• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.154-161
• /
• 2009

A fuel cell power plant is a very complex system which has various control loops with some non-linearity. For control of a fuel cell power plant, dynamic models of fuel cell stacks have been developed and simplified process flow diagrams of a fuel cell power plant has been presented. Using such a model of a Molten Carbonate Fuel Cell (MCFC) power plant, this paper deals with development of an intelligent setpoint reference governor (I-SRG) to find the optimal setpoints and feed forward control inputs for the plant power demand. The I-SRG is implemented with neural network by using Particle Swarm Optimization (PSO) algorithm based on system constraints and performance objectives. The feasibility of the I-SRG is shown through simulation of an MCFC power plant for tracking control of its power demand.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.5
• /
• pp.432-437
• /
• 2008

This paper proposes a defect cell extraction algorithm for TFT-LCD auto-repair system. Auto defect search algorithm and automatic defect cell extraction method are very important for TFT-LCD auto repair system. In the previous literature[1], we proposed an automatic visual inspection algorithm of TFT-LCD. Based on the inspected information(defect size and defect axis, if defect exists) by the automatic search algorithm, defect cells should be extracted from the input image for the auto repair system. For automatic extraction of defect cells, we used a novel block matching algorithm and a simple filtering process in order to find a given reference point in the LCD cell. The proposed defect cell extraction algorithm can be used in all kinds of TFT-LCD devices by changing a stored template which includes a given reference point. Various experimental results show the effectiveness of the proposed method.

• Journal of Communications and Networks
• /
• v.13 no.4
• /
• pp.367-376
• /
• 2011

In this paper, we propose self-organizing schemes for the initial configuration of the neighbor cell list (NCL), maintenance of the NCL, and physical cell identifier (PCI) allocation in heterogeneous networks such as long term evolution systems where lower transmission power nodes are additionally deployed in macrocell networks. Accurate NCL maintenance is required for efficient PCI allocation and for avoiding handover delay and redundantly increased system overhead. Proposed self-organizing schemes for the initial NCL configuration and PCI allocation are based on evolved universal terrestrial radio access network NodeB (eNB) scanning that measures reference signal to interference and noise ratio and reference symbol received power, respectively, transmitted from adjacent eNBs. On the other hand, the maintenance of the NCL is managed by adding or removing cells based on periodic user equipment measurements. We provide performance analysis of the proposed schemes under various scenarios in the respects of NCL detection probability, NCL false alarm rate, handover delay area ratio, PCI conflict ratio, etc.

• Proceedings of the Zoological Society Korea Conference
• /
• 1998.10b
• /
• pp.314.1-314
• /
• 1998

No Abstract, See Full Text

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.2
• /
• pp.99-104
• /
• 2011

In this paper, the intelligent landscape lighting power control and monitoring system with solar sell generator equipment is proposed. The first, the intelligent landscape lighting power controller is designed using the fuzzy logic control method. And the fuzzy logic controller is used to save power consumption for various reference intensity of the illumination. The second, the GUI monitoring system is presented. It has control and display faculty. And the practical experiment device is used to evaluate the performance criteria of the proposed intelligent landscape lighting power control system with the solar cell power generation equipment. From the experiment results, we present the property of proposed fuzzy controller such as steady state error, the tracking and power consumption characteristic for the reference intensity of illumination. And also we show the superiority of power control as well as the characteristic of GUI monitoring system in the proposed system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1139-1143
• /
• 1991

Using industrial robots and sensors, we developed an inline car body inspection system which proposes high flexibility and sufficient accuracy. Car Body Inspection(CBI) cell consists of two industrial robots, two corresponding carriages, camera vision system, a process computer with multi-tasking ability and several LDS's. As industrial robots guarantee sufficient repeatabilities, the CBI cell adopts the concept of relative measurement instead of that of absolute measurement. By comparing the actual measured data with reference data, the dimensional errors of the corresponding points can be calculated. The length of the robot arms changes according to ambient temperature and it affects the measuring accuracy. To compensate this error, a robot arm calibration process was realized. By measuring a reference jig, the differential changes of the robot arms due to temperature fluctuation can be calculated and compensated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.367-367
• /
• 2011

CIGS solar cell with copper, indium, gallium and selenium is a second generation solar cells for the lowering of the manufacturing cost. The relative ratio of the four elements is one of the most important measurement issues because the photovoltaic property of CIGS solar cell depends on the crystalline structure of the CIGS layer. However, there is no useful analysis method for the composition of the CIGS layer. Recently, AES depth profiling analysis of CIGS films has been studied with a reference material certified by inductively coupled plasma optical emission spectroscopy. However, there are some problems in AES depth profiling analysis of CIGS films. In this study, the in-depth profiling analysis was investigated by secondary ion mass spectrometry (SIMS) depth profiling analysis. We will present the compositional depth profiling of CIGS films by SIMS and its applications for the development of CIGS solar cells with high efficiency.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.77-79
• /
• 2007

The phase angle of the utility voltage is used in current control of grid-tied fuel cell power converter. Therefore if the detection of phase angle is a problem, Current control is affected by the distorted phase angle. This paper presents a problem of synchronous reference frame PLL algorithm for single-phase systems and proposes compensated synchronous reference frame PLL algorithm. The proposed method helps power quality improvement of grid-tied fuel cell power converter under distorted utility conditions. Simulation and experimental results are presented to demonstrate the validity of the proposed method.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.136-141
• /
• 1996

In this paper, a new CMOS on-chip current reference circit for memory, operational amplifiers, comparators, and data converters is proposed. The reference current is almost independent of temeprature and power-supply variations. In the proposed circuit, the current component with a positive temeprature coefficient cancels that with a negative temperature coefficient each other. While conventional curretn and voltage reference circuits require BiCMOS or bipolar process, the presented circuit can be integrated on a single chip with other digiral and analog circits using a standard CMOS process and an extra mask is not needed. The prototype is fabricated employing th esamsung 1.0um p-well double-poly double-metal CMOS process and the chip area is 300um${\times}$135 um. The proposed reference current circuit shows the temperature coefficient of 380 ppm/.deg. C with the temperature changes form 30$^{\circ}C$ to 80$^{\circ}C$, and the output variation of $\pm$ 1.4% with the supply voltage changes from 4.5 V to 5.5 V.

• 한국전기화학회:학술대회논문집
• /
• 2003.07a
• /
• pp.75-78
• /
• 2003