• Economic and Environmental Geology
• /
• v.25 no.1
• /
• pp.79-85
• /
• 1992

An Interpretation technique is presented to determine strike, dip, velocity and depth of 3-D planar layers from refraction or reflection traveltime curve. This interpretation technique determines the direction of emerging ray from the slope of the traveltime curve and traces the emerging ray to the refractor or reflector. The ray direction in the last layer is used to decide the normal vector to the refractor or reflector from whick its dip, strike and velocity are calculated. The vertical depth to the refractor or reflector is computed by using the intercept or zero-offset time and the ray direction in each layer. Some tests on the interpretation method are performed for the sysnthetic traveltimes generated in 3-D model layers and show that the paramerters of the model layers are accurately determined.

• KIEAE Journal
• /
• v.7 no.3
• /
• pp.63-70
• /
• 2007

It is known that early reflections, their energy and delay times after the arrival of direct sound are important factors for speech intelligibility. In this basis, acoustical parameters like D50 and C80 had been proposed and are widely used for assessing the listening condition of rooms. These parameters are focused on the fraction of the early energy to the total, regardless of the spatial characteristics of the early reflections. This means that all the early reflections, arrived in certain time boundary. from front, behind, down and upside have the same impact on speech intelligibility. From the questionable simplicity, the influence of the direction of early reflections on speech intelligibility is examined in this study. A computer simulation speech intelligibility test, conducted for 22 university students, found that the reflection of vertical direction with method of the Paired comparison also the preference of 0.746 degree was visible an increase.

• Journal of the Optical Society of Korea
• /
• v.9 no.2
• /
• pp.49-53
• /
• 2005

We report a new configuration of a reflection-type confocal scanning optical microscope system for measuring the refractive index profile of an optical waveguide. Several improvements on the earlier design are proposed; a light emitting diode (LED) at 650 nm wavelength instead of a laser diode (LD) or He-Ne laser is used as a light source for better index precision, and a simple longitudinal linear scanning and curve fitting techniques are adapted instead of a servo control for maintaining an optical confocal arrangement. We have obtained spatial resolution of 700 nm and an index precision of $2\times10^{-4}$. To verify the system's capability, the refractive index profiles of a conventional multimode fiber and a home-made four-mode fiber were examined with our proposed measurement method.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1213-1215
• /
• 1994

The shape of lossy material inside a waveguide matched load is optimally designed to give low reflection over a given frequency range. The 3 dimensional vector finite element mettled is used as an analysis tool which does not generate spurious mode. The optimizing process used in this parer is the Powell technique. The designed load gives the low reflection about -30 dB around 10GHz with 1.5 wavelength of the load length.

• Journal of Integrative Natural Science
• /
• v.2 no.2
• /
• pp.82-85
• /
• 2009

Distributed Bragg reflector (DBR) porous silicon (PSi) was generated by an electrochemical etching a bragg structure into a silicon wafer through electrode current in aqueous ethanolic HF solution. DBR PSi exhibiting unique reflectivity was successfully obtained by an electrochemical etching of silicon wafer using square current waveform. The multilayered photonic crystals of DBR PSi exhibited the reflection of a specific wavelength with high reflectivity in the optical reflectivity spectrum. In this work, we have developed a method to create refractive index in Si substrate through intensity of an electric current. The electrochemical process allows for precise control of the structural properties of DBR PSi such as thickness of the porous layer, porosity, and average pore diameter. The number of reflection peak of DBR PSi and its pore size increased as the intensity of electric current increased. This might be a demonstration for the fabrication of specific reflectors or filters.

• Perspectives in Nursing Science
• /
• v.10 no.1
• /
• pp.41-51
• /
• 2013

Purpose: This study was performed to understand the characteristics and the meaning of the illness experience of breast cancer survivors as basic data for the development of an intervention program. Methods: The participants were 25 breast cancer survivors who had completed treatment at a tertiary hospital in Seoul. Data were collected through in-depth and unstructured audio-recorded interviews by the investigator. The participants were asked to describe their illness experience. The data were analyzed according to Giorgi's method for phenomenological analysis. Results: The interview data were organized by theme into 6 categories that emerged from the analysis. The themes were acceptance of the illness, active coping with reality, gaining strength through the support of surrounding people, struggling to overcome a negative mindset, self-reflection, and the pursuit of a meaningful new life. Conclusion: We recommend the development of a survivorship program based on self-reflection, which can engender self-transcendence and spiritual well-being.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.3 no.2
• /
• pp.162-166
• /
• 1993

Spodumene$(LiAlLi_2O_6)$ single crystal was grown by Floating Zone process using the image furnace having the halogen lamp as heat sources. The crystal had the dimension of 50~60mm length and 6~8mm diameter. The colors of as-grown crystals were green, black and pale green respectively. The composition of the crystal was analized by XRD and FUR measurement. Growth orientation was examined by Laue back reflection pattern and for measuring the light transmittance, OPtical transmittance was measured.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.303-313
• /
• 2010

As more and more the social environment change, the companies try to improve industrial structure. The role of enterprise changed direction from position power to communication power. Social contributed activity - representative of social responsible activities in companies - is means of communication with the community and new marketing strategy. The most important element of successful social contributed activity is member's volunteering minds. Volunteer mind based on practical behavioral philosophy. This is right people for company. In this paper, we discussed company social responsibility and suggested standard guide line for voluntary record reflection when the company hire new employees.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.337-338
• /
• 2007

The present paper proposes the method which improves a record and remaking efficiency of the optical pickup as applying the mirror where Phase Shift(PS) principle is applied to optical pickup. Plan to get a circularly polarized light quality above quality which is embodied through Existing Quater Wave Plate(QWP) and a function of total reflection mirror as applying PS mirror which integrates QWP with the function of the total reflection to optical pickup. In the present paper, embody circularly polarized light quality through applying PS mirror to optical pickup, and it through, plan to propose to come true the optimization of recording and remaking CD/DVD disc.

• Journal of Integrative Natural Science
• /
• v.6 no.2
• /
• pp.82-86
• /
• 2013

This paper describes a method for the preparation of porous polymethylmethacrylate showing optical reflectivity from the porous silicon template. A porous polymethylmethacrylate showing optical reflectivity was prepared by replicating porous silicon template which was obtained by applying a computer-generated periodic square current density and resulted in a mirror with high reflectivity in a specific narrow spectral region. A porous polymethylmethacrylate showing an excellent reflectivity was successfully obtained by dissolving the Porous silicon template from the porous polymethylmethacrylate composite film. A porous polymethylmethacrylate exhibited a sharp reflection resonance in the reflectivity spectrum. Surface image of the porous polymethylmethacrylate indicated that the surface of the porous polymethylmethacrylate film had a porous structure. These porous polymethylmethacrylate films in aqueous solutions were stable for several days without any degradation.