• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.7-12
• /
• 2003

In scrapped material field, about ten millions ton of waste plastic materials are produced in korea. However recycling rate of waste plastic materials have above 25%. Therefore, it is urgently needed that they are used as recycled materials in order to prevent environment pollution and grain economic profits. In this paper, physical and mechanical properties of light weight concrete using waste plastic materials for aggregates are described in order to develop a light weight concrete with the aggregate made from waste plastic goods, it was carried out many experiments on mix proportion and strength. According to the experimental results, high-strength mortar was necessary to make light weight concrete using aggregate of waste plastic materials. Especially, considering the side of recycling of plastic wastes, it is recommended that recycled aggregates made from waste plastic materials is applied to light weight concrete.

• Magazine of RCR
• /
• v.11 no.3
• /
• pp.14-17
• /
• 2016

• Magazine of RCR
• /
• v.11 no.2
• /
• pp.26-29
• /
• 2016

• Magazine of RCR
• /
• v.16 no.1
• /
• pp.23-25
• /
• 2021

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.1
• /
• pp.123-129
• /
• 2003

The production accounts of domestic by-product is increased after 1990's. It is worried about the life reduction of dump land, as dump land's capacity have reached to limitation and the amount of construction industrial wastes is going higher. Recently, recycling aggregates could be gained from the reconstruction works using recycle process, and the study research of recycle concretes developed concrete application methods. It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study. the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush, and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.51-55
• /
• 2002

The production accounts of domestic by-product is increased after 1990's. It is worried about the life reduction of dump land, as dump land's capacity have reached to limitation and the amount of construction industrial wastes is going higher Recently, Recycling aggregates could be gained from the reconstruction works using recycle process. and the study and research of recycle concretes developed concrete application methods, It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study, the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush. and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.171-174
• /
• 1999

The objective of this study is to investigate the properties of fine particles in the process of producing crushed fine aggregates under various fine particle contents. According to the test results, when fine particles are added as substitution of aggregates by about 10%, it shows that the qualities of interlocking block such as compressive strength, flexural strength and absorption ratio are improved. The application of fine particles provide various advantages in the sides of recycling of materials

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.146-151
• /
• 2013

In this study, the effect of addition of waste glassy slag produced from recycling of spent catalyst (denoted as waste glass hereafter) on the physical properties of artificial aggregates made of coal bottom ash and dredged soil (7 : 3 by weight base) was evaluated. Especially, the bloating behavior of artificial aggregates was analyzed by performing the relation study between the apparent density, water absorption and microstructure. The apparent density of artificial aggregates increased slightly with sintering temperature at $1050{\sim}1150^{\circ}C$, but decreased above $1150^{\circ}C$ showing bloating phenomenon. The bloating behavior of artificial aggregates was decreased so the apparent density increased with amount of waste glass added. Also, the water absorption of artificial aggregates decreased with sintering temperature. Above $1200^{\circ}C$, big fissure and much liquid were formed at the surface of artificial aggregates and these phenomena could be suppressed by increasing amount of waste glass added. The artificial aggregates fabricated in this study had an apparent density of 1.1~1.6 and water absorption of 8~22 % which meet KS requirements for the artificial lightweight aggregates.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.4
• /
• pp.359-365
• /
• 2017

This study examined concrete characteristics depending on the replacement ratio of recycled fine aggregates, which suits the KS F 2573 concrete recycled aggregate standard. As physical properties, slump, air content, changes in the elapse of time and compressive strength were studied in order to provide basic data for activation of recycled fine aggregate recycling. As a result of experimenting recycled fine aggregate concrete, the increase in the replacement ratio of recycled aggregates led to the increase in slump and air content. Also, when the replacement ratio of recycled fine aggregates was 30%, it was judged that there was no problem with constructability. When the replacement ratio was 30%, recycled fine aggregate concrete had a similar tendency to natural aggregate concrete at a compressive strength of 24MPa. When the replacement ratio was 30%, at a target strength of 24MPa, recycled fine aggregate concrete had the same physical characteristics as natural aggregate concrete. This means that a replacement ratio of 30% is appropriate for replacement of recycled fine aggregates. In future, there will be a need to improve the quality of recycled fine aggregates for activating the use of recycled fine aggregates and further research will have to evaluate physical properties of recycled fine aggregate concrete using improved recycled fine aggregates.

• Resources Recycling
• /
• v.16 no.6
• /
• pp.20-27
• /
• 2007

This paper presents a detailed experimental study on the durability properties of mortar matrix made with two kind of recycled fine aggregates(RAA, RAB) and five replacement levels (0, 25, 40, 75 and 100) of the recycled fine aggregates as a partial replacement of natural fine aggregate (NA). The durability properties of mortar matrix was evaluated using compressive strength, chloride ion ingress, sulfate attack and carbonation. The test results indicated that the water absorption and Adhered mortar of the recycled fine aggregate was a major factor controlling durability properties. Hereafter, when using built recycled fine aggregate is expected, appropriate removal Adhered mortar and reasonable replacement ratio of recycled fine aggregates was 25% weight of cement are advised to apply to the concrete materials.