• Journal of Bio-Environment Control
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2005

This study was conducted to develop a chain conveyor-type, row-spacing system for a plant factory. The developed system was evaluated for its practical use in growing plants. Results are intended to provide technical suggestions on the row spacing for hydroponically grown vegetables in a plant factory. The designed row-spacing system for a plant factory could be adjusted by four stages with a conveying speed range of $5.3\~15.8cm{\cdot}s^{-1}$ and with a row-space range of 10-25cm. The torque of driving shaft was measured with a torque range of 11.7-33.3 N$\cdot$m according as a trough weight changes with a range of $17\~935$ N. A measured value was $5.9\~9.8\;N{\cdot}m$ lower than a theoretical value. Travel reduction rate was shown up $1.6\~1.9\%$. The conveying time of trough was shown up 2.24 seconds in case that the designed value was 2.26 seconds. The system was evaluated to be functioning effectively according to the initial design factors in the test.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.5-26
• /
• 2001

Many studies have reported that regular aquatic exercise can lead to improvement of health for patients suffering from arthritis. In spite of these benefits, the adherence rate has shown as few as 26% of patients with arthritis who had completed the aquatic exercise education program. Moreover, when patients with arthritis begin an aquatic exercise, 47% withdraw within the first 6 month. No study has been found that constructs model to explain aquatic exercise adherence of patients with arthritis. The purpose of this study were to identify the factors influencing exercise adherence and to construct and test a structural model to explain aquatic exercise adherence of patients with arthritis. Hypothesized model was constructed on the basis of Bandura's social cognitive theory and literature review. Exogenous latent variables included in this model are group cohesion and barrier, endogenous latent variables are self-efficacy, outcome expectancy and self-evaluation. Empirical data used was collected through individual interviews with the structural questionnaire on 249 patients with arthritis who had completed the 6-week aquatic exercise education program of Korean Rheumatology Health Professionals Academy. The interviews were performed from September 6, 1999 through October 8, 1999. A model tested by the covariance structural analysis with LISREL 8.12a program and by descriptive statistics and correlation with SAS 6.12 program. The results are summarized as follows: First, hypothesized model showed a good fit to the empirical data. In the modified model added one new path showed a much better fit. Second, group cohesion had a direct, indirect positive effects, self-efficacy and self evaluation had a direct positive effects on exercise adherence. Barrier had a direct, indirect negative effects on exercise adherence. Outcome expectancy had a direct negative effect, indirect positive effects through self-evaluation on exercise adherence, but total effects was not significant. Total effect size of the variables were group cohesion, self-efficacy, barrier and self evaluation in order. All variables accounted for 54% of the total variance of exercise adherence in the model. In conclusion, this model confirmed to be proper in explaining of aquatic exercise adherence. Group cohesion, self-efficacy, outcome expectancy, self-evaluation, barrier contributed to the aquatic exercise adherence of patients with arthritis. The results of this study suggested that improvement of group cohesion, self-efficacy and self-evaluation, motivation of outcome expectancy through self-evaluation, and reduction of the barrier should be included in the strategy of nursing intervention for the aquatic exercise adherence of patients with arthritis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6191-6196
• /
• 2012

Aims and Background: Traditional chemotherapy strategies for human leukemia commonly use drugs based on cytotoxicity to eradicate cancer cells. One predicament is that substantial damage to normal tissues is likely to occur in the course of standard treatments. Obviously, it is urgent to explore therapies that can effectively eliminate malignant cells without affecting normal cells. Our previous studies indicated that ginsenoside $Rg_1$ ($Rg_1$), a major active pharmacological ingredient of ginseng, could delay normal hematopoietic stem cell senescence. However, whether $Rg_1$ can induce cancer cell senescence is still unclear. Methods: In the current study, human leukemia K562 cells were subjected to $Rg_1$ exposure. The optimal drug concentration and duration with K562 cells was obtained by MTT colorimetric test. Effects of $Rg_1$ on cell cycle were analyzed using flow cytometry and by SA-${\beta}$-Gal staining. Colony-forming ability was measured by colony-assay. Telomere lengths were assessed by Southern blotting and expression of senescence-associated proteins P21, P16 and RB by Western blotting. Ultrastructural morphology changes were observed by transmission electron microscopy. Results: K562 cells demonstrated a maximum proliferation inhibition rate with an $Rg_1$ concentration of $20{\mu}\;mol{\cdot}L^{-1}$ for 48h, the cells exhibiting dramatic morphological alterations including an enlarged and flat cellular morphology, larger mitochondria and increased number of lysosomes. Senescence associated-${\beta}$-galactosidase (SA-${\beta}$-Gal) activity was increased. K562 cells also had decreased ability for colony formation, and shortened telomere length as well as reduction of proliferating potential and arrestin $G_2$/M phase after $Rg_1$ interaction. The senescence associated proteins P21, P16 and RB were significantly up-regulated. Conclusion: Ginsenoside $Rg_1$ can induce a state of senescence in human leukemia K562 cells, which is associated with p21-Rb and p16-Rb pathways.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.100-106
• /
• 2007

The objective of this study was to evaluate the efficiency of $(NH_4)_2HPO_4$, $Na_2HPO_4{\cdot}12H_2O$, $CaHPO_4{\cdot}2H_2O$, $Ca(H_2PO_4)_2{\cdot}H_2O$ and $H_3PO_4$ for the stabilization of soils contaminated with multi-metals containing Pb, Cd and As. The application rate of stabilizers to soils was determined based on $PO_4/Pb_{total}$ molar ratio of 0.5, 1, 2, 4. The results of Korea Standard Test and TCLP (EPA Method 1311) showed the reduction of metal leachabilities below the regulatory limits for Pb and Cd when $H_3PO_4$ and $Ca(H_2PO_4)_2{\cdot}H_2O$ were applied. However, stabilization efficiency for Cd was low and in case of As leaching concentration increased rather. It is considered that $PO_4$ reacted effectively $Pb^{2+}$ due to leaching Pb under low pH condition created by adding $H_3PO_4$. Accordingly Pb was stabilized by dissolution and precipitation of hydroxypyromorphite. From the change of metals fraction using sequential extraction procedure when $H_3PO_4$ applied as a stabilizer, we confirmed that residual fraction increased more than 60% and this result was accorded with XRD analysis that detected only hydroxypyromorphite peak in $H_3PO_4$.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.406-417
• /
• 2012

In this study, eco-friendly hybrid composite boards were manufactured from green tea, three kinds of charcoals and wood fiber for developing interior materials to reinforce the functionalities such as the deodorization and the absorbability on the green tea-wood fiber hybrid boards in the previous researches. The effects of kind of raw materials and the component ratio of raw materials on dimensional stability, deodorization and emission of formaldehyde were investigated. Thickness swelling of the hybrid composite boards increased with increasing of component ratio of green tea and charcoals, but the values were markedly lower than that of Korean standard (KS) for commercial medium density fiber board (MDF), except for hybrid composite boards composed of greed tea, activated charcoal and wood fiber. Reduction rate of ammonia gas for the hybrid composite boards composed of green tea, activated charcoal and wood fiber showed a high value of 96% after 30 minute from the beginning of the test, and the other hybrid boards also showed a high value of about 95% after one hour. Emission amount of formaldehyde was similar to that of $E_0$ grade in case of using $E_1$ grade urea resin, and was similar to that of super $E_0$ grade in case of using $E_0$ grade urea resin.

• Journal of the HCI Society of Korea
• /
• v.1 no.1
• /
• pp.21-28
• /
• 2006

Most of the commercialized wearable text input devices are wrist-worn keyboards that have adopted the minimization method of reducing keys. Generally, a drastic key reduction in order to achieve sufficient wearability increases KSPC(Keystrokes per Character), decreases text entry performance, and requires additional effort to learn a new typing method. We are faced with wearability-usability tradeoff problems in designing a good wearable keyboard. To address this problem, we introduced a new keyboard minimization method of reducing key pitch. From a series of empirical studies, we found the potential of a new method which has a keyboard with a 7mm key pitch, good wearability and social acceptance in terms of physical form factors, and allows users to type 15.0WPM in 3 session trials. However, participants point out that a lack of passive haptic feedback in keying action and visual feedback on users' input deteriorate the text entry performance. We have developed the One-key Keyboard that addresses this problem. The traditional desktop keyboard has one key per character, but the One-key Keyboard has only one key ($70mm{\times}35mm$) on which a 10*5 QWERTY key array is printed. The One-key Keyboard detects the position of the fingertip at the time of the keying event and figures out the character entered. We conducted a text entry performance test comprised of 5 sessions. The participants typed 18.9WPM with a 6.7% error rate over all sessions and achieved up to 24.5WPM. From the experiment's results, the One-key Keyboard was evaluated as a potential text input device for wearable computing, balancing wearability, social acceptance, input speed, and learnability.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.679-695
• /
• 2014

In this paper we survey the career awareness, demand, and preparation of the students of the department of mathematics education and provide basic data for establishment of career diversification strategies. For this we examined the followings: (1) department selected time and motivation, (2) satisfaction with the selection and training courses, (3) hope and change for a career after graduation, (4) related jobs and career awareness. As a result, most of the students over the course of the high school and middle school chose a career in mathematics education, the biggest motivation appeared to be due to selection was deemed suitable for individual aptitudes. Due to this reason he/she is satisfied with the selection and training process and the curriculum of mathematics education appeared to think it would be helpful to his/her career. It can be observed that the number of students increased to think of another job, depending on the grade ascent. Mostly due to the difficulty of major study as grade up, high competition and low success rate of teacher employment test, employment reduction in the number of teachers.

• Polymer(Korea)
• /
• v.25 no.1
• /
• pp.133-141
• /
• 2001

The friction and wear properties of carbon-carbon composites made with different weight percent of $MoSi_2$ as an oxidation inhibitor were investigated using a constant speed wear test apparatus in an oxidation environment. The results indicated the carbon-carbon composites undergoing an abrupt transition of friction coefficient, from low-friction behavior(${\mu}$=0.15~0.2) during normal wear regime to the high-friction behavior(${\mu}$=0.5~0.6) during dusting wear regime at the frictional temperature range of 150~180${\circ}C$. The existence of temperature-dependent friction and wear regimes implied that the performance of specimen made with carbon-carbon composites was markedly affected by the thermal properties of the composites. The carbon-carbon composites filled with MoSi2 exhibited two times lower coefficient of friction and wear rate in comparison with the composites without $MoSi_2$. Especially, the composites containing 4wt% $MoSi_2$ filler showed a significantly improved activation energy for wear due to the reduction of both the porosity and powdery debris film formation on sliding surface when compared to those without $MoSi_2$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.2
• /
• pp.218-221
• /
• 2002

Whole forage sorghum (saccharatum) cultivar FS5 was harvested at the soft dough ($303{\pm}9g\;kg^{-1}$ DM) stage of maturity. The sorghum was chopped into approximately 20 mm pieces and ensiled under laboratory conditions in 1.5 L Weck glass jars. At ensiling, it was treated with two commercial silage inoculants: Pioneer 1188 (Inoculant A) and Eco-corn (Inoculant B). The inoculant A and B was applied at ca $2{\times}10^5$ or $2{\times}10^4$ colony forming units $g^{-1}$ DM., respectively. Silage with no additives served as a control. Three jars per treatment were opened on days 2, 4, 8, 15 and 60 post-ensiling to study fermentation dynamics. After 60 days of ensiling the silages were analyzed and subjected to an aerobic stability test lasting 5 days. Results showed that both inoculants caused a more rapid rate of pH decrease and a higher amount of lactic acid production. All the silages were well preserved and were stable upon exposure to air. Inoculants did not influence (p>0.05) the ash and total N contents, but tended to reduce acetic acid (p<0.05), butyric acid (p<0.01) and propionic acid (p<0.01) contents, and to increase the lactic acid content (p<0.01). The lower DM content of silages treated with Inoculant A agrees with the greater gas loss resulting from the DM loss, which was in good agreement with the higher yeast counts upon aerobic exposure. Silage treated with inoculant B had the highest DM (p<0.05) and lactic acid contents (p<0.01), and the lowest acetic acid content (p<0.05), which agrees with the rapid reduction of pH and smaller gas loss. Inoculant B reduced the ADF (p<0.01), ADL and NDF (p<0.05) contents, which also indicates smaller losses of organic soluble material. The control silages contained the highest levels of volatile fatty acids but no lactic acid, indicating secondary fermentation. It was concluded that both inoculants may improve the fermentation process, since silages from all treatments were stable upon aerobic exposure, noadvantage could be attributed to any of the inoculants used.

• Korean Journal of Veterinary Research
• /
• v.34 no.1
• /
• pp.165-172
• /
• 1994

DA-125 is a new anthracycline antitumor antibiotic, which is derived from adriamycin. The potential of DA-125 to induce embryotoxicity was evaluated in the Sprague-Dawley rats. One hundred twenty naturally mated SD rats(sperm in vaginal lavage=day 0) were distributed among three treated groups and a control group. DA-125 was administered intravenously at dose levels of 0. 0.1, 0.3 and 1.0mg/ kg/day. Dams were treated from day 7 to 17 of gestation and were subjected to the caesarean section on day 20. At 1 mg/kg, reduced food intake, reduced body weight and decreased weight of spleen were observed in dams. An increase in the resorption rate and a reduction in the fetal weight were also found. In addition, various types of external, visceral and skeletal malformations occurred at an incidence of 11.9, 41.8 and 14.5%, respectively. Characteristic malformations include exencephalia, gastroschisis, cleft lip, dilatation of lateral and 3rd ventricle, fused ribs, among others. There were no signs of maternal toxicity or embryotoxicity at 0.1 and 0.3mg/kg. The results show that the test agent DA-125 is embryotoxic at maternally subtoxic dose in rats.