• 한국건축시공학회지
• /
• 제8권2호
• /
• pp.71-79
• /
• 2008

The rebar work is very related to the safety and durability of the building. Recently, the rebar work is produced some serious problems due to the lack of skillful crafts-man and the rising cost of rebar materials. Many papers have dealt with the rebar work of the manufacturing system in plants with a view to improvement those problems. But, the research on the rebar work of the manufacturing system in field is in a insignificant condition. This study presents the following improvement schemes as a result. First, the education strengthening for evaluation on practical affairs, second, the reinforcement of drawing & management in shop drawing and finally the simplification of apartment rebar work in slab. Also, this paper aims at advancing apartment rebar work by the actual condition survey in slab work. The further research will be needed about the whole structure parts such as foundation, wall, girder and rebar truss-deck plate as one of the improvement methods.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.293-300
• /
• 1999

The maintenance for the stability of tunnel, especially on downtown area, careful check must be considered during construction stage and after. Moreover we have to achieve the stability of tunnel by ground improvement and reinforcement when ground condition is bad or tunnel failures under the various ground conditions. In this paper, it is presented the case of tunnel failure and the state of restoration by ground reinforcements at seoul subway $\bigcirc$-$\bigcirc$ construction site. For the purpose of ground reinforcement, first, curtain wall was established by chemical grouting. Secondly, cement milk grouting was carried by upper part of tunnel crown. Also Boreholes loading test and tunnel monitoring were carried by in failure site for the long term stability of tunnel.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.363-364
• /
• 2002

Although the factors that cause the failure of orthopedic implants were not clearly determined, it was reported that the shapes of wear debris affect the tribological behavior of artificial implant. Many researches were conducted to examine the wear mechanism by debris but the role of debris shape in inflammatory reaction remains unclear. To observe the debris shape by addition of reinforcement, carbon nanotubes ( CNTs ) were added to ultra high molecular weight polyethylene ( UHMWPE ) to investigate the reinforcement effect of CNTs. CNTs which have a diameter of about 10-50 nm, while their length is about 3-5 nm were produced by the catalytic decomposition of the acetylene gas using a tube furnace. Plate on disc type wear test were performed to evaluate the tribological performance of UHMWPE composites reinforced with CNTs in lubricating condition ( bovine serum ). The wear losses of CNT added UHMWPE in bovine serum were significantly reduced. Worn surface and wear debris of UHMWPE with CNTs and without CNTs were compared to investigate the reinforcement effect of CNT on tribological behavior.

• 지질공학
• /
• 제17권1호
• /
• pp.115-123
• /
• 2007

최근 들어 인구증가와 경제발전에 따른 고속도로의 확장 또는 신설이 급증하고 있고 양호한 노선을 위해 터널 건설도 급속도로 증가하고 있다. 이와 더불어 터널 시공 중 붕괴가 발생할 수 있는 경우도 상대적으로 높아지고 있다. 특히, 도로의 양호한 선형 확보를 위하여 지반조건이 불량한 구간에서 터널 굴착이 증가하므로 적절한 보강공법의 적용 없이 굴착을 실시하는 경우에 붕락이 자주 발생하였다. 본 논문에서는 고속도로 터널 시공 중 보편적인 붕괴 사례를 조사함으로써 다른 지질조건에서의 붕괴원인과 형태 및 적용 보강공법에 대해 분석하고자 한다.

• Computers and Concrete
• /
• 제22권5호
• /
• pp.493-500
• /
• 2018

Due to the fact that the ratio of their height to their openings is very large compared to normal beams, there are difficulties in the design and analysis of deep beams, which differ in behavior. In this study, the optimum horizontal and vertical reinforcement diameters of 5 different beams were determined by using genetic algorithms (GA) due to the openness/height ratio (L/h), loading condition and the presence of spaces in the body. In this study, the effect of different mutation operators and improved double times sensitive mutation (DTM) operator on GA's performance was investigated. In the study following random mutation (RM), boundary mutation (BM), non-uniform random mutation (NRM), Makinen, Periaux and Toivanen (MPT) mutation, power mutation (PM), polynomial mutation (PNM), and developed DTM mutation operators were applied to five deep beam problems were used to determine the minimum reinforcement diameter. The fitness values obtained using developed DTM mutation operator was higher than obtained from existing mutation operators. Moreover; obtained reinforcement weight of the deep beams using the developed DTM mutation operator lower than obtained from the existing mutation operators. As a result of the analyzes, the highest fitness value was obtained from the applied double times sensitive mutation (DTM) operator. In addition, it was found that this study, which was carried out using GAs, contributed to the solution of the problems experienced in the design of deep beams.

• 한국공간구조학회논문집
• /
• 제23권1호
• /
• pp.45-52
• /
• 2023

This study proposes an RCS composite damping device that can achieve seismic reinforcement of existing buildings by dissipating energy by inelastic deformation. A series of experiments assessing the performances of the rubber core pad, hysteretic steel slit damping device, and hybrid RCS damping device were conducted. The results showed that the ratios of the deviations to the mean values satisfied the domestic damping-device conformity condition for the load at maximum device displacement in each direction, at the maximum force and minimum force at zero displacement, as well as the hysteresis curve area. In addition, three analysis models based on load-displacement characteristics were proposed for application to seismic reinforcement design. In addition, the validity of the three proposed models was confirmed, as they simulated the experimental results well. Meanwhile, as the shear deformation of the rubber-core pad increased, the hysteretic behavior of super-elasticity greatly increased the horizontal force of the damping device. Therefore, limiting the allowable displacement during design is deemed to be necessary.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• 제9권1호
• /
• pp.47-53
• /
• 1998

이 연구에서는 세 가지 치료조건을 조성하여 각 치료조건간의 반향어 발생률과 치료효과를 비교하였다. 치료조건1(A)은 치료사가 아동에게 쉽고 짧은 질문을 하는 ‘대화조건’ 이고, 치료조건2(B)는 아동이 치료사가 하라는 지시에 따라 쉬운 과제를 수행하는 ‘과제수행조건’ 이고, 치료조건3(C)은 보상과 통제를 사용하는 ‘강화의 조건’ 이다. 연구설계는 A-B-A-B-BC-B-BC를 사용하였다. 이 연구는 발달연령이 3~4세 수준인 2명의 남아(11세, 12세)에게 실시되었는데, 반향어 치료는 1회기에 15분씩, 하루에 5~6회를 2주간 실시하였다. 반향어 치료를 위한 개입은 즉각 반향어에만 적용했고, 지연 반향어는 치료 개입없이 관찰만 하였다. 아동1의 즉각 반향어 치료결과(평균 비율)는 A(99%)-B(65%)-A(95%)-B(10%)-BC(7%)-B(6%)-BC(7%)로 나왔고, 아동2의 치료결과는 A(67%)-B(62%)-A(63%)-B(35%)-BC(8%)-B(4%)-BC(0%)로 나왔다. 아동1의 지연 반향어는 치료 개입 전후를 통해 3% 수준으로 큰 차이없이 낮은수준을 유지했고, 아동2의 지연 반향어는 강화의 조건 병행 전에는 $35{\sim}57%$ 수준이던 것이 강화의 조건 개입 후에는 $5{\sim}9%$ 수준으로 감소하였다. 이 연구의 결론은 대화상황에서 아동의 반향어를 교정하기보다는 아동에게 쉬운 과제를 수행하는 학습환경을 조성해주는 것이 반향어를 감소시키는데 도움이 되고, 과제수행 학습환경에서 과제수행 행동을 보상하고, 반향어 행동을 통제하는 방법을 사용하면, 반향어 감소는 물론 반향어 치료효과가 아동의 전반적인 언어발달에도 긍정적인 영향을 줄 수 있음을 말해주고 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 봄 학술발표회 논문집
• /
• pp.154-159
• /
• 1993

To develop the detailing methods at the ends of flexural shear walls. which are satisfying the ductility requirement corresponding to R = 3.5 and capable of improving the consturctibility, tests of ten isolated cantilever shear walls were carried out under the load condition comprising the cyclic lateral and constant vertical loads. major test parameters include the way of detailing and arrangement of transverse reinforcement in the boundary elements at the ends of walls, and placement of vertical reinforcement. From tests, comparable ductile behavior in test specimens incorporating the channel type of open hoops, compared with those incorporating the regular type of closed hoops, was observed.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.201-217
• /
• 1999

성토지반의 지지력을 향상시키기 위하여 지반개량이나 다짐과 같은 일반적인 방법들이 많이 이용되고 있다. 하치만, 최근에는 내구성이 크고 강한 합성수지와 같은 재료들이 개발되어 실용화됨으로서, 보강토 공법이 널리 적용되고 있는 실정이다. 본 연구에서는, 매트로 보강된 모래지반상의 대상기초에 대한 모형실험을 평면변형률 상태에서 실시하여, 지지력의 증대효과와 지반의 거동을 관찰하였다. 그리고 지지력의 산정식을 개발하여 실험결과와 비교 검토 하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.1083-1088
• /
• 2001

To do performance evaluations about inorganic permanent form mixed in admixture(fly ash, silica fume) and after placed concrete, it is examined reinforcement materials in the permanent form from shear strength, bond strength and flexural strength tests. In this study, permanent form was inserted with reinforcement metal fitting is strength-tested in several method. The result of this study is belows. ⑴ In bond strength test, Most specimens are satisfied with criterion-6 kgf/$cm^{2}$ ⑵ Irrelative with the inserted metal fitting's shape, unevenness and aggregate, Permanent form and after placed concrete have good condition in the shear strength test. ⑶ In flexural test, there is no drop out of permanent form. Most cracks are located in nearby the strain point