• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.2
• /
• pp.35-45
• /
• 2014

Confocal Reflection Microscopy (CRM) was applied to investigate external fibrillation of different types of fibers such as Kajaani reference fiber, Whatman filter fiber, thermomechanical pulp (TMP), and recycled TMP fiber. It was confirmed that the CRM images are created from surface structures of the fiber cell wall. Confocal Laser Scanning Microscopy (CLSM) captured overall shape of the fiber, but minute details of the surface of the fiber were missed. CRM captured the minute details of the fiber surface. From the CRM and CLSM images, it was observed that the CRM images mainly appeared on the fiber surfaces. External fibrillation of the fiber occurs at the fiber surface, not inside the cell wall. Thus, it was concluded that investigation on the external fibrillation of the fiber was possible by utilizing CRM images. A direct qualtitative and quantitative method for analysis of external fibrillation of fiber was demonstrated by utilizing surface area to volume ratio, volume fraction, and roughness calculated from 3-dimensional images reconstructed from stacks of CRM images from the different fibers.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.220-221
• /
• 2005

Sub-bottom profiler(SBP) has been used extensively for the mapping of basement in the foundation design of offshore structure, for pre- and post-dredging operations within harbors and channels, for selection of pipeline routes, sitting of drilling platforms, and in the exploration for an aggregates such as sands and gravels. During the construction of Siwha embankment for irrigation water and the expansion of arable land, the breaking of an embankment unfortunately occurred so that a lot of riprap was swept away and widely dispersed by the tide and strong current. The feasibility study for the construction of the tidal-powered electric plant in Siwha embankment was performed quite recently. Therefore we made use of SBP survey to investigate the distribution of the lost riprap. We could successfully map out the distribution of the lost riprap from the reflection amplitude characteristics of the sediments in SBP data set. We demonstrated the variation of reflection amplitude versus the sediments with and/or without riprap by means of the numerical modeling of acoustic wave equation using finite difference method. Also we examined an amplitude anomaly of the ripraped area through the physical modeling using ultrasonic.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.581-586
• /
• 2017

This paper proposes a GPU based water surface animation and rendering technique for interactive applications such as games. On the water surface, a lot of physical phenomenon occurs including reflection and refraction depending on the viewing direction. When we represent the water surface, not only showing them in real time, but also make them adjusted automatically. In our implementation, we are able to capture the reflection and refraction through render-to-texture technique and then modify the texture coordinates for applying separate DU/DV map. Also, we make the amount of ratio between reflection and refraction change automatically based on Fresnel formula. All proposed method are implemented using OpenGL 3D graphics API.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.3 no.2
• /
• pp.244-250
• /
• 2003

In this paper, the relationship between a slave robot and the uncertain remote environment is modeled as the impedance to generate the virtual force to feed back to the operator. For the control of a tele-operated mobile robot equipped with camera, the tele-operated mobile robot take pictures of remote environment and sends the visual information back to the operator over the Internet. Because of the limitation of communication bandwidth and narrow view-angles of camera, it is not possible to watch the environment clearly, especially shadow and curved areas. To overcome this problem, the virtual force is generated according to both the distance between the obstacle and robot and the approaching velocity of the obstacle. This virtual force is transferred back to the master over the Internet and the master(two degrees of freedom joystick), which can generate force, enables a human operator to estimate the position of obstacle in the remote environment. By holding this master, in spite of limited visual information, the operator can feel the spatial sense against the remote environment. This force reflection improves the performance of a tele-operated mobile robot significantly.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.2
• /
• pp.134-145
• /
• 2003

Purpose: The present study examines symptoms of VDT syndrome perceived by those nurses reviewing the application of health insurance at hospitals. This study also investigates those factor influencing on the experience of VDT syndrome among those nurses. Method: Data were collected through mail questionnaire survey in April, 2003. Of the 250 questionnaires disseminated, 214 questionnaires were finally analyzed using descriptive statistics and multiple regression analysis through SPSS/PC version 10.0. Result: Of the VDT syndrome, the musculoskeletal symptom score was highest, followed by ophthalmologic symptoms. The musculoskeletal symptoms were higher among younger nurses, having smaller space under the desk, and feeling uncomfortableness of the chair. The ophthalmologic symptoms were higher among those with a bachelor's degree, younger nurses, and those having a light reflection on the computer monitor, and those maintaining less than 40cm between eyes and the monitor. Higher dermatologic symptoms were observed among younger nurses and those using unclear monitor. The psychological symptoms were higher among younger nurses, those having a light reflection on the monitor, those unable to control the height of their chair, and those using uncomfortable chair. The overall symptoms were higher among younger nurses, those having a light reflection on the monitor, and those smaller space under the desk. Conclusion: Primary intervention should be given to those nurses with symptoms of VDT syndrome in order to regain health and prevent further aggravation of the symptoms. In particular, self-care behaviors of the nurses using VDT should be promoted with administrative support.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.23 no.4
• /
• pp.463-473
• /
• 2017

Purpose: The purposes of study was to evaluate the effect of debriefing using reflection questions and writing on the critical thinking disposition, self-efficacy, and clinical judgement ability in simulation of post-operative care of abdominal surgery. Methods: The research method was a nonequivalent control group no-synchronized design. The study period was from August 22 to 30, 2016. The subjects were comprised of 34 people in the experimental group and 36 in the control group. In a simulation session for post-operative care of abdominal surgery, the treatment of the experimental group was to debrief for 30 minutes using Lasater's reflection questions and writing. For the control group, a typical debriefing was conducted in the same environment. Results: Critical thinking disposition, self-efficacy, and clinical judgement were significantly higher in the experimental group than the control group. Conclusion: To enhance the critical thinking disposition, self-efficacy, and clinical judgement of nursing students in simulation, it is recommended to debrief using reflection questions and writing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.722-729
• /
• 2013

This paper presents the influence on the transmission characteristics of dimensional tolerances of rectangular waveguides usually used as a low-loss transmission line in the millimeter-wave band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a post is calculated by using internal impedance in order to investigate the influence of dimensional tolerances of the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.68-72
• /
• 2002

Localization with array sensors has been applied for not only military but also non-military purposes. The identification of submarines and fish finding are those examples. Nowadays the demand for noise identification is increasing to characterize noise sources and improve acoustic performance of underwater acoustic equipment. For that reason KRISO/KORDI recently constructed an anechoic basin which bus reflection only at the free surface. This paper suggests a noise identification methods using MUSIC algorithm in such an acoustic field. For comparison phase delay sum and minimum valiance methods are also described. At first basic principles are described. A several numerical simulations are also performed. The results say that reflection effect many cause a new non-real source although good estimation is obtained under no reflection conditions.