• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.195-208
• /
• 2004

Histogram is a very useful method on various practical aspect. With increasing importance of simple calculation method and convenience, it became the basic method in digital image processing nowadays. However, basic limit of using histogram is losing spatial position information of pixels on image. This paper reanalyzes image by presenting histogram with spatial position information(spatial histogram). Also using that result, level order recursive median filter is realized. Presented recursive median filter showed much improved results on edge maintenance aspect compared to existing recursive median filter.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.143-150
• /
• 2004

In this paper, a recursive digital filter realization for an ionospheric channel model is proposed. This realization is in the form of a cascade of identical second-order all-pass filters, and is determined by only three parameters; two coefficients of an all-pass section, and the number of sections. The values of these parameters are optimized by a nonlinear optimization algorithm called the "downhill simplex method", so that the resulting time delay function closely approximates that of the ionospheric channel model. Comparing with the nonrecursive digital filter realization, it can be shown that the proposed recursive-digital-filter-realization is advantageous in points of view for the numbers of filter coefficients and the realization.

• 한국해양학회지
• /
• v.19 no.2
• /
• pp.133-140
• /
• 1984

Oceanographic applications of digital filters are studied with special emphasis on the convolution filter with Hamming window and the recursive filters. Convolution filters are simple to understand and easy to design but not efficient for a long data set. Recursive filters, despite of the complexities, have advantages on economy and filter characteristic. By means of digital filtering technique we find that the alongshore wind at Pusan and the sea surface temperature at Gampo in summers during 1973 to 1979 are negatively correlated at low frequencies (periods longer than 5 days) but not so at high frequencies.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.6
• /
• pp.950-956
• /
• 1986

In this paper, a direct addressing mode of a microprocessor is introduced to save memory capacity, and also a dedicated digital filter is constructed to speed up the filter processing and to enable an easy selection of the impulse response types. A theoretical analysis has been conducted on the errors caused by the finite word klength, rounding-off and multiplication procedures. The digital filter designed by the proposed method is made into a module which can function as a 7th-order recursive or a 14-order nonrecursive type with a simples witch operation. The proposed filter is implemented on a printed-circuit board. The frequency characteristics of this filter can be controlled by the multiplication values stored in ROMs. A low-pass, a high-pass and a band-pass filter have been designed and their frequency characteristics are verified by actual measurements. For a order higher filer, two filter modules have been cascaded into an integrated filter of 23rd-order non-recursive low-pass type and a 12th-order recursive multiband type. Their frequency characteirstics have been found to agree with the theory.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.151-158
• /
• 2004

In this paper, an inverse filtering technique for the digital filter model is proposed. This technique enables us to obtain a stable non-causal m inverse filter by transforming (approximating) it to a causal stable inverse system. In practice, a causal FIR approximation to this inverse filter is proposed. It can be shown that the impulse response of the inverse filter for all-pass systems is simply the mirror image of the impulse response for the system. Specially, due to this symmetric property of the impulse response of all-pass systems, the proposed technique is more useful for all-pass systems than other systems. In order to illustrate the proposed inverse filtering technique, four examples are presented. Two of them are for all-pass filters. The other two examples are for IIR and FIR filters. Also, computer simulations demonstrate that the proposed technique works very well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.874-882
• /
• 2004

MPEG Audio compression algorithm is the international standard for the digital compression of high quality audio using mechanism of the perceptual coding based on psychoacoustic masking. It is necessary to discuss the constraints on designing of common filter banks for MPEG-2 BC and MPEG-2 AAC decoder system, which is not Down yet, mapping audio signals from the time domain into the frequency domain. In this paper, we present an architecture of common synthesis filter whcih can be used for MPEG-2 BC and MPEG-2 AAC decoder using recursive structure. The proposed algorithm is based on recursive architecture that effectively performs common compulsion.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.159-164
• /
• 2004

This paper proposes a new digital filter implementation which adopts an identical structure at both behavioral and logic level in top-down design. This methodology is based on the observation that multiplication is a form of convolution and carrying, and therefore multiplication is implemented with the same structure as that of a convolution in a recursive manner at the logic level. In order to demonstrate a recursive structure-based FIR digital filter, we select L-tap transposed and systolic FIR filters, and implement them to have a single structure. The proposed filter design becomes regular and modular because of the recursive adoption of a single structure for convolutions, and is very compact in that it needs only two 1-bit I/O ports in addition to significant improvement on hardware complexity without time penalty on the output sequence.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.106-109
• /
• 1986

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.388-390
• /
• 2006

This paper presents a hybrid SoC design for phase detection of single tone signal. The designed hybrid SoC is composed of three functional blocks, i.e., an analog to digital converter module, a phase detection module and a controller module. A design of the controller module is based on a 16-bit RISC architecture. An I/O interface and an LCD control interface for transmission and display of phase measurement values are included in the design of the controller module. A design of the phase detector is based on a recursive sliding-DFT. The recursive architecture effectively reduces the gate numbers required in the implementation of the module. The ADC module includes a single-bit second-order sigma-delta modulator and a digital decimation filter. The decimation filter is designed to give 98dB of SNR for the ADC. The effective resolution of the ADC is enhanced to 98dB of SNR by the incorporation of a pre FIR filter, a 2-stage cascaded integrator- comb(CIC) filter and a 30-tab FIR filter in the decimation. The hybrid SoC is verified in FPGA and implemented in 0.35 CMOS Technology.

• Economic and Environmental Geology
• /
• v.20 no.2
• /
• pp.119-123
• /
• 1987

Hankel transform of order 0 can be represented by a combination of Abel transform and Fourier transform. This Abel-Fourier method can offer computational advantages over a conventional digital linear filter method through the uses of a rapid Abel transform with shift variant recursive filter and of a fast Fourier transform. The Abel-Fourier method, however, is generally less accurate than a well-designed digital linear filter method. In geoelectrical applications, the digital linear filter method seems to be more flexible than the Abel-Fourier method.