• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.1
• /
• pp.31-38
• /
• 1999

Adsorption of polymeric flocculants and dry strength agents onto the surface of papermaking fibers is critical for their effective utilization since the polymeric substances not adsorbed on fibers or fines keep recirculating in the papermaking system to cause various operational difficulties and loss of raw materials. Problems associated with the unadsorbed polymeric substances generate great attention because unprecedent interests in utilization of recycled papers and papermaking system closure. In this study, to understand the effects of recycling on the adsorption propensity of cationic polyacryamide (PAM) dry strength resin onto hardwood bleached kraft pulp fibers and fines a systematic approach was followed. Never dried bleached hardwood kraft pulp was recycled in two different ways. In mode one recycling experiment never dried pulp was beaten then recycled three times by employing simple drying and disintegrating steps. In mode two recycling experiment beating of the recycled pulp was carried out after each recycling step. Adsorption of cationic PAM on fibers and fines was evaluated employing Kjeldahl nitrogen analysis method. The influence of recycling on water retention value, carboxyl content, sheet density and tensile strength of the pulp was examined. As the number of recycling increased, water retention value of the fiber was reduced due to hornification and this in turn caused a decrease in adsorption of cationic PAM. On the other hand, the carboxyl content of the recycled fibers increased because of the oxidation of fibers occurred during drying, and this caused an increase in adsorption of cationic PAM. Because of these two opposing factors the adsorption of the cationic PAM on the recycled fibers decreased and then increased slightly at third recycling step. Increase of PAM adsorption, however, did not provide did not provide and strength improvement for the recycled pulp fibers indicating greater influence of the honification on interfiber bonding.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.140-146
• /
• 2014

This study investigated the engineering characteristics of non-sintering binder-stabilized mixtures consisting of different ratios of a hardening agent(3%, 6%, 9%, 12%) for recycling industrial by-products through several series of laboratory tests. The hardening agents consisted of two kinds of non-sintering binders(NSB-1, NSB-2), which were developed by using inter-chemical reactions among blast furnace slag, phospho-gypsum, and an alkali activator. In addition, ordinary Portland cement(OPC) was used to compare the engineering characteristics of the stabilized mixture. An unconfined compressive test showed that the unconfined compressive strength increased with the curing time and mixing ratio. Experimental test results indicated that the 7-day strength of the NSB-1 mixture was similar to that of the OPC mixture. However, its 28-day strength was higher than that of the OPC mixture. The secant module of elasticity showed a range of $E_{50}=(42-109)q_u$ regardless of the agents. Based on the results of triaxial tests, the cohesion and friction angle increased with the mixing ratio.

• Clean Technology
• /
• v.7 no.4
• /
• pp.225-242
• /
• 2001

Cleaning process is necessary for machining parts or manufacturing finished products in the industry. Most of domestic and foreign companies are now trying to adopt environment-friendly aqueous cleaning agents instead of CFC-113 and 1,1,1-TCE which are ozone-depleting substances. However, the aqueous cleaning system has a disadvantage due to its generation of lots of waste water since the system utilizes water in cleaning and rinsing processes. Thus, it is very important that monitoring and recycling technologies of the cleaning solution and the rinse water should be introduced in the aqueous cleaning system in order to minimize generation of waste water and to maintain its cleaning performance for a quite long time. In this paper, the cleaning agents utilized in the aqueous cleaning system and cutting oils which are main contaminants were examined and analyzed. And the monitoring and recycling technologies of the aqueous cleaning system which can be employed in the industrial fields were also reviewed and evaluated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.5
• /
• pp.69-78
• /
• 2014

The paper recycling becomes more important technology in terms of the reduction of the municipal waste and of saving natural resource such as wood. However the more utilization of recycled fiber would result in the higher contaminants in the papermaking processes and in the deterioration of the paper quality. The oil marks in the paper products becomes one of the major defects of paper products originated from paper recycling. The coagulation of various stickies in recycled fiber stock led to the oil marks. In this work, we applied functional polymer additives such as the dispersing agents, the fixing agents and the hydrophobic talc powder for the control of those stickies in order to remove the oil marks. The addition of the talc powder showed the great reduction in the oil marks of the packaging paper products. The hydrophobic surface of the talc particles collected the individual sticky materials and prevented their aggregation in the recycled fiber stock, which resulted in the great reduction of the oil marks on the paper products.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.16 no.1
• /
• pp.94-99
• /
• 2003

Objectives : Gram-positive bacteria have became increasing resistant to antibacterial agents, and hence multi-drug-resistant bacterial pathogens are now a major problem in clinical medicine. There is, therefore, a need for new antibacterial agents. In the course of our screening program for potent antibacterial agent from medicinal plants, the extract of Salvia miltiorrhiza (S. miltiorrhiza) showed antibacterial activity against methcillin resistant Staphylococcus aureus (MRSA) and antibiotic-resistant S. aureus. Methods : S. miltiorrhiza was extracted with 80$\%$ EtOH. The extract was suspended in H2O and fractionated successively with hexane chloroform, ethyl acetate, and n-buthanol. The chloroform fraction, which showed the highest antibacterial activity(MICs, 78㎍/ml) against MRSA, was chromatographed on a silica gel column and recycling prep-LC to give the pure antibacterial component. Results and Conclusions : The second fraction among the chloroform soluble portion of an aqueous EtOH extract of S. miltiorrhiza root showed outstanding antibacterial activity against MRSA and antibiotic-resistant S. aureus compared to the other fraction. An active compound was isolated from the second fraction using silica gel column chromatoraphy and recycling prep-LC. Based on these data together with the IH-, 13C-NMR, mass and mp, the active compounds were identified tanshinone Ⅰ, dehydrotanshinone Ⅰ and cryptotanshinone. Among tanshinones, cryptotanshinone and dihydrotanshinone Ⅰ MICs against MRSA and antibiotics-resistant S. aureus were 12.5, 12.5 and 6.3㎍/ml, respectively.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.730-733
• /
• 2001

Separation of PET and PVC is a key technology to achieve effective plastics recycling but no efficient and economically feasible method has been developed yet. The application of flotation was investigated by many researchers but the causes of the selectivity were not clarified. This paper described the adsorption mechanism of wetting agents onto plastics, using the agents which have various polarity and hydrocarbon chain length. It was found that (1) hydrophobic interaction played a predominant role for the adsorption, (2) anionic wetting agents could be adsorbed onto negatively charged plastics with the polar radicals oriented outer part of the plastics, then often depressed plastics more effectively than cationic agents, and (3) PET and PVC could be separated with dodecyamine hydrochloride and sodium dodecyl- sulfonate in the concentration ranges of 1.0$\times$10$^{[-10]}$ $^{6}$ -5.0$\times$10$^{[-10]}$ $^{5}$ and 2.0$\times$10$^{[-10]}$ $^{6}$ -1.0$\times$10$^{[-10]}$ $^{5}$ mo1/1, respectively.

• Clean Technology
• /
• v.10 no.2
• /
• pp.73-87
• /
• 2004

In most of industrial fields, cleaning is employed for removing soils on their products or parts. Halogenated cleaning agents such as CFC-113, 1,1,1-TCE(1,1,1-trichloroethane), MC(methylene chloride) and TCE (trichloroethylene) have been used as cleaning ones in most of companies in the world since their excellent performance of cleaning ability and good material compatibility. However, CFC-113 and 1,1,1-TCE which are ozone destruction substances are not used any more in the advanced countries because of the which are ozone destruction substances are not used any more in the advanced countries because of the Montreal protocol. MC and TCE are now used restrictively at small part of industrial fields in most of countries since they are known to be hazardous or carcinogenic materials. Thus, it is indispensible that the alternative cleaning agents which are environmental-friendly and safe, and show good cleaning ability should be developed or utilized for replacement of the halogenated cleaning agents. Aqueous/semi-aqueous cleaning agents are evaluated to be promising alternative ones among various alternatives in environmental and economical view point. In this study, commercially available 12 aqueous and 6 semi-aqueous cleaning agents were selected and their physical properties, cleaning abilities, rinsing abilities and recycling of contaminated rinse water were measured and analyzed. Aqueous cleaning agents with higher wetting index showed better cleaning ability compared with those with lower wetting index. However wetting index did not have any correlation with cleaning ability in semi-aqueous cleaning agents. It was observed that soil concentration in aqueous and semi-aqueous cleaning agents should be maintained below the certain concentrations which depend on types of clearing agents. More than 70% soils in contaminated rinse water by some of aqueous and semi-aqueous clearing agents could be separated by simple settling method. This means that some cleaning agents with high oil-water separation efficiency will be effiective for recycling oil-contaminated rinse water. It was found that contaminated rinse water with aqueous agents was purified easiy by ultrafiltration method with PAN membrane of 30 kDa.

• Economic and Environmental Geology
• /
• v.54 no.2
• /
• pp.285-297
• /
• 2021

Globally, nuclear-decommissioning facilities have been increased in number, and thereby hundreds of thousands of wastes, such as concrete, soil, and metal, have been generated. For this reason, there have been numerous efforts and researches on the development of technology for volume reduction and recycling of solid radioactive wastes, and this study reviewed and examined thoroughly such previous studies. The waste concrete powder is rehydrated by other processes such as grinding and sintering, and the processes rendered aluminate (C3A), C4AF, C3S, and ��-C2S, which are the significant compounds controlling the hydration reaction of concrete and the compressive strength of the solidified matrix. The review of the previous studies confirmed that waste concretes could be used as recycling cement, but there remain problems with the decreasing strength of solidified matrix due to mingling with aggregates. There have been further efforts to improve the performance of recycling concrete via mixing with reactive agents using industrial by-products, such as blast furnace slag and fly ash. As a result, the compressive strength of the solidified matrix was proved to be enhanced. On the contrary, there have been few kinds of researches on manufacturing recycled concretes using soil wastes. Illite and zeolite in soil waste show the high adsorption capacity on radioactive nuclides, and they can be recycled as solidification agents. If the soil wastes are recycled as much as possible, the volume of wastes generated from the decommissioning of nuclear power plants (NPPs) is not only significantly reduced, but collateral benefits also are received because radioactive wastes are safely disposed of by solidification agents made from such soil wastes. Thus, it is required to study the production of non-sintered cement using clay minerals in soil wastes. This paper reviewed related domestic and foreign researches to consider the sustainable recycling of concrete waste from NPPs as recycling cement and utilizing clay minerals in soil waste to produce unsintered cement.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.4
• /
• pp.100-110
• /
• 2000

Studies were conducted to know effects of the bulking agents (saw dusts, mushroom waste, wheat bran coconut meal, rice hulls) adding o moisture control, fermentation methods (aerobic and anaerobic) and periods (1 to 20 days) of food waste fermentation for animal feeds on chemical compositions and in vitro DDM (digestibility of dry matter). Experiment designs were focussed basically to obtain extension service data. The NDF (neutral detergent fiber) composition in the oak and pine saw dust were 93.5% and 95.4% (DM basis) in respectively. Thus, the fermented food waste feeds using saw dust (50%) increased NDF(12%), and decreased in vitro DDM(48%) compared to those of raw materials before aerobic fermentation. The oak saw dust showed higher DDM compared to pine. Mushroom wastes which is a residues of mushroom culture mixed originally willow saw dust (80%) and wheat bran (20%) showed quite higher feed value compared to both saw dusts. It was found that an in vitro DDM and NDF composition in fermented feeds appeared highly dependent or the NDF composition in bulking agents. With an increase wheat bran ratio substitute mushroom waste showed linearly decreased NDF, and increased in vitro DDM in the fermented food waste feeds. The fermented feeds added bottling agents composed higher NDF resulted in higher NDF and lower in vitro DDM with prolonged fermentation time. The feeds from anaerobic fermentation appeared lower NDF and higher in vitro DDM compared to those of aerobic fermentation.