• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.597-599
• /
• 2019

OFDM 시스템에서 송신단의 IFFT(inverse fast fourier transform) 이전에 주파수 영역에서 높은 크기의 임펄스를 삽입하면, 쌍대성 특성으로 인해 시간영역의 OFDM 신호의 PAPR 감소 효과를 가져올 수 있다. 본 논문에서는 CQAM(cross quadrature amplitude modulation) 방식을 채용하는 OFDM 통신시스템에서 송신단의 IFFT 이전에 임펄스를 삽입함으로서 개선되는 PAPR 성능을 분석한다. 또한 PAPR을 최소화시킬 수 있는 최적의 임펄스 삽입위치 찾아내고 이를 적용하였을 경우의 PAPR 개선효과를 검증한다.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.283-290
• /
• 2021

Recently, correlated superposition coding (CSC) has been proposed to implement non-orthogonal multiple access (NOMA) without successive interference cancellation (SIC), without loss of spectral efficiency, in contrast to conventional independent superposition coding (ISC). However, correlation between signals has reduced the average total allocated power, which results in degraded performance. Thus, in order to avoid the reduction of the average total allocated power owing to correlation between signals, this paper proposes a cross-correlated quadrature amplitude modulation (QAM) NOMA scheme under Rayleigh fading channel surroundings. First, we design the cross-correlated QAM NOMA scheme. Then, simulations demonstrate that for the weaker channel gain's user, the symbol error rate (SER) performance of the proposed cross-correlated QAM NOMA improves largely, whereas for the stronger channel gain's user, the SER performance of the proposed cross-correlated QAM CSM NOMA degrades little, compared to that of the conventional QAM NOMA.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1682-1685
• /
• 2004

Gas Turbine combustors for power plant can be reduced NOx emissions using lean premixed combustion technology. But the combustors are likely to occur combustion oscillations which damage operation reliability and mechanical life of the gas turbines. In this paper, characterizations of oscillation in a gas turbine combustor for power plant are presented. Combustion dynamics occur $1{\sim}1.5$ psi in amplitude with low frequency less than 140Hz during normal operation. An abnormal high level dynamics, 2.0 psi amplitude occur at 125 Hz frequency. Abnormal combustion oscillation is reduced by modulation of fuel supply valve control schedule.

• 정보처리학회논문지C
• /
• 제10C권4호
• /
• pp.455-462
• /
• 2003

SRTS 지터와 포인터 조정 지터의 감소 방식에 대하여 연구하였다. 스타핑 지터를 감소시키기 위하여 여러 연구들에서 제시되었던 비트 리킹, 판별 경계치 변조 그리고 시그마-델타 변조 방식들을 실제 SRTS 및 포인터 조정 장치에 적용하여 발생되는 지터의 성질을 컴퓨터 시뮬레이션에 의한 방법으로 분석하였다. 위 방식들을 적용한 장치에서 발생되는 포인터 조정 지터는 기존의 지터보다 그 크기가 절반 이하로 감소되며, SRTS 지터는 시스템 파라미터에 따라서 기존의 지터보다 그 크기가 증가 또는 감소하는 것이 밝혀졌다.

• 한국전자파학회논문지
• /
• 제21권9호
• /
• pp.965-970
• /
• 2010

NC-OFDM(Non-Contiguous Orthogonal Frequency Division Multiplexing) 기반의 무선 통신 시스템은 많은 부반송파의 수로 인해 높은 PAPR(Peak-to-Average Power Ratio)을 갖는다. Comb type pilot은 시변 채널 추정에 있어서 block type pilot보다 낮은 계산 복잡도를 가지며 더 효율적이다. 그러나 CAZAC(Constant Amplitude Zero Auto-Correlation) 행렬 변환이 뛰어난 PAPR 저감 효과를 보임에도 불구하고, comb type pilot이 데이터 심볼에 삽입되게 되면 PAPR이 다시 증가하는 문제가 있다. 따라서, 본 논문에서는 이러한 comb type pilot 배치로 인해 증가된 PAPR을 개선하기 위해 추가적으로 새로운 방식의 SLM(Selective Mapping)을 적용하였다. 또한, 본 논문에서 사용된 새로운 방식의 SLM 기법은 일반적인 SLM 기법과 달리, SLM의 선택 정보를 전송하기 위한 추가적인 대역폭을 사용하지 않음으로써 대역 효율을 높인다. 따라서, 본 논문에서 제안된 시스템은 제한된 주파수 대역을 이용하여 고효율의 데이터 전송을 얻을 수 있다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.149-152
• /
• 2004

A new joint source channel coding reduces both input-width and average current consumption to transmit image data to LCD source drivers. As a source coding, it is based on entropy coding of differential pulse code modulation scheme, especially using median edge detector of image predictor. As a channel coding, it is not a simple pulse amplitude modulation, but linked by source entropy to reduce average amplitude. Simulation results show 1/4 width is achievable by 16-valued transmission with keeping conventional current consumption (0.36 to 1.3).

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.198-203
• /
• 2010

In this paper, study on the mode characteristics analysis of the SH-EMAT (shear horizontal, electromagnetic acoustic transducer) waves for evaluating the thickness reduction in plates such as corrosion and friction is presented. Noncontact methods for ultrasonic wave generation and detection have been a great concern and highly demanded due to their capability of wave generation and reception on surface of high temperature or on rough surface. Mode identification of the SH-EMAT wave is carried out in an aluminum plate with thinning defects using time frequency analysis method such as wavelet transform, compared with theoretically calculated group velocity dispersion curve. The changes of various wave features such as the amplitude and the time-of-flight have been observed and the correlations with the thickness reduction have been investigated. Firstly, experiments have been conducted to confirm that it is possible to selectively generate and receive specific desired SH modes. These modes have then been analyzed to select the parameters that are sensitive to the thickness change. The results show that the mode cutoff and the time-of-flight changes are feasible as key parameters to evaluate the thickness reduction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1439-1443
• /
• 2007

In this paper, vibration reduction techniques of a voice coil motor (VCM) actuator are presented for AFM imaging system. The damping coefficient of the actuator driven by VCM with a flexure hinge is quite low and it cause the about 30dB peak amplitude response at the resonance frequency. To decrease this peak response, we design and apply elliptical band-stop filters to xy and z axis VCM actuator. Frequency response of each actuator with filter is measured to verify the effect of the filters. As a sensor, capacitive sensor is used. Vibration reduction rate of the xy actuator with the filter is also measured while real AFM scanning condition. As another method, closed loop control with the capacitive sensor is applied to the xy axis actuator to add an electrical damping effect and vibration reduction rate measured. These vibration reduction rates with each method are compared. In the case of z axis actuator, the frequency response of force (gap) control loop is measured. For comparison, the frequency response using a conventional PID controller is also obtained. Finally, the AFM image of a standard grid sample is measured with the designed controller to analyze the effect in the AFM imaging.

• Ocean and Polar Research
• /
• 제42권4호
• /
• pp.293-301
• /
• 2020

Blades of tidal stream turbines have to sustain many different loads during operation in the underwater environment, so securing their structural safety is a key issue. In this study, we focused on periodic loads due to wave orbital motion and propose a load reduction method with a blade design. The flap of an airplane wing is a well-known structure designed to increase lift, and it can also change the load distribution on the wing through deflection. For this reason, we adopted a passive flap structure for the load reduction and investigated its effectiveness by an analytical method based on the blade element moment theory. Flap torsional stiffness required for the design of the passive flap can be obtained by calculating the flap moment based on the analytic method. Comparison between a flapped and a fixed blade showed the effect of the flap on load reduction in a high amplitude wave condition.

• 생물정신의학
• /
• 제24권4호
• /
• pp.188-195
• /
• 2017

Objectives Schizophrenia is characterized by disturbances in perception and cognition. Attenuated mismatch negativity (MMN) reflects central auditory dysfunction in schizophrenia. The aim of this study is to compare MMN changes before and after treatment in schizophrenia patients and to assess their association with treatment response. Methods Twenty-three schizophrenia patients underwent an oddball paradigm. MMN was calculated by the difference waveforms of the event-related potentials (ERPs) elicited by subtracting standard from deviant stimulus. The clinical symptoms were measured by the Positive and Negative Syndrome Scale (PANSS), the Psychotic Symptom Rating Scale (PSYRATS). Follow-up evaluation was conducted when the PANSS total score decreased by 30% or more (treatment response group) or before discharge (non-response group). Results The treatment response group showed significantly larger MMN amplitude improvement and latency reduction than the non-response group after treatment (Fz ; mean amplitude p = 0.035, FCz ; p = 0.041). The auditory hallucination group showed shorter latency than that of the group without hallucinations. Additionally, auditory hallucination was associated with prolonged MMN latency and shortened after treatment in the auditory hallucination response group (Fz ; p = 0.048). Conclusions These results suggest that the attenuated MMN amplitude reflects the progression of the disease. The increment of MMN amplitude and shortening of latency after treatment may reflect cognitive functional recovery of central auditory sensory processing.