• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.211-217
• /
• 2001

Czochralski법에 의한 ZnWO₄단결정을 [100], [101], [001] 방향으로 성공적으로 성장시켰다. 각 축 방향에 따른 성장조건이 rotation speed, pulling rate, 성장된 결정의 직경 등의 변수를 가지고 조사되어졌다. 성장된 결정의 냉각시 발생되는 균열을 annealing 효과에 의하여 방지할 수 있었다. 성장된 결정의 방위는 Laue back reflection으로 결정하였다. 각 축 방향으로 성장된 결정의 미세구조적 특징이 논하여졌으며, 경도, 열팽창계수 및 유전상수의 물리적 특성이 평가되어졌다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1419-1424
• /
• 2006

We could reduce the reflection from PET(polyethylene terephthalate) film surface by natural plasma etching which does not use etch masks. The plasma etched PET film showed lower reflectance and higher transmittance which is resulted by making subwavelength structure(SWS) on the film surface by the plasma etch rate difference between the amorphous and crystalline region in the surface of PET film.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.942-944
• /
• 2009

Blue phase shows several different reflection colors from the randomly oriented domains and crystal direction. Also there are variations in the size of domains. The domain size is dependent on the temperature gradient. With smaller cooling rate of temperature, the domain size was increased compared with rapid cooling. With injection of light of specific wavelength, we find that the diffraction patterns were occurred around the light spot in the cell of blue phase. It was supposed to be from the matching of the phase retardation and domain size. However, actually the diffraction pattern is reflecting the lattice structure in double twist of the blue phase. The lattice constant from the radius of diffraction patterns shows very similar one from the reflection spectrum, which indicates the internal lattice constant in double twist of the blues phase.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.35-40
• /
• 2012

In this study, the ultraviolet (UV) intensity of polymer insulator was measured using the Anti-Reflective (AR) coating lens on the occurrence of corona discharge. The UV intensity was compared before and after the AR coating. Under the 200-260[nm] of UV lens, the reflection rate before AR coating was 7.5~5.5[%] with 85-89[%] of transmission rate. After AR coating, however, the reflection rate decreased to 1.3~1.22[%] with improved transmission (97.4~97.6[%]). Then, the UV intensity by distance was measured in the polymer insulator. According to the measurement, the UV intensity increased 6.5 times at 37.5[%] of Vm/Vbd with 5[m] of distance. As distance increased, the growth rate declined. As high voltage increased, in addition, AR coating was less effective due to the count error caused by the UV sensor pulse signal overlap. Therefore, it appears that it would be more effective to detect corona discharge with 5[m] or less of distance at diagnosis of power facilities by AR coating and UV sensor sensitivity.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.667-670
• /
• 1999

As the number of reference patterns increase in the text dependant speaker recognition, the recognition performance of the system degrades. So, if reference patterns were decreased the high recognition rate can be obtained. It’s because the speaker recognition can obtain the high discrimination. In this paper, to decrease the number of reference patterns, we choose candidate reference patterns to perform pattern matching with test pattern by high order component of the reflection coefficients of the uttered speech signal Consequently the total recognition rate of the proposed method is about 2% higher than that of the conventional method.

• 대한가정학회지
• /
• 제40권5호
• /
• pp.15-24
• /
• 2002

The following research conclusions were made, relative to the experiments of the textiles of fire fighters Protective Clothing. 1. When the body protection efficiency such as the thickness, the strength and heat resistance are considered, Nomex(N) is tuned out the best outer shelf, Gore-tex(KG) the best moisture barrier, and Wool-felt(WC) the best thermal barrier. 2. In the hygienic and sanitary efficiency also, N is turned out the best outer shelf, KG the best moisture barrier, and WC the best thermal barrier in its degree of water resistance, water vapour permeability, and air permeability. 3. In the washing and maintenance efficiency, too. N is turned out the best outer shell, KG the best moisture barrier, and WC the best thermal barrier, being considered the material's rate of contraction, the changing rate of frame resistance, water resistance, and water vapour permeability. 4. When considered the frame resistance against the reflection tape and reflection efficiency, O is the best material for it marks the highest score in the frame resistance and reflective effect.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.144-152
• /
• 2013

In an effort to find the optimum porous of Taewoo through the mathematical model 2 - dimensional tank water experiment among the approached to a problem related to ocean engineering, this study analyzed the porosity by dividing it into 9 cases. As the wave penetrates through the longitudinal porous of the Taewoo model, it was found that there is a wave energy loss because of the phenomenon of the separation of the porous due to the eddy. Looking into the general tendency based on the wave-height meter (probe) data, it was found that the shorter wavelength and higher frequency area, the more reflection coefficients increased, but in contrast, the longer wavelength and lower frequency area, the transmission coefficients showed the increasing trend and energy dissipation was in a similar way with reflection coefficients. In addition, it was found that the bigger the porosity was, the narrower distribution range of reflection coefficients was, and the more its average value decreased. On the other hand the transmission coefficients in direct opposition to reflection was found to show the wider range and the more gradual increase in the average value as porosity was the bigger around the average value. In contrast, energy dissipation rate was found to increase linearly as porosity increased the more around the porosity of 0.2518 but it decreased gradually around the peak point. Through the above results, it is judged that the porous of optimum in the longitudinal direction of the Taewoo model perforated plate was about 2.6cm because it was found that the porosity which produced the lowest reflection and transmission coefficient and the highest energy dissipation. As a result of comparing this to the case where there was no porosity at all, it showed the function of wave absorbing about 31.60%.

• 한국해양공학회지
• /
• 제28권3호
• /
• pp.227-235
• /
• 2014

Using a 3-D numerical scheme (LES-WASS-3D) that considered wave-structure-sandy seabed interactions in a 3-D wave field, we analyzed the wave reflection and hydraulic characteristics inside a slit caisson with two chambers in a 3-D oblique wave field. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with existing experimental results and found good agreement. The numerical analysis revealed that a standing wave field is generated on the front side of the slit caisson due to the effect of wave reflection. For incident waves propagating perpendicular to the slit caisson, the nodes and anti-nodes of the standing wave are apparent and symmetrical. However, in an oblique wave field, as the incident wave angle decreases, the nodes and anti-nodes of the standing wave become ambiguous and unsymmetrical. It was also found that the wave reflection coefficient decreases as the incident wave angle decreases. It can be pointed out that as the incident wave angle decreases, the turbulent intensity in the chamber increases. Thereby, the increased wave energy dissipation by the increased turbulent intensity reduces the rate of wave reflection. In addition, a strong turbulent intensity generally occurs in the first chamber.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.341-346
• /
• 2010

본 논문에서는 반응성 스퍼터링(Reactive Sputtering) 공정으로 $Si_xO_y$ 박막과 $Si_xN_y$ 박막을 4층 구조로 적층하고 400~700 [nm]의 가시광 영역에서 빛의 반사를 줄이기 위한 반사방지 코팅(Anti-Reflection Coating)으로의 응용 가능성을 조사하였다. 스퍼터링 타겟으로 6 [inch] 직경의 Si 단결정을 사용하였고, 반응성 스퍼터링 가스는 $Si_xO_y$ 박막 증착에서 Ar과 $O_2$를, $Si_xN_y$ 박막 증착에서는 Ar과 $N_2$를 사용하였으며, 스퍼터링 파워로는 DC pulse를 사용하였다. 1,900 [W] DC pulse power에서 Ar:$O_2$=70:13 [sccm]의 반응성 스퍼터링으로 2.3 [nm/sec]의 증착률과 1.50의 굴절률을 보이는 $Si_xO_y$ 박막을 제작하였고, Ar:$N_2$=70:15 [sccm]의 반응성 스퍼터링으로 1.8 [nm/sec]의 증착률과 1.94의 굴절률을 보이는 $Si_xN_y$ 박막을 제작하였다. 이 두 종류의 박막을 이용해서 시뮬레이션을 통해 4층 구조의 반사방지 코팅 구조를 설계한 후, 설계결과에 따라 각 박막의 두께를 순차적으로 변화시켜 증착하였다. 4층 구조 $Si_xO_y-Si_xN_y$의 반사도 측정 결과 550 [nm] 대역에서 1.7 [%]의 반사와 400 [nm]와 650 [nm] 영역에서 1 [%]의 반사를 보였으며, 가시광 영역에서 성공적인 "W" 형태의 반사방지 코팅 특성을 보였다.

• 한국통신학회논문지
• /
• 제16권5호
• /
• pp.458-467
• /
• 1991

본 논문에서는 기존의 선형예측기법의 문제점을 선형예측계수, ar필터의 POLE위치, 포만트-밴드폭의 관점에서 분석하고, 정문반사계수의 영향을 정도추정이론에 따라 분석했으며, 이러한 분석을 근거로 하여 포만트 밴드폭 정규화 방법을 보완하였다. 정분반사계수를 1로 변경하여 정문의 영향을 정규화되어 포만트가 최적으로 강조된 스펙트럽이 된다. 이 전형예측계수는 앞뒤로 대칭되면서, 표준편차가 정문반사계수를 변경시키지 않은 성형예측계수보다 증가하므로써, 음성부호화시에 bit rate을 50%로 줄일 수있으면서 정보의 양을 그대로 보존하고 있음을 알수 있었다. 이러한 포만트 밴드폭을 0으로 정규화하는 방법을 이용하여 한국어 5개 모음을 포만트에 의해서 소음환경에서 인식하기 위한 실험을 실시하여 96.7%의 인식율을 얻을 수 있었다.