• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.3
• /
• pp.23-30
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• Journal of Sericultural and Entomological Science
• /
• v.18 no.2
• /
• pp.107-110
• /
• 1976

In silk reeling process the carry-over cocoons must be submerged in the reeling baths filled with reeling water and left until reopening the operation. Under the detention the carry-over cocoons are apt to decay without any antiseptic treatment. Thus an useful antiseptic for the cocoons is urgently needed, and various antseptic agents have been tested for their applicability to the process. However, such an useful agent has not been developed yet. Formalin has been the only chemical used for antisepticizing carry-over cocoons, although it has many defects as the antiseptic for the cocoons. In these circumstances, recently we newly prepared an antiseptic useful for preventing the carryover cocoons from decaying. We named the new antiseptic preparation "Swi-Se-Yo." The Korean term "Swi-Se-Yo" literally means "please take a rest". Through a series of experiments with Swi-Se-Yo we obtained the following results: 1) Swi-Se-Yo, in 0.05% aqueous solution, exerted a good antiseptic effect on the boiled Cocoons submerged in the reeling baths and the effect lasted for 45 hours. The duration of the effect is about two times longer than that of Formalin. 2) The percentage of cocoon reel ability of the carry-over cocoons treated with Swi-Se-Yo was 6% higher than that of Formalin and was equal to that of flowing cold water. 3) The percentage of raw silk yield of the carry-over cocoons treated with Swi-Se-Yo was almost equal to that of Formalin and to that of flowing cold water. 4) The quality of raw silk of the carry-over cocoons treated with Swi-Se-Yo is the same as that of flowing cold water. Besides the above favourable results, Swi-Se-Yo has many advantages as an antiseptic. Chemically it is very stable. Its antimicrobial action is very strong and the spectrum is very broad. It can be available in water-soluble powder and in small bulk. And it is not harmful to human and domestic animals. Considering these profitable properties of Swi-Se-Yo, it will have a good reputation as a carry-over cocoon antiseptic. (The chemical composition and manufacturing method of Swi-Se-Yo will be published in the near future.)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11b
• /
• pp.287-294
• /
• 2000

Calculation of the flexural rigidity value (EI) is indispensable for prescription of deflection characteristics of crop stalks in harvesting□Conventionally□EI has been determined by either average EI of the whole stalk or average EI of each stems divided into node through the calculation method of cantilever with homogeneous section□However□deflection characteristics of crop stalks caused by mechanical operation such as combine harvester were not exactly presumed by these conventional EI through the experiment by authors. Further, actual EI of a stalk changes in company with a change of moisture contents as time passes during the experiment. Finally, efficient calculation method for determining EI is needed in order to improve these problems. In this study, mechanical model based on actual structure of the crop stalk with variety sectional area was proposed. This mechanical model is calculated by the theory of cantilever with continuous stages. Therefore, improvement of both calculating accuracy on EI and efficiency of measuring system was tried. At first, this calculation method was applied to piano wire of which EI was recognized in advance. As a result, EI calculated from this new method coincided approximately with piano wire's EI. Next, applying to crop stalks as same as piano wire, relationship between loads acting on crop stalks and deflection values calculated by EI using this new calculation method was exactly presumed in comparison with conventional method. Further, measuring time of deflection test was greatly reduced. Finally, new calculation method of EI will be available for estimating mechanical characteristics of so many kinds of crop stalks in harvesting operation. Further, in this study, new deflection test using image-processing apparatus by computer will be introduced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1619-1625
• /
• 2012

An electrical steel strip is commonly used as a core material in all types of electric transformers and motors. It is produced by a cold rolling process. In this paper, a damage-mechanics-based approach that predicts the edge fracture of an electrical steel strip during cold rolling is presented. We adopted the normal tensile stress criterion and the fracture energy method as a damage initiation criterion and a damage evolution scheme, respectively. We employed finite element analysis (FEA) to simulate crack initiation and propagation at the initial notch located at the edges of the strip. The material constants required in FEA were experimentally obtained by tensile tests using a standard and a notched sheet-type specimen. The results reveal that the edge crack was initiated at the entrance of the roll bite and that it rapidly evolved at the exit. The evolution length of the edge crack increased as the length of the initial notch as well as the front tension reel force of the strip increased.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.324-324
• /
• 2012

투명전도체(Transparent Conducting Oxides: TCOs)는 일반적으로 면저항이 $103{\Omega}/sq$ 이하로 전기가 잘 통하며, 가시광선영역인 380~780 nm에서의 투과율이 80% 이상이고, 3.2eV 이상의 밴드갭을 가지는 재료로써, 전기전도도와 가시광선영역에서 투과성이 높아 전기적, 광학적 재료로 관심을 받아 다년간 연구대상이 되어오고 있다. 현재 가장 널리 사용되고 있는 투명전도체(Transparent Conducting Oxides: TCOs) 소재로는 Indium Tin Oxide (ITO)가 가장 각광받고 있지만, Indium의 가격상승과 박막의 열처리를 통해 저항이 증가하는 단점을 가지고 있어 이를 대체 할 새로운 소재 개발이 필요한 상황이다. 그러므로 투명전도체 소재 개발에 있어서 가장 중요한 연구과제는 Indium Tin Oxide(ITO)의 단점을 개선시키고 안정된 고농도의 In-Zn-Sn-O(ITZO) 박막을 성장시키는 것이다. 본 연구에서는 RF스퍼터링법에 의하여 Si wafer에 In-Zn-Sn-O(IZTO)를 $350{\AA}$ 만큼 증착시키고, 1시간 동안 $300^{\circ}C$, $350^{\circ}C$, $400^{\circ}C$로 각각 열처리 하였다. 박막의 전자적, 광학적 특성은 XPS(X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy)를 이용하여 연구하였다. XPS측정결과, ITZO박막은 In-O, Sn-O and Zn-O의 결합을 가지고 있고, 박막의 열처리를 통해 $400^{\circ}C$에서 Zn2p의 피크가 가장 크게 나타나는 반면 In3d와 Sn3d는 열처리를 했을 때가 Room Temperature에서 보다 피크가 작아지는 것을 확인하였다. 이는 $400^{\circ}C$에서 Zn가 표면에 편석됨을 나타낸다. 그리고 REELS를 이용해 Ep=1500 eV에서의 밴드갭을 얻어보면, 밴드갭은 $3.25{\pm}0.05eV$로 온도에 크게 변화하지 않았다. 또한 QUEELS -Simulation에 의한 광학적 특성 분석 결과, 가시광선영역인 380nm~780nm에서의 투과율이 83%이상으로 투명전자소자로의 응용이 가능하다는 것을 보여주었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.345-345
• /
• 2011

MgO는 암염구조를 가진 전형적인 이온 결합성 화합물로서 7.8eV의 띠틈을 갖고 흡습성이 강하다. 면 방전 구조 PDP에서 MgO 보호막은 면 방전으로 인한 유전층의 식각을 보호하고 2차 전자 방출을 통해 방전 전압을 낮추는 역할을 한다. 하지만 MgO 보호막은 증착시 흡수된 수분이 제거되어야 하고, 방전 특성 개선 및 방전 효율 향상을 위해 가공 처리에 관한 연구가 진행 되어야 한다. 본 연구는 MgO 보호막의 전자적 특성의 변화를 알아보기 위해 $O_2$ 분위기에서 전자빔 증착법을 이용해 MgO Powder를 사용하여 시료를 제작하였다. 표면에 흡착된 수분제거로 인한 특성 변화를 알아보기 위해 진공 챔버내에서 시료를 $500^{\circ}C{\sim}550^{\circ}C$의 열처리를 실시한 후 XPS(X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy), UPS(Ultraviolet photoelectron Spectroscopy)를 이용하여 전자적 특성을 연구하였다. XPS 측정결과 시료의 열처리를 통해 C1s spectrum의 O-C=O(289eV) binding energy가 없어져 박막에 흡착된 불순물이 제거 되었으며 O1s spectrum에서 Hydroxides가 감소하고 530.0eV의 MgO 결합에너지쪽으로 커짐으로써 박막의 구조를 확인할 수 있었다. 그리고 $O^2$ 분위기에서 성장시킨 MgO 박막 기판을 열처리 후 REELS를 이용해 띠틈을 얻어보면 Ep=500eV에서 띠틈이 6.77eV, Ep=1500eV에서 띠틈이 7.33eV로 각각 측정되었다. Ep=500eV의 REELS 스펙트럼으로부터 산소 결함에 의한 표면 F Center는 4.22eV로 확인되었다.

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.123-128
• /
• 2010

It is investigated the development of swine liquid manure spreading system for a polyethylene film (PE vinyl) based greenhouse used for planting vegetables. These types of vinylhouses are normally six to eight meters wide; the spread system must be contained and capable of operating within this area. The system we designed for use here consisted of the following parts: 1) a reel for loading the hose, 2) hydraulic motor and cylinder to generate hydraulic pressure, 3) discharge unit, and 4) a frame with a 3-point hiteh link to the tractor. With this system, there are two types of hoses that can be used, a flexible flat hose that can be mounted directly to a tractor or a solid firm round hose which usually separated from the tractor. In either case, the discharge unit remains on the tractor. It is found that by using our spread system overall efficiency was 5 times greater than spreading swine liquid manure manually.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4C
• /
• pp.295-307
• /
• 2002

The IEEE 1394 protocol is a de facto standard in multimedia digital home network. It supports several advanced features such as hot plugging, dynamic network reconfiguration, isochronous transmission and so on. Since the IEEE 1394 was adapted in the field of multimedia service with QoS guarantee, back bone network protocol with reel-time digital instrumentation and control sub networks, and physical layer protocol for real-time middleware such as real-time CORBA, the additional real-time features has been required in device driver implementation because of the necessity of the predictability enhancement. To guarantee the real-time features, the device driver of the IEEE 1394 should support the priority based packet processing and also need a isochronous buffer management mechanism to deal with the periodic isochronous communication. In this paper, we proposed a new software architecture of the IEEE 1394 device driver for supporting the real-time characteristics such as priority based packet processing, priority based scheduling and so on.

• The Korea Journal of Herbology
• /
• v.21 no.1
• /
• pp.25-31
• /
• 2006

Objectives : We investigated the aniti-aging effects of the cosmetic products with Pinus densiflora on human skin by using non-invasive instruments. Methods : We made cosmetic products containing the extract of the needles of red pine, and measured physiological effects such as skin wrinkles, clarity, evenness, lifting, corneocyte exfoliation after volunteers applied the cosmetic products for 8 weeks. Results : We observed a skin lifting effect and a decrease in corneocytes amount after using the cosmetic products for 4 weeks. And the wrinkles, evenness and clarity of face skin improved significantly. Conclusion : We concluded that the cosmetic products containing the extract of the needles of reel pine had an anti-aging effect on the human face skin.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.66-77
• /
• 2003

The purpose of this study is to propose a standard putting green management program to prepare fast green suitable for international golf tournaments, and to conform whether the reported green speed model can be applied to the real field situations. The west course of Lakeside Country Club was selected for the case study. This study was initiated on August 1st, 2001 and continued through October 4th, 2001. The results are summarized as follows: 1. Following the long-term schedule, 'penncross' creeping bentgrass turf was mowed at 5.0mm(37days), 4.5mm(8days), 4.0mm(4days), 3.5mm(2days), 3.2mm(2days), 3.0mm(2days), 2.8mm(2days) and the mowing direction was changed daily. Variation of mowing height was reduced to a minimum range. Core aerification with deep tines was applied 19 days prior to the first practice round. Dry sand maintenance was top-dressed 2 times at 1.5mm/$m^2$ on the 17th day and 1.0mm/$m^2$ on the 10th day. Minimum irrigation was applied to keep the turf alive. During the tournament preparation week, dew on the putting greens was removed by using a sponge roller. Following the dew removal, the greens were cut once each morning at a height of 2.8mm. The mower used was the 21 inch working behind mower equipped with a tournament bedknife and 11 reel blades. Following the mowing, the peens were rolled with a light-weight roller in one direction in the morning. Rolling was used as a finishing technique to ensure that the surface was as smooth as possible, and to provide true ball roll and maximum green speed. In conclusion these management practices satisfied the daily green stimpmeter readings required for USGA championship play. 2. During the period of tournament preparation, no damage was observed on the green, but scalping in green edge appeared in about 0.39% of the total area of 18 greens in the west course.