• Resources Recycling
• /
• v.32 no.3
• /
• pp.45-56
• /
• 2023

This study analyzed the economic and environmental effect of recycling rhodium used in the non-catalytic field. As an analysis methodology, economic effect analysis applied cost-benefit analysis and resource-saving effect analysis and the environmental effect analysis applied life cycle assessment (LCA). The results show that from an economic point of view, the cost-benefit ratio was 1.28, which was feasible, and the cost reduction was 237,000 won based on 1 g of rhodium recycled and the amount of rhodium recycled was 7.17 billion won in 2025. As for the environmental effect, the greenhouse gas(GHG) emissions were compared between the case of recycling based on rhodium 1 kg and the case of overseas sales. The calculation results show that based on rhodium 1 kg, greenhouse gas emissions were reduced by 99.8%, from 65 kg CO₂eq./kg-Rh when recycling to 28,800 kg CO₂eq. when sold overseas. The results obtained from this study could suggest that rhodium recycling is necessary in Korea where resources are scarce by analyzing the economic and environmental effect of recycling rhodium used in the non-catalytic field.

• Journal of Powder Materials
• /
• v.29 no.3
• /
• pp.252-261
• /
• 2022

Cobalt is a vital metal in the modern society because of its applications in lithium-ion batteries, super alloys, hard metals, and catalysts. Further, cobalt is a representative rare metal and is the 30th most abundant element in the Earth's crust. This study reviews the current status of cobalt extraction and recycling processes, along with the trends in its production amount and use. Although cobalt occurs in a wide range of minerals, such as oxides and sulfides of copper and nickel ores, the amounts of cobalt in the minerals are too low to be extracted economically. The Democratic Republic of Congo (DRC) leads cobalt mining, and accounts for 68.9 % of the global cobalt reserves (142,000 tons in 2020). Cobalt is mainly extracted from copper-cobalt and nickel-cobalt concentrates and is occasionally extracted directly from the ore itself by hydro-, pyro-, and electro-metallurgical processes. These smelting methods are essential for developing new recycling processes to extract cobalt from secondary resources. Cobalt is mainly recycled from lithium-ion batteries, spent catalysts, and cobalt alloys. The recycling methods for cobalt also depend on the type of secondary cobalt resource. Major recycling methods from secondary resources are applied in pyro- and hydrometallurgical processes.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.89-93
• /
• 2008

It is necessary that used metallic can should be recycled from the point of view of environmental preservation and resource recycling. Metallic can is classified into steel can and aluminum can according to the can body material. In Korea above eighty percent of cans are made from steel. In this article, production of cans and current status on the recycling of the used cans in recent years were surveyed. Recycled weight ratio of steel and aluminum can was about 75.6% and 74%, respectively in 2007. And totally it reached 75.3%.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.16-29
• /
• 2008

According to the statistical data of the Ministry of Environment, 47million tons of construction waste were generated, and 96.7% of them was recycled in 2005. However, the recycled products seem to be remained under low quality. Because mixed demolition and construction waste, so called DC Waste, including concrete, brick, plaster, lumber, plastics building materials, paper and some dirt and stone, is very variable and difficult to estimate its exact composition, it is regarded as having little or no value to the construction industry. 'The Research group on recycling of construction waste' was started by the Housing & Urban Research Institute(KNHC), which is sponsored as a large scale national project by the Ministry of Construction and Transportation. This research group intends to establish recycling system through planing, processing, developing practical technology, and eventually contribute to save natural resource and to vitalize the industry. In this paper an overview of DC waste management and recycling technology is given in some detail. Particularly, "recycling law of construction waste" and recent research trends on recycling of construction waste are discussed.

• Journal of Urban Science
• /
• v.11 no.1
• /
• pp.29-35
• /
• 2022

Waste to Energy Plant were recognized as hateful facilities, and there were many conflicts in the location due to social problems such as the NIMBY phenomenon due to problems such as damage to property in the surrounding area, odor, and image loss. Problems such as air pollution and odor are solved by the development of advanced prevention facilities such as electric dust collectors, wet cleaning systems, semi-dry reaction towers, bag filters, and catalyst towers (SCR: Selective Catalytic Reduction), and air recycling facilities in waste storage tanks. However, it is being avoided because of the perception that it is an incinerator. To resolve these conflicts, the government installs and operates resident convenience facilities to compensate residents near resource recovery facilities, provides green space and improves the environment, and supports heating expenses in accordance with the 「Waste Treatment Facility Support Act」. The purpose of this study is to derive implications through the analysis of domestic and overseas case studies for resident convenience facilities and environment improvement for the promotion of local communities in resource recovery facilities and use them as basic data for community promotion and environmental improvement when installing resource recovery facilities in the future.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.62-68
• /
• 2009

Number of vehicles in Korea is gradually increasing and it exceeded 16 million in 2007. Holding of vehicles is connected to disposal, owing to this reason the importance of ELVs recycling has been emphasized. The recycling of ELVs makes the disposal of ELVs easier as well as protects environment and it has the alternative effect economizing the insufficient resource. This study was carried out to evaluate the economic effect of recycling of ELVs compared with disposal of ELVs. The analysis showed that recycling process makes a profit in comparison to the disposal of ELVs. Therefore the government has to consider establishing the regulation related to recycling of ELVs or materials and car manufactures have to develop the efficient dismantling and recycling methods.

• Clean Technology
• /
• v.19 no.2
• /
• pp.75-83
• /
• 2013

In the present paper, we review recycling and applications of titanium binary alloy scraps. The recycling techniques are to successfully prepare low oxygen content ingots using hydrogen plasma arc melting (HPAM) and to produce low oxygen content titanium alloy powders by Hydrogenation-dehydrogenation (HDH) and Deoxidation in solid state (DOSS) process. In addition, as applications of the titanium binary alloy scraps, Ti based solid-solution carbide powders, which would be used for producing Ti based solid-solution cermets with high toughness, were prepared using the titanium binary alloy scraps. These results confirmed that the titanium alloy scraps could be recycled and refined using the HPAM. The resulting oxygen content of the titanium alloy powders were below 1,000 ppm after powderizing. Finally, we had confirmed that the refined titanium alloy powders were able to be utilized as raw materials for preparing the toughened cermets.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.15-26
• /
• 2020

In recent years, there is an increasing interest in environmental friendly treatment of waste-plastics in terms of the generation of microplastics. Accordingly, the recycling of waste-plastics is very important because it provides advantages of volume reduction, mitigation of carbon dioxide emission, and reproduction of value-added products. In particular, in order to recycle the eco-friendly waste-plastics, it is necessary to use a physical separation methods, and among them, flotation separation, which can separate material (i.e., polymer component) in waste-plastics is well known as a very effective separation method in terms of material recycle. Therefore, in this review, the research trend of flotation separation for effective separation of mixture waste-plastics was investigated. In addition, through the reported research results, approaches to use as new functional materials from polymers, which are raw materials for waste-plastics, are summarized.

• Mineral and Industry
• /
• v.26
• /
• pp.13-21
• /
• 2013

This study is carried out experiments on various factors for improving the grade of low grade scheelite by Knelson concentrator prior to the main beneficiation process. Even though there are several gravity separators such as Jig, Spirals and etc. for rougher concentrate, the KC3 Knelson Concentrator was adopted to get better separation efficiency and beneficiating effects for pre-concentration of the low grade scheelite ore. The feed samples was prepared to minus 1mm in size by crushing and grinding. The important factors in the KC3 Knelson Concentrator test were examined in terms of the variations such as number of treatment, feed rate, rotation speed of bowl(G force), water flow rate, pre-removal of magnetic minerals, feed size and feed grade. According to the result of experiment, it shows that the important technical variations are limited in terms of number of treatment, feed rate, feed size and feed grade. The final result shows that the KC3 Knelson Concentrator obtains the scheelite pre-concentrate of about $3%WO_3$ grade and 90% recovery, respectively, from the feed containing about $0.8-1.0%WO_3$ grade.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.3-13
• /
• 2016

This study investigated the environmental and economical assessment for sewage sludge treatment options including biogasification, incineration, carbonization, drying, and solidification. Additionally it is also investigated the economical feasibility of the current guidelines (Digestion efficiency for organic waste = 45 %, Moisture content of sludge = 95 and 93 %) and it aimed to suggest the scientific informations for a policy-making. For the economical feasibility the 30 plants with anaerobic digestion treatment and the 17 plants without anaerobic digestion treatment were investigated. The result of the comparison of sewage sludge treatment options showed that anaerobic digestion+incineration was the most economically feasible considering incineration and drying. For smaller treatment capacity, solidification was the most economically feasible considering carbonization and solidification and anaerobic digestion+carbonization was the most economically feasible considering carbonization and solidification.