• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.199-203
• /
• 2016

An enzyme-free optical method is proposed for estimating high concentrations of glucose in a glucose-lactose mixture, based on a predictive equation that takes advantage of the reflective optical power observed at two discrete wavelengths. Compared to the conventional absorption spectroscopy method based on Beer's Law, which is mainly valid for concentrations below hundreds of mg/dL, the proposed scheme, which relies on reflection signals, can be applied to measure higher glucose concentrations, of even several g/dL in a glucose-lactose mixture. Two probe wavelengths of 1160 and 1300 nm were selected to provide a linear relationship between the reflective power and pure glucose/lactose concentration, where the relevant linear coefficients were derived to complete the predictive equation. Glucose concentrations from 2 to 7 g/dL in a glucose-lactose mixture were efficiently estimated, using the established predictive equation based on monitored reflective powers. The standard error of prediction was 1.17 g/dL.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.2
• /
• pp.53-62
• /
• 2011

Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a proper design of structure of the heliostat reflective surface could be the most important step in the construction of such power plant. The work presented here is a design of structure of optical surface of heliostat, which will be used in 200kW solar thermal power plant. The receiver located at 43(m) high from ground in tower has $2{\times}2$(m) rectangular shape. We first developed the software tool to simulate the energy concentration characteristics of heliostat using the ray tracing technique. Then, the shape of heliostat reflective surface is designed with the consideration of heliostat's energy concentration characteristics, production cost and productivity. The designed heliostat's reflective surface has a structure formed by canting four of $1{\times}1$(m) rectangular flat plate mirror facet and the center of each mirror facet is located on the spherical surface, where the spherical surface is formulated by the mirror facet mounting frame.

• Proceedings of the Optical Society of Korea Conference
• /
• 2001.02a
• /
• pp.127-134
• /
• 2001

With the increasing demands for hand-held devices with lightweight and low-power-consumption displays, the role of reflective liquid crystal displays (LCDs) is becoming more and more important. Especially, the single polarizer mode is considered as a suitable structure for reflective LCDs because it can provide high brightness. However, the single-polarizer LCDs have demerit in that the contrast is lower than double-polarizer LCDs because of the light leakage in thedark state. (omitted)

• ETRI Journal
• /
• v.32 no.2
• /
• pp.248-254
• /
• 2010

We demonstrate a linear bus wavelength-reused gigabit wavelength-division multiplexing passive optical network (WDM-PON) with multiple optical add-drop nodes. A commercially available reflective semiconductor optical amplifier-based WDM-PON has a sufficient power budget to provide multiple optical add/drop nodes in 16 WDM channels. Sixteen 1.25 Gb/s WDM channels are successfully transmitted over 20 km of single-mode fiber with four optical add/drop multiplexers, even with 32 dB reflection and chromatic dispersion in the link.

• ETRI Journal
• /
• v.29 no.6
• /
• pp.817-819
• /
• 2007

A low-stress organic polymer membrane is proposed as a deformable mirror that can be incorporated into a cellular phone camera to achieve auto focusing without motor-type moving parts. It is demonstrated that our fabricated device has an optical power of 20 diopters and can switch focus in 14 ms. The surface roughness of the organic membrane is measured around 15 nm, less than ${\lambda}$/20 of the visible light. With curve fitting, we found that the actuated membrane is almost parabolic in shape, which leads to less aberration than spherical surfaces. It is suitable for reflective-optics systems.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.40.4-40.4
• /
• 2020

Kyung Hee university invented the Transformable Reflective Telescope (TRT) for optical experiment and education. The TRT kit can transform into three optical configurations from Newtonian to Cassegrain to Gregorian by exchanging the secondary mirror. We designed the Ebert-Fastie spectrograph as an extension of the TRT kit. The primary mirror of the TRT kit serves as both collimator and camera lens, and the reflective grating as the dispersing element is placed along the optical axis of the primary mirror. We designed and fabricated the grating holder and the source units using 3D printer. Baffle was also fabricated to suppress the stray light, which was reduced by 83%. The spectrograph can observe the optical wavelength range (4000Å~7000Å). Measured resolving power (R=λ/Δλ) was ~700 with slit width of 0.18mm. The spectrograph is optimized for f/24, and the spectral pixel scale is 0.49Å/pixel with Canon 550D detector. We present the sample spectra of discharged Ne, Ar and Kr gases. The flexible setting and high performance make this spectrograph a useful tool for education and experiment.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.4 no.1
• /
• pp.15-21
• /
• 2005

One of the core technology in WDM-PON system is a generation and modulation technique of the optical source in Optical Network Unit (ONU). In this paper, we propose a reflective semiconductor optical amplifier (RSOA) as a modulator in WDM-PON system. Its performance is analyzed by simulation and actual experimentation. Using RSOA in WDM-PON system as a modulator, it obtains higher gain compared to the conventional SOA due to the double pass gain effect. Furthermore RSOA can provide high gain with comparatively low input power. This is very helpful when we set up the actually system because using lower input power, it can reduce the load of the driving circuit which makes very economical module structure. Therefore, when RSOA is used as a modulator, not only it gives noise suppression effect, but also provides certain amount of gain as well. In addition, comparing with conventional SOA which gives fairly large insertion loss, RSOA can provides more important merits.

• Journal of the Optical Society of Korea
• /
• v.10 no.2
• /
• pp.57-62
• /
• 2006

Adaptive optics (AO) has been applied in various fields including astronomy, ophthalmology and high power laser systems. An adaptive optics system for a high power laser is not significantly different from other AO systems in the point of configuration except that high energy absorbed by the deformable mirror distorts the deformable mirror surface and so degrades system performance. Currently we are researching a bimorph deformable mirror for beam cleaning of a high power class laser. The bimorph mirror was considered to have 99% reflective coating and 1% absorption. So this paper first presents the temperature profiles and corresponding thermal distortions of the bimorph mirror faceplate when the mirror is under a high power lasing for 10 seconds. The analysis was accomplished by the use of finite difference and finite element computer programs to generate the element arrays, calculate the temperature profiles, and determine the structural deformations. Then this paper proposes an 'embedded wafer' type water-cooling system with derived cooling parameters.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.230-235
• /
• 2010

In this paper, we controlled the deposition rate and reflective index with process conditions that are TCP power, gas flow ratio and bias for optical properties of $SiO_2$ thin film using TCP-CVD equipment. We obtained a excellent $SiO_2$ thin film which has a excellent uniformity (<1 [%]), deposition rate (0.28 [${\mu}m$/ min]) and reflective index (1.4610-1.4621) within 4" wafer with process conditions ($SiH_4:O_2$=50 : 100 [sccm], TCP power 1 [kW], bias 200 [W]) at [$300^{\circ}C$].

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.93-98
• /
• 2000

Drive line shape for reflective magneto-optic spatial light modulator has been designed by computer simulation. A factor of 3 improvement in pixel switching sensitivity and power consumption, compared to the conventional reflective magneto-optic spatial light modulator, has been achieved by the use of wedge-shape drive line and a soft magnetic layer. A factor of 2 higher optical efficiency and a factor of 2 simpler fabrication process have been achieved by the use of drive lines that covers most of the surface of pixel and unpatterned insulator.