
    • 2008
  • 리모델링 공사는 신축공사와 달리 철거공사가 주공정으로 선행되어야 하는데 현행 철거공사는 개략적 수준의 철거관리계획에 의한 생산성만을 강조한 철거 형태로 인해 폐자재 재활용이 되지 않고 있어 자원낭비, 환경파괴를 가중시키고 있으며, 철거작업 중 작업자의 안전과 구조체의 안전등이 전혀 고려되지 않고 철거하는 것이 현실이다. 따라서 친환경 철거공사가 되기 위해서는 프로세스의 개선이 우선 되어야하며 그 단계를 1) 철거관련 조사분석, 2) 철거관리 도서작성, 3) 철거관리 시공계획서작성, 4) 철거시공 및 감리, 5) 철거 후 관리의 5단계로 구분하였으며, 특히 철거도면 작성으로 표준철거 WBS가 구축되고, 철거장비 및 공법, 폐기물 투하, 철거공정계획 수립이 가능하며 마감재 철거 후 구조체의 안전점검을 실시하므로써 철거중 불가피한 보수보강이 가능하며, 철거완료 Check list 작성에 따라 리모델링 본 공사의 Database 활용이 가능하게 되었다. 본 논문에서는 현행 리모델링 철거공사 프로세스(AS-IS)의 문제점을 분석하고 개선된 친환경 리모델링 철거공사 프로세스(TO-BE)를 IDEF0 모델을 사용하여 제안하고자 한다.

  • PDF

제주국제컨벤션센터 컨퍼런스홀의 건축음향 설계 (Room Acoustic Design in International Convention Center Jeju)

  • 주현경;오양기;두세진;김하근
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2003년도 춘계학술대회논문집
    • /
    • pp.802-807
    • /
    • 2003
  • International Convention Center Jeju(ICCJ) was planed and built for accommodating a variety of conventional and exhibitional activities. For a better flexibility of operation, almost all rooms in ICCJ are designed to be subdivided Into a couple of small rooms with installation of movable partition walls. Architectural and acoustical design should be deliberatively and cooperatively undertaken to cope with such a complex condition. Conference hall, the largest room in ICCJ, has a capacity of 5000 seats who:1 used as a whole. It could be divided into 3 halls, one with 2000 pre-installed seats on slanted floor, up/down removable stage and its settings above, and the other 2 flat rooms with no seats installed. A devided hall with pre-installed seats and stage is designed for a multi-use auditorium. Almost all surfaces except ceilings adjacent to the stage are sound absorptively treated, in regard to extensive use of sound reinforcement systems. Its reverberation time 1.65 sec without audience, which is roughly correspond to 1.50 sec with fully occupied audience. When there is a need for a larger room, all the partition wail Is removed and the hall could be used as a whole. Exhibition hall is located in the first floor of ICCJ. Absorption and softness are needed for the hat 1 because exhibition behavior has something noisy features. Perforated MDF panels with porous materials and air space in the back groundare adopted for the walls. There are one large, two medium, and several small convention rooms in ICJJ. The room are also acoustically designed for maximum flexibility with no defects soundwisely.

  • PDF

21C 치과 기공과 교육의 방향에 대한 연구 (A Study on the educational direction of Dental Technology Department in the 21st century)

  • 박종희
    • 대한치과기공학회지
    • /
    • 제21권1호
    • /
    • pp.153-163
    • /
    • 1999
  • The 21st centurt, the era of change-space, is requesting us to readjust our education system. In other words, we should renew it by looking back into the past cultivate more advanced ideas. As a matter of fact junior colleges have been considered just as miniture of universities in every way such as curriculum, prossor emploment, school affairs, etc. Therefore we should change our existing education system not to be criticized for the next century. May students are trained for industry as dental technicians in our department of college. We should educate experiment and practice substantially as college professors as well as exert ourselves in developing our abilities to adapt to high diverse industrial technique, putting emphasis on practice more than theory. It is mecessary for us to sufficiently teach the technique to good students and make them display their abilities in order to produce high quality goods. Reinvestment ineducation is a condition precedent. Dental laboratories have just employed the students that graduated from our college. However it's time for a change. They should pay attention to our education and assist us in all respects with the thought of equally educating professional dental technicians together with us. The field practice system is subject to reinforcement so that our students have more opporunities of utilizing the tools and materials for practice. Finally we should not only carry out new reserch more deeply no less than dental technicians who are experienced in business for development of education system but endeavor to meet pratical education by adding what is pratically needed in dental laboratories to the existing education system.

  • PDF

Developement of the reinforced acrylic-based hybrid denture composite resin with vinyloligosilsesquioxane (POSS)

  • Nam, Kwang-Woo;Chang, Myung-Woo;Chang, Bok-Sook;Han, Dong-Hoo;Shim, June-Sung;Chang, Ik-Tae;Heo, Seong-Joo;An, Jung-Ho;Chung, Dong-June
    • 대한치과보철학회지
    • /
    • 제38권6호
    • /
    • pp.782-790
    • /
    • 2000
  • The mainly used polymeric material for the denture is PMMA because of its cost and easiness to handle. So it was widely used material among dentists for past decades. But the acrylic-based denture materials have several common weak points such as shrinkage after curing and lack of strength. In order to solve these problems, we adapted one of hybrid system using acrylic polymer and vinyloligosilsesquioxane(POSS). POSS, which is a well known expandable monomer during polymerization process, may eventually suppress volumetric shrinkage. And the hybrid system makes it possible for the polymer to be stable in various severe conditions. Eight different kinds of samples were designed and synthesized. Each samples were characterized with dynamic mechanical analyser(DMA) to confirm their thermodynamic properties, fractured to analyze the cross-sectional morphology of the samples. And elongation, flexural and impact tests were also executed to evaluate the mechanical properties of the samples. From the results, hybrid composites had well defined crosslinked network structure compared to the widely used denture materials, and the mechanical strength improved without changing any surface condition as increment with POSS ratio in hybrid system. Fractured morphology showed homogeneous surfaces in spite of mutli component system, therefore we can conclude that the adoption of the POSS brought the reinforcement of the denture resin.

  • PDF

온도가열곡선 변화에 따른 콘크리트의 내화특성 (Properties of Fire Resistance in Tunnel Concrete According to the Changes of Heating Curve)

  • 배장춘;노상균;이찬영;이종석;이장화;한천구
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
    • /
    • pp.705-708
    • /
    • 2008
  • 본 연구에서는 화재시 터널 콘크리트의 안전성 확보를 목적으로, 내화공법 변화에 따른 내화특성을 분석한 것으로서, 그 결과를 요약하면 다음과 같다. RABT온도가열곡선에 따른 내화특성으로, 플레인 콘크리트는 초기의 극심한 고온에 의해 심한 폭렬현상이 발생하였고, 내화공법변화에 따라서는, 유기섬유를 혼입하는 방식과 보드방식의 경우는 폭렬이 방지되는 것으로 나타났으며, 스프레이 방식의 경우는 보강재인 메탈라스가 뿜칠재와 같이 탈락되면서 열응력 등에 의해 구조체 콘크리트가 철근이 노출되는 등 100mm이상 깊이의 심한 폭렬이 발생하였다. RWS 온도가열곡선에 따른 내화특성으로, 유기섬유를 혼입한 경우는 콘크리트 표면이 약 5mm이내 깊이의 융해현상이 발생하였고, 스프레이 방식의 경우는 뿜칠재가 박리되어 구조체 콘크리트가 철근이 노출되는 등 100mm이상 깊이의 심한 폭렬이 발생하였으며, 보드방식의 경우도 보드가 고온에 융해되면서 구조체 콘크리트가 고온에 직접 노출되어 전면적으로 탈락현상이 발생하였는데, 이와같은 특고온 가열조건에서는 특별한 내화대책수립이 필요한 것으로 사료된다.

  • PDF

부직포 배치간격에 따른 화강풍화토의 보강효과에 관한 연구 (A Study on the Reinforcement Effects of Decomposed Granite Soils according to the Spacing Intensity of Non-woven Geotextile)

  • 조용성;이명호;김경신
    • 한국지반신소재학회논문집
    • /
    • 제7권1호
    • /
    • pp.1-6
    • /
    • 2008
  • 본 연구에서는 부직포로 보강된 화강풍화토를 삼축압축시험장치를 이용해 보강재 배치간격에 따른 보강효과를 알아보고자 하였다. 보강토 시료는 일정한 간격의 공간에 준비된 부직포를 수평으로 삽입하여 형성하였다. 여기에 사용된 시료는 4종류이며, UR은 무보강, R-1은 부직포 1층, R-2는 2층, R-3은 3층으로 포설하였다. 이러한 실험결과로부터 부직포로 보강된 보강토는 강도 증가가 뚜렷하게 확인되었으며, 보강층수가 증가할수록 그 경향은 크게 나타났다. 이러한 실험결과로 향후 보강토구조물 설계에 있어서 이론적인 분석법에 활용될 수 있을 것이다.

  • PDF