• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.199-202
• /
• 2009

Domestic new recycling energy supply is on the way in various form and capacity locally through the support of governmen aid. Among these, solar energy supply is the most in scale and facility. In this paper, we intended to analysis the characteristics of solar energy operation system with season.

• The Research Journal of the Costume Culture
• /
• v.6 no.1
• /
• pp.121-135
• /
• 1998

This study discusses the concept on environment-friendly textile products, environmentally oriented processes of fiber and fabric production, and case reports of environments-friendly products. This study may inspire recognition and necessity of environment-friendly textile products to textile industry and designers ,and also develop the consideration of environmental aspects in the field of textile design and fashion design. Environment-friendly textile products mean not only natural products but also the products reduced the environmentally harmful consequences of their production processes. Because the textile production processes may cause environmental problem. the processes of bleaching, dyeing, mercerising, proofing, and establishing must be carefully controlled. These environment-friendly textile products in this study are divided into development of environment-friendly textile products, recycled textile products, products which are produced by environmentally oriented processes, and recycling capacity in the process of the coming into use. If the textile industrialists and its designers are continuously interested in those environment-friendly products, the textile industrialists produce environment-friendly products in manufacturing process, and the textile and the fashion designers design their products having the conciousness of environment. They reduce environmental pollution caused by producing textile products and are survived in the struggle of existence of the future world trade market.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1408-1411
• /
• 2005

The purposes of daily cover are to control odor and volatile organic compound emissions, to control litters, to mitigate rainfall infiltration. Under usual operation of landfill, the soil layer of 15cm thick is used for daily cover, but about $20{\sim}$25% of landfill capacity is consumed by daily cover volume. Considering our limited land and difficulty in getting landfill site, developing an alternative daily cover material which usually occupies much less volume than soil will be very significant. Also, if we can use waste material for alternative daily cover, we can get additional benefit of recycling waste.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.890-894
• /
• 2003

This paper discuss basic functional construction and plant layout of a ELV dismantling system that can maximize the reusability of tarts and the recoverability of materials by dismantling ELV rationally and efficiently. "Island" type was selected for the system configuration considering processing amount, economical efficiency, and effectiveness. The system is supported by the information system, and composed of dismantling stations and handling equipments. The layout of the stations was determined after simulation and optimization using commercial software package, Arena and OptQuest. The objective of the optimization was maximum profit while the system capacity is considered as constraint. The environmental load of ELV can be minimized when the composition and function of each station are embodied in detail and the system is interfaced with shredding operation.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.375-380
• /
• 2001

MF is a half shaft blast furnace which has been developed at Mitsui Miike Smelter in the 1960’s to treat vertical retort residue. The MF has also been tested for treatment of various recycling materials and wastes. Now various secondaries and wastes (EAF dust, zinc leaching residue, Cu sludge, etc ) are mainly treated. Powder materials are briquetted with reductant before being fed to the furnace. Products are crude zinc oxide, matte, non-hazardous slag and steam. Zinc and lead are recovered in oxide dust, and copper and silver are recovered in matte. The MF can be widely applied to many kinds of materials which contain such non-ferrous metal-valuables. In addition, the improvement in operation and technology has effectively made the unit capacity much larger. The MF now has many advantages for these treatment processes.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1996.12a
• /
• pp.97-101
• /
• 1996

Municipal and sanitary landfills can pose environmental problems due to leachate, landfill gas md unstable geotechnical properties. Most governmental bodies delay the correction of landfill problems or landfill replacement until a crises stage is reached. The replacement of a landfill is often made difficult due to costly regulatory controls, public opposition to siting and the high cost of closure for the previous landfill unit. Solutions to extending landfill life and capacity Involve waste minimization by recycling, refuse compaction and waste-to-energy incineration. Incineration can reduce the volume of refuse by 50-95%. The largest installed bases of municipal waste Incinerators are located in Japan and the U.S. The volume of waste contained in a landfill can be estimated by load count tabulations, weight-and-volume measurements or a material balance analysis based on the trash profile of user categories. for an existing landfill, core samples may be collected and analyzed for use in a material balance analysis. Newly generated refuse contains approximately 50% of the heating value of coal. However, landfill properties vary significantly due to the waste profile of the contributors and biodegradation due to time and weathering. The volume of the Nanji-do landfill

• Journal of Crop Science and Biotechnology
• /
• v.10 no.3
• /
• pp.123-132
• /
• 2007

In this review, we discuss the ways in which our understanding of the controls of nitrogen use efficiency applied to crop improvement has been increased through the development of molecular physiology studies using transgenic plants or mutants with modified capacities for nitrogen uptake, assimilation and recycling. More recently, exploiting crop genetic variability through quantitative trait loci and candidate gene detection has opened new perspectives toward the identification of key structural or regulatory elements involved in the control of nitrogen metabolism for improving crop productivity. All together these studies strongly suggest that in the near future nitrogen use efficiency can be improved both by marker-assisted selection and genetic engineering, thus having the most promise for the practical application of increasing the capacity of a wide range of economically important species to take up and utilize nitrogen more efficiently.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.325-328
• /
• 2009

The 10t/d pyrolysis demonstration plant have been developed for waste tire recycling treatment and value added commercialization. The initial plant model had been started under 2.4t/d capacity with continuous operation, and the commercial plant has been achieved to the 120t/d based on demonstration plant having the tube reactor with chain conveyer attached disk. The next generation pyrolysis plant for waste tire is reviewed and the assignment for plant development is presented briefly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.05a
• /
• pp.57-61
• /
• 2006

Waste foundry sand of industrial waste which is happening by vast quantity according to fast development of industry has much the occurrence amount and processing method is depended on reclamation, and is using by fine aggregate for construction by recycling method among others. In this research Waste foundry sand powder into cement replace fare use possibility availability judge wish to Slump and air content decreased the replacement ratio increases by concrete special quality that do not harden according to experiment result, and unit capacity mass and bleeding increased the replacement ratio increases. Hardening concrete intensity special quality displayed strength improvement to replacement ratio 20%, and tendency that watertightness increases most in replacement ratio loft in watertight property appear. Considering the strength and watertight properties, the adequate usage of waste foundry sand powder is the 10% of replacement ratio.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.43-44
• /
• 2016

Large amount of dredged sea soil is produced in southeast seashore region in during harbor maintenance. Disposal of dredged sea soil has become difficult due to the environmental regulation. Therefore, disposal of dredged sea soil method is to landfill. But, the capacity of the landfill limit state and if the size of the dredged sea soil is in the range of silt or clay, it cannot be used as reclamation material because ground subsidence occur. In this study, analyzed the pozzolanic activity of dredged sea soil. Analysis of the results showed a pozzolanic activity of dredged sea soil. In addition, incorporation of heat treated dredged sea soil increase both 28 and 56 day compressive strength of mortar specimen.