• Proceedings of the KOSOMBE Conference
• /
• v.1985 no.06
• /
• pp.15-19
• /
• 1985

This study deals with a kind of signal processing, Kalman filtering techniques, which are applied to ultrasound signal to improve resolution capability. The main advantage of Kalman filter algorithm for the analysis of reflected ultrasound signal is its recursive structure which can be easily adapted to time-varing system. In state-space description of the system, the 6th order system produces the best spectral approximation to the source pulse. As a result of spectrum analysis, 6th order estimator for two closely spaced (0.5mm) reflectors enhance resolution by 4dB - 10dB. By using this result, the possibility to detect even minute tumor is found.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.399-404
• /
• 2004

Recently GPS has been playing an increasingly important role in geodesy and positioning, for example, car navigation system, surveying, ITS(intelligent transport systems), LBS(Location Based Service) and so on. For telematics application, reception conditions of GPS signal are important. In some situation, such as in areas between buildings, metropolitan areas or areas with large skyscraper complexes, there are situations whereby the satellite signal is seriously restricted by various obstacles. Before the signal arrives at the receiver, it may be blocked, reflected, delayed, attenuated or scattered by terrestrial obstacles such as buildings. In this paper, we present satellite imagery data for telematics application. Therefore, for propriety of this studies, we made a GPS satellite visibility experiments in Bun-Dang on same time. This paper describes an approach to calculate building level using 0.6m, 1m, 6.6m resampling aerial polo imagery in stead of the satellite imagery and make a comparative study of accuracy. This paper tests the simulation of GPS signal using the building level.

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.11-15
• /
• 2002

High speed probe for measurement of sin91e flux quantum circuits is comprised of coaxial cables and microstrip lines in order to carry high speed signals without loss. For the impedance matching between coaxial cable and microstrip line, we have determined the dimension of the microstrip line with 50${\Omega}$ impedance by simulation and then have investigated the effect of line width and cross-sectional shape of signal line, dielectric material, thickness of soldering lead at the coaxial-to-microstrip transition Point, and the an91c between dielectric material and end part of the signal line on the characteristics of signal transmission of the microstrip line. From the simulation, we have found that these all parameter's had influenced on the characteristic of signal transmission on the microstrip line and should be reflected in fabricating high speed probe, We have also determined the dimension of coplanar waveguide to fabricate testing sample for performance test of high speed probe.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.910-916
• /
• 2010

A modern artillery use a FMCW Proximity Fuze for effectively target destruction. FMCW Proximity Fuze can be deceived by Jamming Technique because it uses RF for distance estimation. FMCW Proximity Fuze algorithm is similar to FMCW radar's, but normal Jamming Tech. like Noise and Mulitone is useless. Most Shots with FMCW Proximity Fuze have a additional mechanical fuze against RF Jamming. Shots explode by mechanical fuze when Proximity Fuse is Jammed. However, distance Deception is available because shots can not distinguish between deception jamming signal and ground reflected signal. For making Distance Deception Jamming, FMCW signal tracking is demanded. In this paper, we propose a FMCW tracking method and develop the Jammer to show Jamming signal.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.1
• /
• pp.6-12
• /
• 2010

Fiber optic sensor using fiber Bragg grating(FBG) probes is used for monitoring strain and temperature distributed on the wide surfaces of large structures. In this paper, in order to use many FBG probes in one optical fiber line, we propose a complex multiplexing technology which is composed of two techniques, one is time division multiplexing and another is wavelength division multiplexing. However, we only investigate the characteristics of time division multiplexing because FBG sensors basically can be operated by wavelength division multiplexing. We calculate the optimal reflectivities and the lengthwise location of five FBG probes in serial connection in order to obtain the unique reflected intensities from the FBG probes. We fabricate five FBG probes with the reflectivities of 13%, 16%, 25%, 40% and 80%, which are determined by the theoretical calculation, and observe the signal reflected from each FBG in the time domain from the experiment. There are differences between experimental and theoretical results caused by the signal noise and the differences of reflectivities of FBG probes. But the experimental results shows the reflected signals of five FBG probes which prove the availability of complex multiplexing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.6
• /
• pp.433-440
• /
• 2018

A radar receives reflected signals from various objects to detect a target. Undesired object, called clutter, as well as the target generates reflected signals. The clutter radar cross section(RCS) is dependent on many factors, which are the antenna pattern, distance between the radar and the target, and the height of the target and the radar. Herein, surface clutter RCS for ground-based radar is analyzed, and the effect of the surface clutter RCS on the received signal is investigated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.3
• /
• pp.139-145
• /
• 1992

In this paper, a technique to separate the incident and reflected waves in the flume tests is investigated. Using a least squares method, the separation technique has been formulated systematically. This method is applicable to the regular and irregular wave conditions. To illustrate its validity and applicability, numerical experiments have been carried out for both regular and irregular wave conditions. It was found that the method gives perfect results for the conditions without signal noises, and yields reasonable results even for the conditions with 30% signal noises of incident wave height. Hydraulic experiments have been also performed to prove its applicability of the method for real situations.

• Korean Journal of Optics and Photonics
• /
• v.8 no.2
• /
• pp.165-168
• /
• 1997

We have constructed a scanning confocal microscope using a 780 nm semiconductor laser, an actuator of a compact disk player and a quad-detector. This device detects heights and characteristics of a surface. The laser focus was located at the surface of a sample by using the error signal obtained by a quad-dector, and the current supplied to the actuator for lens was displayed as a height. The materials of a surface were classified according to reflected total intensities and was displayed by different color in a monitor. The device has very samll dimensions of 30 mm$\times$20 mm$\times$20 mm and scan field is 1.6 mm$\times$1.6mm. We obtained two images, one using only reflected light and the other using an error signal from a quad-detector and compared these two images.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.56-62
• /
• 2013

A technique is presented that uses a circular waveguide for the measurement of the bulk shear (S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fundamental torsional mode that propagate along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using fundamental torsional mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities are evaluated as a function of depths. Also the characteristics of the reflected signal from the defects are examined and the reflection coefficients are calculated for identifying the relation between defect sizes and the magnitude of the reflected signal.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.151-157
• /
• 2009

In this paper, we proposed an algorithm of redeye correction. For naturally redeye correction, we assumed positions of the redeye at an image which produced redeye, and we estimated rate of the redeye to apply the appropriate redeye correction suitably. We extract and label pixels those are possible of generating redeye using red, skin and reflected light color. The each labeled group is decided by rates of length and width, dimension, density, the color of white of the eye and reflected light color of groups for the redeye group. We corrected positions of redeye using blurring effect, naturally. In the case of designing the proposed algorithm, we designed the redeye correction hardware using the minimum of memories for efficiency of hardware.