• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.13-17
• /
• 1990

In this paper we propose the force controller using a neural network for a redundant manipulator. Jacobian transpose matrix of a redundant manipulator constructed by a neural network is trained by using a feedback torque as an error signal. If the neural network is sufficiently trained well, the kinematic inaccuracy of a manipulator is automatically compensated. The effectiveness of the proposed controller is demonstrated by computer simulation using a three-link planar robot.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1125-1128
• /
• 1998

A new architecture for high-speed implementation of adaptive decision-feedback equalizer (ADFE) applicable to wide-band digital wireless modems is described. Rather than using conventional two's complement arithmetic, a novel complex-valued filter structure is devised, which is based on redundant binary (RB) arithmetic. The proposed RB complex-valued filter reduces the critical path delay of ADFE, as well as leads to a more compact implementation than conventional methods. Also, the carry-propagation free (CPF) operation of the RB arithmetic enhances its speed. To demonstrate the proposed method, a prototype chip set is designed. They are designed to contain two complexvalued filter taps along with their coefficient updating circuits, and can be cascaded to implement loger filter taps for high bit-rate applications.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.322-334
• /
• 2014

Multimedia content is very sensitive to packet loss and therefore multimedia streams are typically protected against packet loss, either by supporting retransmission requests or by adding redundant forward error correction (FEC) data. However, the redundant FEC information introduces significant additional bandwidth requirements, as compared to the bitrate of the original video stream. Especially on wireless and mobile networks, bandwidth availability is limited and variable. In this article, an adaptive FEC (A-FEC) system is presented whereby the redundancy rate is dynamically adjusted to the packet loss, based on feedback messages from the client. We present a statistical model of our A-FEC system and validate the proposed system under different packet loss conditions and loss probabilities. The experimental results show that 57-95%bandwidth gain can be achieved compared with a static FEC approach.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.215-226
• /
• 2016

Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperbolic function, we get a new algorithm which enables reducing the chattering effect of the real actuators, which together with the learning and adaptive controllers, is applied to the model and to the real robot. A simulation environment including the actuator dynamics is elaborated. A 5 DOF robot, a communication interface and a signal conditioning circuit are designed and implemented for feedback. Three control laws are executed in: a simulation structure (together with the dynamic model of the SCARA type redundant manipulator and the actuator dynamics) and a real redundant manipulator of the SCARA type carried out using MatLab/Simulink programming tools. The results, obtained through simulation and implementation, were represented by comparative curves and RMS indices of the joint errors, and they showed that the redundant manipulator, both in the simulation and the implementation, followed the test trajectory with less pronounced maximum errors using the adaptive controller than the other controllers, with more homogeneous motions of the manipulator.

• 제어로봇시스템학회논문지
• /
• 제8권11호
• /
• pp.963-969
• /
• 2002

Design method of a robust impedance control is proposed for the kinematically redundant manipulators. To achieve this objective, we first use the momentum feedback disturbance observer(MFDOB) scheme which can handle the nonlinear dynamics of a manipulator in Joint space. An extended task space formulation to describe the behaviors of task and null spaces of redundant manipulator is employed. Using the extended task space formulation and disturbance observer scheme, a robust impedance control method is designed. The performance of the proposed extended impedance controller is verified through experiments with a planar three links direct-drive manipulator.

• 대한인간공학회지
• /
• 제24권3호
• /
• pp.29-34
• /
• 2005

Little research has been performed regarding auditory icons even though auditory icons have great potentials as a strategy for creating informative, intuitively accessible, and unobtrusive interface. Therefore, this study was conducted to design new auditory icons through the iconic mapping for ten most frequently used mobile phone menus, and to show the usability of auditory icons. Two most familiar auditory sounds for each menu were collected and compared to the current button-pressing sound. The results show that the newly designed auditory icons had shorter recognition times, better satisfaction than the current icons. In other words, auditory icons could be an effective interface to provide a redundant feedback along with visual feedbacks in navigating mobile devices.

• 대한전기학회논문지
• /
• 제39권3호
• /
• pp.301-311
• /
• 1990

A multiple controller structure consisting of a typical feedback controller and an additive redundant controller is proposed for enhancing the reliability of the control system. For the case where the main controller is chosen as a pole assignment controller with input/output measurements and the redundant controller as the Model Reference Adaptive Controller (MRAC) whose reference model is the closed-loop combination of the plant and the main controller, it is proven that the tracking error between the command input and plant output converges to zero under failure in one of the controllers or parameter perturbations of the plant, and further that the reliability measured by Mean Time To Failure (MTTF) is greater than that of the system with only a single main controller. A simulation Example is provided to illustrate reliable operation of the proposed control system against the controller failure.

• 한국산업융합학회 논문집
• /
• 제17권1호
• /
• pp.27-34
• /
• 2014

This paper proposes a new approach to the designed of visual feedback control system based on visual servoing method. The main focus of this paper is presented how it is effective to use many features for improving the accuracy of the visual feedback control of industrial articulated robot for assembling and inspection of parts. Some rank conditions, which relate the image Jacobian, and the control performance are derived. It is also proven that the accuracy is improved by increasing the number of features. The effectiveness of redundant features is verified by the real time experiments on a SCARA type robot(FARA) made in samsung electronics company.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.35-42
• /
• 2013

This paper proposes a new approach to the designed of visual feedback control system based on visual servoing method. The main focus of this paper is presented how it is effective to use many features for improving the accuracy of the visual feedback control of industrial articulated robot for assembling and inspection of parts. Some rank conditions, which relate the image Jacobian, and the control performance are derived. It is also proven that the accuracy is improved by increasing the number of features. The effectiveness of redundant features is verified by the real time experiments on a SCARA type robot(FARA) made in samsung electronics company.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.60-69
• /
• 2000

광대역 무선 디지털 통신 시스템용 파이프라인 적응 결정귀환 등화기(pipelined adaptive decision-feedback equalizer; PADFE)를 0,25-${\mu}m$ CMOS 공정을 사용하여 full custom 단일 칩으로 설계하였다. ADFE의 동작속도를 향상시키기 위해 DLMS(delayed least-mean-square)을 적용한 2-stage 파이프라인 구조로 설계하였다. PADFE의 필터와 계수갱신 블록 등 모든 연산을 redundant binary(RB) 수치계로 처리하였으며, 2의 보수 수치계를 사용하는 기존의 방식에 비해 연산량의 감소와 동작속도의 향상이 얻어졌으며, 또한 전체적인 구조의 단순화에 의해 VLSI 구현이 용이하다는 장점을 갖는다. COSSAP을 이용한 알고리듬 레벨 시뮬레이션을 통해 파이프라인 stage 수, 필터 tap 수, 계수 및 내부 비트 수 등의 설계 파라메터 결정과 bit error rate(BER), 수렴속도 등을 분석하였다. 설계된 PADFE는 약 205,000개의 트랜지스터로 구성되며, 코어의 면적은 41.96\times1.35-mm^2$이다. 시뮬레이션 결과, 2.5-V 전원전압에서 200-MHz의 클록 주파수로 동작 가능할 것으로 예상되며, 평균 전력소모는 약 890-mW로 예측되었다. 제작된 칩의 테스트 결과로부터 기능이 정상적으로 동작함을 확인하였다.